This is an easy job, but it can get messed up real quick if you don't look out for these simple tips and tricks! There are some things you need to know!
GREAT VIDEO! In my opinion this is the best one I've seen, personally speaking. This video was like someone reading the instructions and the fine print to you. KEEP 'EM COMING!😢
@@JulioEnriqueLoli no glasses. I literally just use my i phone 11, iphone 14 pro max, and a lot of times i use my go pro hero 8 black! I use fillmore wonders editing software and that’s how all the magic happens! That’s it! No crazy fancy camera here!
much appreciated. I will look into it. As i mentioned somewhere on my channel in one or a few of my videos….I am by no means a Mr. Know it all so I am totally always open for suggestions and tips from others out there to help me become better at what I do. Someone else out there always has a cool trick or two up their sleeves. Thanks! 👍
Hey brother do you have videos of other brands of garage opener, I have seen a few on your channel but they have been with chamberlain. Thank you mate keep doing what you do and it's always a pleasure to watch your videos. Your good man!
yeah for sure. i offered the older lady living there a really cheap rebuild kit etc…. but she said she is on a fixed income that’s why she ordered the belt in the first place. I offered her a new motor and she declined. I left a card and sticker. sometimes all you can do
Question for you. Do you think the heat we've been experiencing could make the tension springs a quarter turn weaker? I had no problem until this heat and the tension cables came off the drums. Im just down the road from you in Corpus Christi. We've had triple digits temperatures for several days. Thanks for the great videos.
I wouldn’t think so honestly. There is a lot of gap created in the springs once they coil and uncoil during the open or close cycle, so there is too much gap all through the coils that can give before the spring itself. Besides, the spring is bolted down on one end and tightened with set screws on the other. However, on the flip side those set screws can slip a little. But overall cables coming off usually is a sign of a little TLC needed on your door. Thanks for the engagement sir!
Nice content, it made me want to start doing this. Btw I do metal fabrication., such as doors, rails, window protection. Etc. I’m located in Tijuana, bc. There’s no such thing as trade school for this so I was wondering if it’s easy to learn by watching these videos and starting to offer this service? What would you recommend to get clients if you’re barely starting? Thanks for your feedback.
Sorry for my delay. This is not hard at all to learn. There are some things you will come to learn and advance on through experience in the field. But man once you do learn it, the money you make due to your knowledge and expertise vs other insane manual labor jobs, this is very rewarding and actually fun as well. When I take a broken mess a customer has, believing they need a new door etc, I like the challenge of doing great work and saving the door. When I see the customers disbelief and impressed reaction….it is truly rewarding
I would recommend yelp to start out. Yelps platform is amazing and the great thing is, is they don’t charge any money up front. So you can set up your profile and get jobs coming in before paying them your first months bill. Its crazy awesome and Yelp will 100% bring you jobs
Thank you for the response and advice. I appreciate it. Like I said love your content and it’s something I’m definitely going to get into. All the best!
I have an Odyssey 1000 and the belt drive bullet assembly broke. A little cheap plastic piece. Is there a metal one that i can replace it with that would be more durable? The one in your video looked way sturdier.
You have to look for a garage door vendor near you. Or you can try to look up and contact I believe its Service Spring Co. If you don’t have a local garage door supplier that would be the route to go
Then you would need to remove the cotter pin out of the end of the motor rail and that will allow the motor/opener rail to come down by hand then you can take the pulley off
This is old but for anyone else struggling, I threaded my belt through from the flat backed metal end where you have to install the long screw and nut. I threaded it before doing all that. The metal piece just fits through. Then while the belt was loose on the ground I attached the clip, screw, spring/clip, and nut etc. Just make sure you thread it in the right direction that it’ll be pulled.
Man honestly….haven’t used them much. I like my Milwaukee tools but seriously, co-worker of mine had dewalt on a job we paired up on and his impact driver outperformed mine my a good shot! So im thinking of that crossover
@@fields1336 its not hard at all to start ur own. Believe me. Its just a leap of faith. But man the good thing about the garage door industry is it don’t take many jobs a week at all to stay afloat financially. Just a great career to get into and there is NOTHING like running ur own gig. So rewarding
Great DIY video. Thank you!
@@garymarsh4009 No problem
Great Video Thank-you so much Sir
GREAT VIDEO! In my opinion this is the best one I've seen, personally speaking. This video was like someone reading the instructions and the fine print to you. KEEP 'EM COMING!😢
Thank you brother! Very generous comments!
Thanks for this tutorial. You answered the questions I had about tightening the belt. Not taking everything down rapidly decreases the install time!
@@MrTerryRay1 glad it could help you. Thank you for engaging.
Great illustration I will change one this weekend
Great videos my guy! What camera do you use to record ? Are you wearing glasses with camera? .. thanks
@@JulioEnriqueLoli no glasses. I literally just use my i phone 11, iphone 14 pro max, and a lot of times i use my go pro hero 8 black!
I use fillmore wonders editing software and that’s how all the magic happens! That’s it! No crazy fancy camera here!
You should get a right angle adapter for your drill. It would save you the trouble of removing the mounting bracket. They run about $20
much appreciated. I will look into it. As i mentioned somewhere on my channel in one or a few of my videos….I am by no means a Mr. Know it all so I am totally always open for suggestions and tips from others out there to help me become better at what I do. Someone else out there always has a cool trick or two up their sleeves. Thanks! 👍
Another great video! Stay safe!
oh yeah. Taking it easy in the heat. Especially now! Too hot!
Thanks for sharing this. Question: Can you use the old tensioner or do I have to purchase a new one for the belt replacement?
@@tommymejia8244 you can absolutely use the old one
Hey brother do you have videos of other brands of garage opener, I have seen a few on your channel but they have been with chamberlain. Thank you mate keep doing what you do and it's always a pleasure to watch your videos. Your good man!
What exactly are you looking for sir? How to program the different units or just basic install etc?
@@dapperdudesgarage all of the above, mate!
I bet he didn't tell the customer that it is an easy job. Ha ha lol
It's time for spring job and rebuild bearings . On that 16x7 door.
yeah for sure. i offered the older lady living there a really cheap rebuild kit etc…. but she said she is on a fixed income that’s why she ordered the belt in the first place. I offered her a new motor and she declined. I left a card and sticker. sometimes all you can do
Question for you. Do you think the heat we've been experiencing could make the tension springs a quarter turn weaker? I had no problem until this heat and the tension cables came off the drums. Im just down the road from you in Corpus Christi. We've had triple digits temperatures for several days. Thanks for the great videos.
I wouldn’t think so honestly. There is a lot of gap created in the springs once they coil and uncoil during the open or close cycle, so there is too much gap all through the coils that can give before the spring itself. Besides, the spring is bolted down on one end and tightened with set screws on the other. However, on the flip side those set screws can slip a little.
But overall cables coming off usually is a sign of a little TLC needed on your door. Thanks for the engagement sir!
Nice content, it made me want to start doing this. Btw I do metal fabrication., such as doors, rails, window protection. Etc. I’m located in Tijuana, bc. There’s no such thing as trade school for this so I was wondering if it’s easy to learn by watching these videos and starting to offer this service? What would you recommend to get clients if you’re barely starting? Thanks for your feedback.
Lost you at tj, lol. All good still like watching 🤘
Hey brother!
Sorry for my delay. This is not hard at all to learn. There are some things you will come to learn and advance on through experience in the field. But man once you do learn it, the money you make due to your knowledge and expertise vs other insane manual labor jobs, this is very rewarding and actually fun as well. When I take a broken mess a customer has, believing they need a new door etc, I like the challenge of doing great work and saving the door. When I see the customers disbelief and impressed reaction….it is truly rewarding
I would recommend yelp to start out. Yelps platform is amazing and the great thing is, is they don’t charge any money up front. So you can set up your profile and get jobs coming in before paying them your first months bill. Its crazy awesome and Yelp will 100% bring you jobs
Thank you for the response and advice. I appreciate it. Like I said love your content and it’s something I’m definitely going to get into. All the best!
Thank you for you educational tutorial
Need to fix mine broken V-bell where I
Can get One for craftsman 3/4.?
Lowes carries craftsman products
@@dapperdudesgarage thank you
I have an Odyssey 1000 and the belt drive bullet assembly broke. A little cheap plastic piece. Is there a metal one that i can replace it with that would be more durable? The one in your video looked way sturdier.
I’ll look into that Laura. I believe those brands have their own belts. Other parts are obsolete unless you can find a specific parts dealer
The belt seems to be okay. It was just the plastic piece that broke.
Where I buy a broken v-bell for a craftsman garage door 3/4 opener 139.
Hey! I’m just starting out on this trade, where’s an easy place to gets door + opener parts? Where can I get the T rail for the lift master trolleys?
You have to look for a garage door vendor near you. Or you can try to look up and contact I believe its Service Spring Co.
If you don’t have a local garage door supplier that would be the route to go
@@dapperdudesgarage okay thank you!
Good job!
Can you explain what to do if there’s no room to remove pulley and nut because it’s too close to the ceiling please?😫
Then you would need to remove the cotter pin out of the end of the motor rail and that will allow the motor/opener rail to come down by hand then you can take the pulley off
This is old but for anyone else struggling, I threaded my belt through from the flat backed metal end where you have to install the long screw and nut. I threaded it before doing all that. The metal piece just fits through. Then while the belt was loose on the ground I attached the clip, screw, spring/clip, and nut etc. Just make sure you thread it in the right direction that it’ll be pulled.
👌👍👌
How do u like the HART power tools? I was thinking about using them
Man honestly….haven’t used them much. I like my Milwaukee tools but seriously, co-worker of mine had dewalt on a job we paired up on and his impact driver outperformed mine my a good shot! So im thinking of that crossover
@@dapperdudesgarage
I work for Precision.. I'm thinking about starting my own company.. I'm in MD ... Business is jumping
@@fields1336 its not hard at all to start ur own. Believe me. Its just a leap of faith. But man the good thing about the garage door industry is it don’t take many jobs a week at all to stay afloat financially. Just a great career to get into and there is NOTHING like running ur own gig. So rewarding
@@dapperdudesgarage
Thanks Bro 🙏🏿
I hate changing belts
easy money my brother
Disregard emoji!