Garage Door Opener and Track Replacement - Step by Step Guide
Вставка
- Опубліковано 7 лип 2024
- Learn how to replace or install a garage door opener and garage door track. I'll walk you through the whole process that will work for any opener type, including Genie, MyQ, Chamberlain, Craftsman and more.
#garagedooropener #garagedoormotor #garagedoor
👍 WANT TO HELP SUPPORT THIS CHANNEL? 👍
Become a channel member! Hit the "Join" button or head to / @lrn2diy
Support us on Patreon: / lrn2diy
📦 PRODUCTS IN THIS VIDEO 📦
• Genie Smart/Quiet Garage Door Opener with Belt Drive and Battery (Paid Amazon Link): geni.us/DYMw
• Genie 8 ft Door Extension for Belt Drive (Paid Amazon Link): geni.us/qfKiY2A
• Chamberlain Smart/Quiet Garage Door Opener with Belt Drive - no battery (Paid Amazon Link): geni.us/KMXz
Links above are affiliate links, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬
• Garage Organization in 4 Steps: • An Organized Garage in...
• Recharge Your Car's AC in 5 Minutes: • Recharge Your Car's Ai...
• How to Fix Broken Cords/Cables/Wires: • How to Fix / Repair Br...
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-merch.creator-spring.com
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q
00:00 Removing the Old Opener
02:18 Assembling the New Opener
08:29 Mounting on Garage Door Side
13:27 Safe-T Beams
16:24 Testing and Setting Up Open/Close Positions
18:10 Installing the Battery
18:58 Installing Keypad
19:25 Final Testing - Навчання та стиль
May I say this is the best garage door opener tutorial on all UA-cam!
Great video. Considering the replacement of my vintage 1990's Liftmaster and this was a nice replacement walk-through. I just bought my replacement opener and watched this video again. My only "old guy" advice would be to hand start bolts you're installing, rather than starting them with the ratchet. Helps you avoid cross-threading things.
I installed this exact garage door opener today. Thanks a ton for your guide, it was very helpful!
Awesome thank you! Can you consider doing a vid adjusting the garage door and reducing some gaps?
Thank you for the lesson .
Keep doing these videos so we could learn from you. Thank you…
Nice timing. My garage door opener stopped listening to all its remotes so I'm shopping for a new one. I didn't know they made them with battery backups.
GREAT call out for the extension. I almost bought a kit and assumed plug and play. Saved me from turning back around and going to Lowes.
Thanks
Good job. Thanks for sharing saved for the future
Very well done, consider shortening the bare wire when connecting to the unit to prevent short circuits if the wire ever gets accidentally pulled.
Just did it solo, was very easy! Thanks!
An excellent job!
Really good video!
Thanks bud for this
Thanks a lot for sharing. You saved me $$$
Just what I needed
Well done!
Hey, thanks to your video I just saved myself $900 by doing it myself. Thank you!
Awesome video
This vid was awesome thanks. Did the whole installation watching this. It made it so simple thank you. 🤙🤙🤙🤙
Great explanation! thankyou. :)
Good video 👍
Good job.
Awesome! Another skill I needed to learn, thank you! 💥👍🏻☺️
Great amazing informative video I give it a 100 and plus
Very clear demonstration p
Nice one man
Great video I have had seen couple of your how to videos that were also amazing. But question to you is I have a genie garage opener. It also uses a rubber belt too but you can't add a backup battery to it. So do you think it I take a short cut by just. Changing the motor and hook it up the existing rail and belt and just reprogram everything else. Your expertise would surely appreciated. Thank You.
Did your unit come with the belt retainer piece of plastic? I noticed mine didn't, I have 7155-TKVE (from Lowes) also a belt driven model, but don't see that piece. I noticed in your video you never covered that piece so I never really thought of it. However I see other videos and they cover this piece.
Greetings, I cleaned sensors, bought two new different remotes, erased all memory... indoor button works fine all the time. Both new remotes must be pressed several times or it works on the first time and then not. Wires seem to be fine even when I wiggle them sensors do not flicker. How can I trouble shoot the geniue motor? Installed 2004. Thank you.
@16:04 is your right most sensor wire shorting to the case?
I have the opener up , but can’t get the turn buckle closer to the door to install the arm. The belt won’t move. Any ideas?
great video! I have a marantec 4700, I want to replace it with another brand. do all garage door opener harnesses the same?
If you're referring to the way they mount, that definitely differs but you can usually work it out with what's there. For the wiring, there are typically just the sensors for the safety beams plus the main button pad, so those are pretty universal.
@@LRN2DIY Thanks! I mean mounting brackets.
Anyone have any ideas why my opener not moving when I jump the white n red ? This is preventing me to install this wireless opener
I had to replace the rollers on my garage door because of wear. If yours is old that might make it quieter and prolong the life of your garage door opener/motor.
Good point - that's probably a fairly inexpensive way to maintain things and quiet it down. We actually had made so many adjustments to my mother-in-law's garage door system that I researched replacing EVERYTHING - door, motor, track, spring, electronics, etc. and it was at least $2000 if I went pretty basic and did it all myself so anything you can do to keep things rolling is worthwhile.
I am planning to install a security camera in front of my garage. Is it safe to drill a hole through that solid wood in the middle above the spring?
As long as it's a small hole (presumably for passing a wire through?) then that shouldn't be a problem.
@@LRN2DIY yes for passing a wire through. Thanks.
How do I fix the rail/track since after 30 yrs it’s now cutting into the top of the garage door when opens
Hi
Do you need to turn off electricity or is it safe to connect the wires
Good explanation for everything. Should make things go a little smoother. Lol. Drove me a little nuts on the pronunciation of clevis, though. It's not cleavis. Sorry, I couldn't help myself 😂
You really covered the code. LOL
Your garage door looks like it was heated up by an extreme amount of heat.
Bruh that crack in your ceiling 😰
Pronounced clea-vise not clee-vise
Klev-is
@@Brody1007 😂
Genie junk
Backpack, person...woman, man, camera, TV.