Love you guys. My AK-V came a few weeks ago and absolutely loving it and finished with decking it out with a sling attachment. Great quality stuff at very reasonable pricing
Looking forward to the Jakl Vuk AK 7.62x39 version. If I may make a recommendation for it, Make it with a functioning bolt catch and custom fouler AK last round hold open mags for it's release. Not only will this set it apart from all the other AK/AR hybrids, but have AK mags that sell like crazy for the platform in general.
Good advice in general for any adjustable gas block firearm. Same advice here works for AK's and AR's, except for the bolt hold on AK's because not all mags do it.
Love the JAKL system and I'm REALLY hoping you guys bring the JAKL 308 to market so I don't have to spend $4500 for a Spear 308! A fully ambi lower to go with it would be nice too I'm sure plenty of customers would be willing to pay a bit for for that festure from the PSA brand! Please make it happen!!
I’ve been saying it from the beginning but no one will listen to me y’all need to change the angle of your brass deflector it is to steep of an angle and is causing the round to get hit into the front of the ejection port if it had a more shallow angle regardless of the gas setting this wouldn’t happen. The early ACRs had the same issue thats why the changed the geometry and y’all need to as well
I love the look and side charging of the JAKL, but it is inferior to my AR-15 with my Osprey Defense piston system. I don't need to adjust it at all and it runs all ammo, suppressed or not. I definitely want to get the JAKL in 308. That will be a solid rifle!
Looked through the entire jakl category on the PSA website and couldn't find it. I then searched "jakl handguard" and there it was, on the very last page. Really hope the patterns are back in stock soon. They look amazing.
Perfect timing, going to break in one of my two new jakl uppers today and they did not come with paper manuals. You reading minds PSA? Also, please make a belt fed jakl upper to compete with MCR's upper, I would be the first to buy one since they own a monopoly on them and want to charge 7k.
T.Rex Arms said their JAKL gas block was not working... "all gas or no gas" would love to hear what the problem with theirs was, or if you corrected it!
So are we supposed to have the 8 position or the 2-4 position plugs? My 10.5 came with the 4 position but I would prefer the 8 so I don’t have to change the whole thing when shooting supressed/unsuppressed
Can we get an HRT rifle? OD green buttstock, OD green buffer tube, OD green hand grip, OD green handguard M-LOK, OD green forgrip. Black rail covers. Black flashlight, black flashlight mount, black pressure pad, black flip sights, black upper, lower reciever, FDE mags, black red dot scope and mount, dealers choice either a black laser or an FDE laser. I prefer black. The correct HRT laser is FDE. Can we get an FDE version of that rifle as well only: FDE buttstock, FDE buffer tube, FDE hand grip, FDE handguard M-LOK, FDE forgrip. OD green rail covers. Black flashlight, OD green flashlight mount, black pressure pad, OD green flip sights, OD green upper, lower reciever, FDE mags, black red dot scope and mount, black laser, OD green muzzle, black barrel, OD green AR parts, Black Dust cover and bolt carrier. That's a sexy gun. Could be once built.
I just submitted a warranty claim about this same exact thing and I feel targeted... That said, it does explain what was happening that day at the range, I thought it was way under gassed but might have been way over gassed.
Why 8 position? Most Military guns are 3 or 4 position, i.e.: closed, open, adverse or closed, suppressed, normal, adverse. Is there a specific reason why 8 positions were chosen?
@@Dylan.More-Veiny yeeeeah they probably won’t answer that because there isn’t enough market for it. I’m not saying ppl don’t want it, it’s just that not enough ppl want it when x39mm is more popular. They’d have to get new machinery and more production lines etc. They may eventually get to making it, just not anytime soon.
Can’t wait to get my own JAKL! Love your mission, products and service to America.
That choco scheme kicks ass. My jakl is my favorite of my ar style rifles.
Love you guys. My AK-V came a few weeks ago and absolutely loving it and finished with decking it out with a sling attachment. Great quality stuff at very reasonable pricing
Spreading freedom is what we do. :)
@@PalmettoStateArmoryVideos wish you would have your rifles in camo more often. Multi cam would be amazing.
Looking forward to the Jakl Vuk AK 7.62x39 version. If I may make a recommendation for it, Make it with a functioning bolt catch and custom fouler AK last round hold open mags for it's release. Not only will this set it apart from all the other AK/AR hybrids, but have AK mags that sell like crazy for the platform in general.
I love my Jakl It just shoots so nicely. Gas is super easy to adjust. I run mine with the OSS 556 suppressor.
We want 308 jakl !!!
Good advice in general for any adjustable gas block firearm. Same advice here works for AK's and AR's, except for the bolt hold on AK's because not all mags do it.
simple and easy. Nice design and nice explanation. Looking forward to my .308 JAKL
Got a jakl from the guys at 2alpha and Tacticon very excited to get my hands on one
Eventually when it comes out, I want the 308 jackal with a nice paint job, so I can set it up for hunting.
Rustoleum
Love it. This is why I want to buy your jakl
I love the camo and the system!
Love the JAKL system and I'm REALLY hoping you guys bring the JAKL 308 to market so I don't have to spend $4500 for a Spear 308! A fully ambi lower to go with it would be nice too I'm sure plenty of customers would be willing to pay a bit for for that festure from the PSA brand! Please make it happen!!
Have three Jakls now .. great rifles.
💪💪💪
My 10.5 runs great unsurpressed on position 5 and position 2 suppressed.
I’ve been saying it from the beginning but no one will listen to me y’all need to change the angle of your brass deflector it is to steep of an angle and is causing the round to get hit into the front of the ejection port if it had a more shallow angle regardless of the gas setting this wouldn’t happen. The early ACRs had the same issue thats why the changed the geometry and y’all need to as well
We also wanted upgraded less heat 556 upper
I love the look and side charging of the JAKL, but it is inferior to my AR-15 with my Osprey Defense piston system. I don't need to adjust it at all and it runs all ammo, suppressed or not. I definitely want to get the JAKL in 308. That will be a solid rifle!
We need the cool camo's back in stock =D
We'll keep that in mind. ;)
2 weeks
is that choco chip camo for sale?
They sell them on their website just have to keep an eye on them when they’re in stock. I’ve seen woodland camo Jakl too.
Looked through the entire jakl category on the PSA website and couldn't find it. I then searched "jakl handguard" and there it was, on the very last page. Really hope the patterns are back in stock soon. They look amazing.
@@nathang4288I found it in 15 seconds. Its listed as a complete gun in the jakl section.
😀😊👍🏼 Thanks Palmetto State Crew 😀😊
Perfect timing, going to break in one of my two new jakl uppers today and they did not come with paper manuals. You reading minds PSA?
Also, please make a belt fed jakl upper to compete with MCR's upper, I would be the first to buy one since they own a monopoly on them and want to charge 7k.
*SWCH* updates.
_Please and thank you._
Stay classy my friends.
hmmm... ;)
Thanks
T.Rex Arms said their JAKL gas block was not working... "all gas or no gas" would love to hear what the problem with theirs was, or if you corrected it!
I think it's because the JAKL is allergic to gays
So are we supposed to have the 8 position or the 2-4 position plugs? My 10.5 came with the 4 position but I would prefer the 8 so I don’t have to change the whole thing when shooting supressed/unsuppressed
On the ‘fully closed’ setting - does **absolutely zero** gas re-enter the system?
Turn the gun into ‘single shot’?
i hope you guys were able to harden the JAKL bolt to stop metal from shaving on the bolt as reported by Grande Thumb.
I think it's because the JAKL is allergic to gays.
Can we get an HRT rifle?
OD green buttstock, OD green buffer tube, OD green hand grip, OD green handguard M-LOK, OD green forgrip. Black rail covers. Black flashlight, black flashlight mount, black pressure pad, black flip sights, black upper, lower reciever, FDE mags, black red dot scope and mount, dealers choice either a black laser or an FDE laser. I prefer black.
The correct HRT laser is FDE.
Can we get an FDE version of that rifle as well only:
FDE buttstock, FDE buffer tube, FDE hand grip, FDE handguard M-LOK, FDE forgrip. OD green rail covers. Black flashlight, OD green flashlight mount, black pressure pad, OD green flip sights, OD green upper, lower reciever, FDE mags, black red dot scope and mount, black laser, OD green muzzle, black barrel, OD green AR parts, Black Dust cover and bolt carrier. That's a sexy gun. Could be once built.
When are you going to get more .300 blkout Jakls in stock again?
Good, now do full ambi lower for jakl
When is gen 2 coming out?
Can you do one for the ar 15 Sabre as well
My 10.5 has never cycled reliably even wide open. I only have 4 settings on the gas block, so maybe there has been updates since I purchased mine.
Mine has 8 got it 2 months ago
I just submitted a warranty claim about this same exact thing and I feel targeted... That said, it does explain what was happening that day at the range, I thought it was way under gassed but might have been way over gassed.
Osaki should make this rifle chambered in 350 legend
Is this california compliant? Can I build this with the psa parts in california?
need a jakl with a CHF barrel
Have you seen @t.rex arms review on the jakl?
Why 8 position? Most Military guns are 3 or 4 position, i.e.: closed, open, adverse or closed, suppressed, normal, adverse.
Is there a specific reason why 8 positions were chosen?
There’s a wide variety of ammo types and suppressors in the civilian market. It helps to have something that is adjustable.
send these to Canada please somehow
Is there an off position for the gas block on the 300 blk version of the jakl?
I need just a stock for my jakl
What keymo 4 prong is that?
Is this the same for ar15s?
What vert grip is on the thumbnail?
That is a Magpul M-LOK MVG.
Love me some jakl!
USA USA USA USA USA!
I'm not bias or anything, but I agree.
What caliber is this?
Any updates on the Vuk? @palmettostatearmory
@@Dylan.More-Veiny yeeeeah they probably won’t answer that because there isn’t enough market for it. I’m not saying ppl don’t want it, it’s just that not enough ppl want it when x39mm is more popular. They’d have to get new machinery and more production lines etc. They may eventually get to making it, just not anytime soon.
@@Dylan.More-Veiny Oh yeah my bad, you're right. I forgot.
Hopefully sooner rather than later. Hopefully its as cheap as their x39mm came out as.
308 please 😉
I'll get a Jakl before I ever get a Spear or Scar, lmao
Thanks for putting uppers without flash hiders out. Wanna scratch one for me so I don’t have to sell so much blood and semen:)
Are Jakl barrels chrome lined or "MG Steel"???