Creality K1 Unbox, Setup, and First Print!
Вставка
- Опубліковано 26 сер 2024
- “This site contains affiliate links for which I may be compensated” “This site contains affiliate links for which I may be compensated” Get yours here amzn.to/3q9pnW3
#creality #crealityK1 #3dprinting
YT channels
- Gear Report Reviews (original channel) bit.ly/GearRepo...
- Gear Report Firearms bit.ly/3AT5wxB
- Guitar Gear Report bit.ly/3PPkOI8
- Camping Gear Report bit.ly/3PCHD2e
- HMMWV Gear Report bit.ly/2nGKNYV
- Swimming Gear Report bit.ly/Swimmin...
Get Gear Report branded merch at our swag shop bit.ly/GRswagShop
Sponsor inquiries sponsor@gear-report.com
Gear Report used gear
Guitars bit.ly/3Fh04Uq
Links #commissionsearned
Amazon Prime Trial amzn.to/2xN1Z0e
Amazon store www.amazon.com...
Amazon Influencer store www.amazon.com...
eBay ebay.to/2ylqI01
REI goo.gl/EtRGW9
Amazon amzn.to/2zbxkgF
odysee.com/@Ge...
/ gearreport
/ gearreport
/ gearreport
/ gearreport
/ gearreport
Video tools
Studio mic amzn.to/3vyUCdE
Livestream PC amzn.to/3SsFR4U
4k gimble amzn.to/2ZfvZkl
Wireless Mic amzn.to/2PikeZ1
GoPro amzn.to/3saz5TV
Cell phone gimbal amzn.to/3ARtaHt
iPhone 10XR amzn.to/3JPLnK5
DSLR Camera amzn.to/2G46UPd
Mobile camera amzn.to/2Ggdgxa
Audio recorder amzn.to/2TpoD9N
Video editing amzn.to/2t0QDVO
Pistol grip tripod amzn.to/2ShJ1fY
Gear Report Theme music by Brian Crowell
/ br1ancrowell
Go to www.briancrowell.com for more info!
yesterday i got my K1, the first thing i did was:
- quit pfte tube and put a capricorn tube all out the cable chain.
- quit 2 pieces of cable chain for best travel of the chain.
- heat hotend at 200ºc, release the nozzle and squeeze again.
- clean the rods and threaded rod, put the grease coming in the box.
- change the smooth pei coming with the printer for a texture pei.
And slice a rotational spool holder with bearings, uncheck Arc in the slicer and print with 300mm/s and the result is awesome finish.
This printer is amazing!!!
Wow! Good work
And is it very noisy at 300 mm/s?
I didn’t think it was super loud, but with the head running so fast, it does bang around a bit.
You've probably figured this out by now, but it shut down because the voltage switch on the power supply was set on 220. Need to switch it to 115v
I texted Chris so he can check the voltage setting. Seems like it shouldn’t work at all if set to 220, it plugged in to 110v. But it would be nice if this turns out to be the reason. :)
Love both my v1 and v2 most reliable printer out of the box and prints everything including PA6-CF and PA6-GF (Polymaker) effortlessly.
This was Chris’ K1. It had issues and he ended up returning it. Has a Bambu now. I nearly bought a K1 last week when they weee $415.
I had a K1. Sold it right away. If you already have a bambu, you will be disappointed. If you dont have a Bambu and have an ender or something similar, you will LOVE it!!! Its a night and day difference from an ender like printer. Falls short of a P1P
in what ways?
When?
I also had screws on the bottom of my printer when opening. It rattled way to much for my liking. First layer was awfull after 15mins of calibrating. Benchy printed ok but other filaments didn't stick. Only until i switched build sheets with my MK3 did i get a good print. I already have a bambu and so i am comparing the entire exsperience based on that printer. Its not even close to being as good as a bambu. Again, if i only had an ender 3, this thing would be AMAZING!!!! sorry for all the misspelling, i am sofa king buzzed right now for the holiday. Corona. PS, im not driving anywhere or printing anything today. lol
I wouldn’t judge you for Printing While Buzzed anyway.
Incredible that these things don’t come with a switch mode power supply…like virtually every other electrical device in the world these days!
i print over 100 prints now with not issues for this video in here first watch video included on usb stick or check internet how start if you dont know how will be longer daaaa
They quickly identified a couple of issues in the pre-order machines and started shipping a V2 K1 that was much better.
10:20 - Impressive that the K1 apparently managed to extrude filament for the first print without you manually loading the filament with the Extrude feature in the Settings screen. Creality needs to do a better job with a Getting Started guide to help people learn how to use their new printer. Then again, there are a few warnings about the power supply switch needing to be set to 115V for those not in a 220V country, and it looks like you guys may have missed that.
Thanks for watching so closely.
got a bambulab printer and never thought that i like that cloud features that much .. so if creality wanna hold some costumers they realy need a strong cloud service and the ability for multi color printing .. i dont want to miss the AMS anymore .. it got much waste but still better than a bad software error that coolsdown the buildplate when u pause for a filament switch ... creality had shown us the last years that they dont care a lot about software
Hope to see them step up.
Actually I just bought a printer and avoided Bambu BECAUSE of the cloud. I don’t want all of my designs and print history going to any manufacturer. There are serious privacy issues with Bambi’s cloud.
Now a Multicolor (AMS) solution from Creality and you're good to go!
Yeah. That would be nice
I've heard that Creality is working on that. It will probably be released after the relaseas of the K1 Max version, along with the Lidar and AI Camera for that K1.
Chris is anxiously awaiting the Lidar and camera add-ons for this K1.
My complaint on the K1: How come only relatively obscure UA-cam channels seem to be reviewing it? As long as the reputable UA-cam channels are not doing thorough in-depth and critical tear-downs of this thing, I'll be reluctant to believe Creality's sudden turn-around. Even the Bambu has known flaws, so rather than all the "so great" reviews or unboxing videos, give us complete tear-downs exposing the worst parts of the machine. If those are still acceptable, than Creality has a great machine.
I can only speak for THIS relatively obscure YT channel... Chris, who is seen in this video, purchased this K1 himself and was kind enough to let me film his unboxing, setup, self-test and first print in his home. I don't know if Creality is seeding many folks with evaluation units. I do know that this relatively obscure YT channel was NOT given a K1 to review. I can also tell you that I won't be tearing down Chris' new K1 for the sort of in-depth problem-finding mission that you seem to be requesting. If Creality or any other brands care to send 3D printers (we've been reviewing gear since 2009 and receive products from brands every day), then I'll take them to Chris and we'll dig into them. Until then, this is what you get.. :)
I was completely blown away that this kind of speed and print quality can be had for so little $$$, and with almost zero assemly and setup. As in, I had never touched a 3D printer and I could have done what was seen in the video. I've seen too many other consumer grade 3D printers with significant assembly required and massive learning curves just to print anything remotely sucessfully.
Is the K1 the greatest 3D printer ever? Probably not. But it looks like a step in the right direction for consumer 3D printing on a relatively light budget to me. At this price point, it is pretty insane, IMHO... even if time proves that there are parts that aren't perfect.
the product has just now been released and its still to start shipping in mass
@@cexinho I know people who received their purchased units over a week ago. Some came early.
@@huntersharddrive6951 yeah but those were pre-sale units
@@GearreportdotCom well said. No product will ever be perfect. I bought the Ender 3S1 but I'm almost regretting not getting this K1 for just a bit more to print like 3x the speed!
Just bought mine, put it together and the door can't open or close without raising it, because the monitor is in the way, but no biggie though
Sounds like you didn’t push the monitor down in the mounting slots all the way.
Nice video well done 👍 , what about the printing quality
Pretty good. I thought for sure it would be warped having printed so fast, but it looked pretty good.
I spent 2 days cleaning glass out of mine. Especially on the road threads it was a nightmare
Ouch!
I have a problem where it says the bed isnt heating properly
Just bought it
Sounds like time to call Creality or return for a different one. :)
there's a typo in the title and the tags ;)
Thx. Fixed
the reason it shut down because yall didnt set voltage
Yep. Figured that out shortly after turning the camera off.
Is the crealitycloudbinding thing telling anyone else that their device is private and to reset? I turn it off, disconnect the WiFi and that messege still shows up. Any solutions?
No idea. This unit failed about a week in. Ended up getting sent back.
silly question - did you remove the foam from underneath the hot bed or leave it? i didnt see that part in the instructions so i wasnt sure
NEVERMIND, I realized it needs to be removed... another question: There were four rubber cones, I'm guessing those go under the foot pads of the printer? That's where I put them anyway.
people impressed with something we in DIY community had for years :D Its definitely not speed up, just creality ender 3 users think its speed up 😎😎
The breakthrough here is the combo of super easy, fast, and cheap. I absolutely am impressed that anyone can get this kind of speed without having to learn a ton and do a lot of DIY tweaking.
@@GearreportdotCom tbh it’s more software then anything. It the diy community that got us here. Without inputshaping this would never be possible with decent quality. The speeds have never bin hard to reach its keeping decent quality while doing it that have bin hard. But the k1 seem to have tons on of ringing. I have yet to see a print not containing ringing.
We get it, you're cool 🙄
What a shaky video, haven’t you heard about tripods? I’m kind of seasick after this video. 🤢
We do most of our product videos with a tripod or overhead boom arm. However this was not filmed in the studio. We had a choice… shoot the video on short notice with a phone and wireless mics in a friend’s living room where we couldn’t set up our normal kit, or don’t shoot the video. The wonderful thing about YT is that no one has to watch it. But there are folks who want info on this brand new model and will appreciate the effort, even if it isn’t as smooth as anyone would prefer.