Always enjoy watching your videos. I have applied much of your shared knowledge around my small shop and have never been disappointed. Thanks for the time you spend to help beginners like me with low budgets improve our shops.
Also, if you have to make a C shaped slot around a pivot point, get a cheap end mill the same size as the drill bit, punch through the part making the first hole, then clamp the pivot bolt in a vice with the part in question installed, then install the end mill and slowly rotate the part using the pivot point as the pivot and the end mill will cut the slot perfectly as the pivot point was used to cut the slot. It's much cleaner than drilling a bunch of holes that might not be perfectly aligned then using a file for the next hour.
Incredible build. If you decide to sell plans be sure to let everyone know. I would like to have a sander like that but they are so expensive. Great project. R
Un saludo, "que gran trabajo" si no fuera porque e visto como lo hacia diría que es una maquina comprada y no fabricada por usted, vaya manos, vaya ingenio, vaya acabado.....chapo. Gracias por enseñarnos.
Great build!! Excellent workmanship. LOVE the straightforward design. Keep up the good work. You inspire me to the point of wanting a whole shop full of quality machine tools that I built myself.
If you designed it or not, is a great great job.!..I couldn't even imagine me where you were to. Never I am going to make such animal.!..but believe me I enjoyed a lot just watching you working, and some things I took of your experience. My shop is very small, and so is my experience, my tools, my money, very good job.!..Congratulations.!!
Hi, watching you bend a piece of black metal with holes in it reminds me of a basic principle of blacksmithing. The steel needs to be cherry red to manipulate, it then bends like a roll of butter. You can then lightly tap and make almost any shape you like. Like your build though, makes it within the reach of someone like me without a large shed full of machines.
Always an interesting & good quality video & incredible design & build on the piece. I'm actually welding my frame but you still had build ideas I hadn't thought of so I can make my sander just that much better & more functional. Thanks again for sharing your knowledge & ideas!
Young Je, please come up with plans? This tools you're building are very useful for many of us who don't have the inventive ability as you and could greatly benefit though. Very impressive work. Thanks for the video.
Thanks for the time you spend making your videos. I know that that process is very time consuming. It really is greatly appreciated. But would it be possible for you to show some measurements? A few of the videos I've watched are very interesting, but I'm having a difficult time guessing the thickness of the materials you use, as well as all the other measurements. Thanks!
And just 30 seconds in, A word of advice. Get your self, or invest in (even piece by piece as you replace broken ones), Gun Taps, because you can just turn the drill press on at it's slowest speed setting and as the name implies, shoot right through the hole leaving perfect threads in seconds rather than futz around with channel locks tearing up your drill chuck. I'm lucky to have a 6 foot tall, late 1800's automatic tapper that has an automatic reverse and enough play as to not strip the threads when reversing.
Now this is thinking outside the box solves the no welder problem great job always like watching your videos. Would you be willing to share some rough measurements. thank you
Young Je 밴드쏘의 crown 모양 휠과 같은 원리였네요~ 제가 쓰고있는 소형벨트샌더 페이퍼가 사용하다보면 조금씩 한쪽으로 치우치는 경향이 있어 신경이 쓰였거든요^^; 완전 부러운 샌더머신이예요~~ 제 작업실이 강옆이라 비올때 살짝 걱정되기는 해도 강폭이 워낙 넓어서 아직 수해를 입은적이 없어요~ 그나저나 이제는 한국도 기후가 바뀌어서 가끔 동남아처럼 느껴질때가 많아요...올해는 국지성호우 때문에 제법 피해가 있네요. 무더운날씨에 건강 잘 챙기시고~ 감사합니다^^
Not a hater, but as a knifemaker, I'd try the other designs from Jeremy Schmidt or Chris Fall (also found on youtube). Walter Sorrells said it best-- you want a grinder that's thick and heavy to minimize chatter, and as this video shows, there's a lot of that in this project once the motor starts up (check out the belt when running compared to the one in Schmidt's build). Good for woodworking, I'm sure, but maybe not for metalwork (imho).
Muy prolijo como todos sus trabajos, felicitaciones; pero francamente no comparto la idea totalmente. Comenzó Ud. con aluminio de buen espesor, que tiene un costo considerable, para luego terminar el trabajo con un catafalco de madera. En fin, buen tabajo.
Mr. Young, My compliments to your build and your craftsmanship. May I inquire Please dod you have plans for the build you made? if so may I please request a copy? Thank you very much for sharing this with us all.
Always enjoy watching your videos. I have applied much of your shared knowledge around my small shop and have never been disappointed. Thanks for the time you spend to help beginners like me with low budgets improve our shops.
Thanks for the comment,
Young Je what kind of hammer were you using at 3:01. I've seen one before but I never knew the name.
Jacob Chapman Tack Hammer
Mark Smith فنان حقيقي
Young Je Lame as.....YOU!
Loved this simple no welding build, would you ever consider sharing the plans for this build so that it can be used by your viewers please?
Can discuss
Also, if you have to make a C shaped slot around a pivot point, get a cheap end mill the same size as the drill bit, punch through the part making the first hole, then clamp the pivot bolt in a vice with the part in question installed, then install the end mill and slowly rotate the part using the pivot point as the pivot and the end mill will cut the slot perfectly as the pivot point was used to cut the slot.
It's much cleaner than drilling a bunch of holes that might not be perfectly aligned then using a file for the next hour.
Incredible build. If you decide to sell plans be sure to let everyone know. I would like to have a sander like that but they are so expensive. Great project. R
AD4MRick I can say the same!
AD4MRick me too
AD4MRick I'm in for that 👍🏻👍🏻👍🏻
me too
I really wanna see these plans
Você é sensacional ! Gostei demais do seu trabalho. Parabéns !
You are an amazing Craftsman and inventor. Thank you!
Excellent, great design🤠👍
Gracias desde Chile, compartir lo hermoso ,técnico , económico y útil, estas ayudando a educar. Lo estoy construyendo, te contaré Saludos
I like your design of your belt grinder. Great job
Great video & project. You will get great use out of this one.
Thanks for sharing!
Make your own video always people complaining about everything
Un saludo, "que gran trabajo" si no fuera porque e visto como lo hacia diría que es una maquina comprada y no fabricada por usted, vaya manos, vaya ingenio, vaya acabado.....chapo.
Gracias por enseñarnos.
Great build!! Excellent workmanship. LOVE the straightforward design. Keep up the good work.
You inspire me to the point of wanting a whole shop full of quality machine tools that I built myself.
Thanks for the comment,
Sweet build, I think this is the first one of these I've seen that uses wood and no welding.
If you designed it or not, is a great great job.!..I couldn't even imagine me where you were to. Never I am going to make such animal.!..but believe me I enjoyed a lot just watching you working, and some things I took of your experience. My shop is very small, and so is my experience, my tools, my money, very good job.!..Congratulations.!!
Hi, watching you bend a piece of black metal with holes in it reminds me of a basic principle of blacksmithing. The steel needs to be cherry red to manipulate, it then bends like a roll of butter. You can then lightly tap and make almost any shape you like.
Like your build though, makes it within the reach of someone like me without a large shed full of machines.
Great job!! Excellent melding of wood and metal materials. Hope you sell plans for this at some point. I'd buy and build for sure.
Always an interesting & good quality video & incredible design & build on the piece. I'm actually welding my frame but you still had build ideas I hadn't thought of so I can make my sander just that much better & more functional. Thanks again for sharing your knowledge & ideas!
Young Je, please come up with plans? This tools you're building are very useful for many of us who don't have the inventive ability as you and could greatly benefit though.
Very impressive work. Thanks for the video.
Sorry
I can't do drawing work,
Young Je, where there is a will there is a way. I'm sure you could find someone to help you. It'll benefit you greatly too. Please think about it.
I can't believe you don't have more ppl following. Can you imagine if you have a milling machine? You would have a field day. Great work as usual!
thank you,
Thanks for the time you spend making your videos. I know that that process is very time consuming. It really is greatly appreciated. But would it be possible for you to show some measurements? A few of the videos I've watched are very interesting, but I'm having a difficult time guessing the thickness of the materials you use, as well as all the other measurements. Thanks!
masterful presentation and design.
thank you
Younge Je....... is there anything he can't build?!
Best channel. Your planes are incredible.
thank you so much
احترامي وتقديري لعملك الرائع. ..متابع من العراق. .
That was awesome. I have learn several techniques from you. I enjoy looking at your work.
Holy Smokes! You Totally blow me away. Incredible Build. Really Good Ideas.
Thanks for Sharing.
Great video and awesome build!
WOW....So phantastic build!!!!!! I'm wondering what comes next!!!!
BRAVO MAESTRO,ES UN PLACER VERLO TRABAJAR !!!!!
Gracias,
Good design and construction. Would like to see how you made the rollers!!Thank you for sharing this.
ua-cam.com/video/h9ec3wAHEAc/v-deo.html
I didn't look back, sorry about that. But thank you for the reply.
A very interesting take on the subject. Be sure - I will take an idea or two out of this. Thanks.
I really like the low-cost design. I like how you use the drill press to keep the tapped holes straight
Сильно! Но при наличии такого количества оборудования, не удивительно. У нас на коленке собирают, на так красиво получается, но работоспособно)
Outstanding work! I would love to purchase a set of plans when you have them available.
Sorry,
I do not draw drawings perfectly yet,
And just 30 seconds in, A word of advice.
Get your self, or invest in (even piece by piece as you replace broken ones), Gun Taps, because you can just turn the drill press on at it's slowest speed setting and as the name implies, shoot right through the hole leaving perfect threads in seconds rather than futz around with channel locks tearing up your drill chuck. I'm lucky to have a 6 foot tall, late 1800's automatic tapper that has an automatic reverse and enough play as to not strip the threads when reversing.
Muy buen trabajo saludos
Smart choice of materials!
Now this is thinking outside the box solves the no welder problem great job always like watching your videos. Would you be willing to share some rough measurements. thank you
Brilliant piece of work, Sir. Thanks for sharing this.
young je! your genius, i have never seen someone use tools the way you do- i learned a lot! Thank you!
thank you,
Very good!!!! It's beatiful!!!! Thank you!!!! Sorry, no speaking english!!! I from Brazil!!!
Superb design and build.
Very nice build.
Awesome build thumbs up my friend
Awesome
Well executed design
Another outstanding project! Thanks for your good work.
thanks,
Very good ! Thanks for sharing !
Good
Hi Sir, good Work!! We don´t need plans...but what we need is only the dimensions of those aluminium pieces.
You are a genius!!!
thanks,
Amazing build and strong belt sander! Something to be proud of. I'm sure it will find a lot of use in your shop!
Thanks for the comment,
What an incredible job ! Very nice ! Thumbs up !
thanks,
Muy bueno excelente idea. muy creativo..10..
Awesome build, well done.
thanks,
Brilliant! Very creative and will do the job.
Your metal workmanship is as impressive as your woodworking :)
It's awesome nicely build loved watching your video
Just brilliant thankyou. Love to see plans
This man has some mad skills love watching his videos
What a great job you did. Outstanding work
Jim
대단하다는 말밖에 나오지 않습니다^^
휠이 4개나 달려있는데 샌더페이퍼가 이탈되지도 않고,,,어져스트 기능까지 있다니 놀라울 따름입니다~
만드시는 과정을 보니 감동을 넘어 경건한 마음이 들어요!!
항상 안전목공^^ 하시고 건강 잘 챙기세요~~
감사합니다~^^
드라이브 휠과 트랙킹 휠에 약간의 크라운(경사각)을 주었어요
그러면 밸트의 트랙 저정이 조금 쉬워요~^^
건강잘 챙기시고,,, 참 물난리가 났던데 작업장 피해 없었는지요?
Young Je 밴드쏘의 crown 모양 휠과 같은 원리였네요~
제가 쓰고있는 소형벨트샌더 페이퍼가 사용하다보면 조금씩 한쪽으로 치우치는 경향이 있어 신경이 쓰였거든요^^;
완전 부러운 샌더머신이예요~~
제 작업실이 강옆이라 비올때 살짝 걱정되기는 해도 강폭이 워낙 넓어서 아직 수해를 입은적이 없어요~
그나저나 이제는 한국도 기후가 바뀌어서 가끔 동남아처럼 느껴질때가 많아요...올해는 국지성호우 때문에 제법 피해가 있네요.
무더운날씨에 건강 잘 챙기시고~
감사합니다^^
그런면도 있구,또 밴드쏘는 날을 보호하는 측면도 있어요~
2 x 72 샌더 머신이 제대로 된것은 $ 1,000불도 넘어요,
작업실 피해가 없다니 다행이예요~
Young Je 대~~~박!!
이렇게 저의 wish list에 한가지가 더 추가 되었네요 ㅋㅋ
만약 제 작업실에 물이 들어온다면 엉엉 울어버릴거예요 ㅎㅎ~
Great job! Do you still have the plans with the measures? I wish try to make this belt sander. Thank you very much!
amazing! is the thick piece aluminum?
Not a hater, but as a knifemaker, I'd try the other designs from Jeremy Schmidt or Chris Fall (also found on youtube). Walter Sorrells said it best-- you want a grinder that's thick and heavy to minimize chatter, and as this video shows, there's a lot of that in this project once the motor starts up (check out the belt when running compared to the one in Schmidt's build). Good for woodworking, I'm sure, but maybe not for metalwork (imho).
Gracias a usted por enseñarnos.
Very nice work.
Beautifully engineered, sir. And nicely executed. What size/type motor, if you don't mind?
Pro tip: Hacksaw blades cut up make the best glue spreaders.
Pure genius
thanks,
Really nice Mr. Young Je! How long is the horizontal piece that is sandwhiched between the plywood?
Brilliant as always!
Hello, love the build! Do you have some plans available?
awesome as always mr je.... wow. I was here at 3K Subs and now 34k... amazing work.
thank you,
Excellent job as usual !
Terence Hacker filmi italiani
incredible build and great design. I love your videos.
Supreme execution as always! Great job.
Thanks for the comment,
nice and simple, well done.
thanks,
good ideas and nice fabrication work. very clean details. some measurements would help. I am subscribing. thanks for posting
Muy buen trabajo si señor
Great video as usual. Loved this project, Thank You so much
yeaaahhaaaw....no weldings too.....
great build....really nice sander!!!
thanks,
another wonderful job.
thank you~
Was that 10mm aluminium plate used on the sander? Great build! Looks a lot more sturdy than some of the wooden builds i've seen.
I used a 1/2 inch thick aluminum plate.
very very good
thank you,
You are a great master and teacher! Which is wheel material?
Awesome!! I definitely gotta build one now. Thanks for sharing this.
Fantastic job my friend 👍🏻👍🏻👍🏻👍🏻
thanks,
Young Je your craftsmanship and ingenuity is amazing it's truly a pleasure watching you work..
Really good job on the belt sander
Impressive. Fine work.
All name brand tools as well. No offense. Great machine
So good
Muy prolijo como todos sus trabajos, felicitaciones; pero francamente no comparto la idea totalmente. Comenzó Ud. con aluminio de buen espesor, que tiene un costo considerable, para luego terminar el trabajo con un catafalco de madera. En fin, buen tabajo.
Good job
WoW awesome video, i realy need to move so your my neighbour. I would pay you to make so many items i need for my workshop, great work matey.
COMPLIMENTI, BELLISSIMO LAVORO. BELLO IL VIDEO, MOLTO CHIARO E DETTAGLIATO. 10++
Grazie.
NEL SUO SETTORE, ARTIGIANALE : " OPERA D' ARTE " .-
Fantastic project
What type of motor did you use?
That's one beast of a machine, well built and well done 👍🏼😊
Mr. Young, My compliments to your build and your craftsmanship. May I inquire Please dod you have plans for the build you made? if so may I please request a copy? Thank you very much for sharing this with us all.
Sorry, I can't drawing
great job. is that steel or aluminum that you are drilling, r a combination?
great build, total ingenuity !!!!
this looks pretty well built!......where do you buy your aluminum stock ?