Hey. Thanks for the interesting review. I need ur help, i have an Artemis P15 that i need to replace the Hammer Spring with another more powerful. How can i chose the right one?? The original is 5.5cm lengh, 8mm wide, wire diameter is 1.17. I guess i have to keep the lengh and the wide, but how much do i have to jump for a bigger wire?? 1.4 is enough?? Or i have to go more.
So if i got a carbine and put the HP spring in with a longer barrel, would i now get high power performance just like the High power gun? I live in the USA so i do not need to abide by the 12ft/lb rule
My .177 fac At 160bar and shooting KO 13.43 I get 930 fps no matter if wheel is on minimum or max. I can only adjust speed with regulator. So using the powerwheel to adjust speed depends on which spring is mounted from factory
I thought the colored inserts not only identify the spring but also act as spring dampeners...yet the spring you removed and the spring you installed did not have a colored insert....can you comment on this? thanks
Keep in mind they over simplify this. If you just swap that low power spring in with 140 bar reg your extreme spread will be garbage. Reg will need to be dropped as well to keep gun in harmony.
Hola ponele las medidas diametros ext largo diametro int cantidadad de espiras diametro del alambre Si podemos saver cual es la diferencia Mario Cordoba Argentina gracias un abrazo
Excellent demonstration. These videos do help a lot. Let's keep them coming, thanks.
Awesome job on the step-by-step. Man I love how easy it is. Thank you!
Always greatAOA💪
I wonder how a sub12 .177 compact would react if you put a higher spring in the rifle? And can you actually do it.
Awesome
Hey. Thanks for the interesting review. I need ur help, i have an Artemis P15 that i need to replace the Hammer Spring with another more powerful. How can i chose the right one?? The original is 5.5cm lengh, 8mm wide, wire diameter is 1.17.
I guess i have to keep the lengh and the wide, but how much do i have to jump for a bigger wire?? 1.4 is enough?? Or i have to go more.
So if i got a carbine and put the HP spring in with a longer barrel, would i now get high power performance just like the High power gun? I live in the USA so i do not need to abide by the 12ft/lb rule
Nice!
Is this barrel that comes from the factory suitable for shooting with slugs or do you have to buy another barrel that works with slugs?
Daystate are going to have choked barrels and ghost has low twist rate. For slugs Typically you want an unchoked barrel and faster twist rate.
My .177 fac
At 160bar and shooting KO 13.43 I get 930 fps no matter if wheel is on minimum or max.
I can only adjust speed with regulator. So using the powerwheel to adjust speed depends on which spring is mounted from factory
I thought the colored inserts not only identify the spring but also act as spring dampeners...yet the spring you removed and the spring you installed did not have a colored insert....can you comment on this? thanks
How do i store the extra hammer spring, i mean long period storage..... Lube it in gun oil/ zip bag? Or wipe it dry and zip bag?
My brk ghost has got an extra screw. 3 dotted screw how to I remove this do I need a special tool for this?
Aí são lindas 😮
When you put the low power spring in you didn’t add back in the very first spring you removed. Why is this ?
It is just poor editing ? Was the first spring you removed the ONLY spring ?
👍
Aiwaa 💕👍
Keep in mind they over simplify this. If you just swap that low power spring in with 140 bar reg your extreme spread will be garbage. Reg will need to be dropped as well to keep gun in harmony.
Hola ponele las medidas diametros ext largo diametro int cantidadad de espiras diametro del alambre Si podemos saver cual es la diferencia Mario Cordoba Argentina gracias un abrazo