It sucks you got all of that carpet up agains your tracks. I have a tracker and use Scottys in my Versatrack. I can mount my Scotty's right to the track and not have to deal with the sharp edges. Great DIY vid
Love the invention. What about the driver side 🤔 it's tougher because of the wire cover. Another issue if you need longer screws there's no inlet to insert longer screws. You cannot go from front the because longer screws can't pass by the console
Thank you for watching as well as the comment! These work very well on the driver's side as well. You may have to adjust the layout of the hold down holes to suit your needs.
This is what I paid. You are correct in higher shipping. There could be a better deal out there. Overall..they have been reliable, decent inventory, good customer service, and acceptable delivery time. Good luck! Subtotal:$39.02Shipping (UPS Ground):$16.11Tax:$2.76Total:$57.89
I used Simpson Strong-Tie 2 inch x 1-1/2 inch x 1-3/8 inch ZMAX Galvanized Angle brace. Saves all the fabrication.
I just made two of my own. Sprayed them with Plastic dip.
It sucks you got all of that carpet up agains your tracks. I have a tracker and use Scottys in my Versatrack. I can mount my Scotty's right to the track and not have to deal with the sharp edges. Great DIY vid
Like the rubber washer idea.
They struggle
Use Teflon washers
Excellent! Thank you
Those will work great. I used 1" thick blocks of black HDPE for everything.
Good choice!
What's HDPE?
You said you would put a link to those knobs from Amazon. I don't see it. Do you have the link or at least the size?
Thanks my brother
Thank you for watching!!
Speedy metals will cut all them to length. Worth it.
Thank you for the reply Luis! You are absolutely correct. It is well worth it. Thank you for watching!
Love the invention. What about the driver side 🤔 it's tougher because of the wire cover. Another issue if you need longer screws there's no inlet to insert longer screws. You cannot go from front the because longer screws can't pass by the console
Thank you for watching as well as the comment! These work very well on the driver's side as well. You may have to adjust the layout of the hold down holes to suit your needs.
What size carriage bolts did you use?
More than one way to skin a cat , Good Job 👍
Thanks for the feedback and big thanks for watching!
The problem with Versatrak....not enough access holes.
I completely agree.
Drill some
Can you put down the model number for the piece of aluminum you got?
Thank you for watching Julie! No problem:
www.speedymetals.com
1/4" {A} x 3" {B} x 3" {C} Angle 6061-T6 Aluminum, Extruded-36"
SKU: 61a.25x3-36
@@LivingWisconsin Thank you. just checked out the site. Shipping is fairly high..
This is what I paid. You are correct in higher shipping. There could be a better deal out there. Overall..they have been reliable, decent inventory, good customer service, and acceptable delivery time.
Good luck!
Subtotal:$39.02Shipping (UPS Ground):$16.11Tax:$2.76Total:$57.89
@@LivingWisconsin where did you get those knobs?
The knobs were purchased from Amazon.