Cool experimentation showing how simple things can be made in many styles. Rooting for you Tim. Hope the move works itself out and you get back into a shop soon.
Can’t wait to see the new workshop in all its glory. Love seeing people fulfilling their passion thru the expertise of their craft. Keep pushing forward Tim!
I really like the simple ones, but the "squeeze the bottle to open" one is a really cool idea. I would love to see a short or something where you show how it works after some tweaks to get the correct amount of throw.
It's good to see someone who is well established in the UA-cam blacksmith realm go back and showcase bottle openers. By the way I prefer both of the cable bottle openers.
My #1 priority in a bottle opener is that it leaves as little damage to the cap as possible. It's a big part of what I liked about your first design and why I bought a couple of them. The ones you've put up for sale now don't seem as likely to do this as well but it'd be nice if that was shown a bit. I just like collecting bottle caps I guess :)
There's one I recieved as a gift a number of years ago - it's a board with a nail in it! It's a piece of reclaimed hickory with a forged nail, not like the cheap pine 2×4 with a 16d nail one's. It works beautifully and doesn't damage the caps.
Any chance I could get a couple of the shank and a couple of the blacksmith but (dull) sharpen the opposite end of the opener so it could slide under the opener of a aluminum can beverage? Then the opener could open glass and aluminum cans as well!
I liked the large round bar forged into a ring with the three dog ears in the center! I like how substantial it is and how it fits in your palm. It's interesting enough to sit out on the counter or workbench when not in use... Have you considered an opener that is shaped like an axe?! Or a blacksmith hammer?
Timothy, you are a mad bottle opener scientist! I love these! Great video man! Oh and my fav is the circle with the projections in the middle. That thing is great! But all of them, even the ones that didn't work are works of art to me!
The moon and the paperclip are probably the contest looking. That shoehorn looking one is badass too with a little tweaking. But I'm gonna side with you. Classic is always preferred.
The super chunky 3 part round palm fittin one, the chunky paperclip, and your fav were top 3 for me. All of them were clever ideas, some would no doubt work very well with very minor tweaking.
Nice video Tim! super cool to see you doing some chill hand forging, your talent as an artist and craftsman really shines! Love your work man, keep it up!
That was a great experiment. I was skeptical about a few. I love when you can tell what the original item or metal was like the cable ones and the rebar one that needed tweaking. Army SE Oregon
My favorite is the one where you put it on the bottle and just grab the bottle to open it would be awesome if you can tweak it and make it work I'd buy it
Stopped at 8:56 befor you tried the different openers - if I've counted correctly, you've used nine different (perfectly fine) bottle openers to make some more ;-) (counting rebar and cable only once) and your openers are much more sophisticated and nicer to watch and use than the original ones great work, I couldn't do it - I would have used the base materials ;-)
We haven't had a "SMASH that subscribe button!" in a while! I love these designs! They're all really cool! I like the paperclip I think it's kinda funny to have this extra large thing to hold sheets of steel or something together 😄 I love the circle with the Y thing. A lot of these pieces are just so beautiful even just as an art piece! The crescent one too! I honestly laughed at how effective the "grab your beer and it opens for you" piece was 😂 I honestly thought you were making a shoehorn at first! Don't give up on that one! It just needs some adjusting on the spacing for the hook. I love to see that you're still into your craft and you haven't given up! Even if you're not cranking out tons of axes you're still making beautiful works of art and awesome content! Keep it up!
Hey Tim Amazing resourcefulness, just worried that the move has caused you drink 12 bottles at the same time! I think I like your second favourite the best.
Uh, Tim I just finished the video, please just make the bolt bottle opener, it might not be as cool as some of the other ones but it's still pretty dang cool. (lil sad to see you in the sun, I know how much harder that must be)
bro make a black smithing app for sleep sounds it's very relaxing hearing scorching hot metal vs almost cooled down metal, different strength metals different cook times
I've been trying to watch this video for a couple of days now, and for some reason, it just won't load. Cleared cache and everything. It's the only video I've clicked on in my subscriptions and from the main page that doesn't load for some reason. Just thought I'd let you know something may be up? but I don't know for sure.
Cool experimentation showing how simple things can be made in many styles. Rooting for you Tim. Hope the move works itself out and you get back into a shop soon.
Can’t wait to see the new workshop in all its glory. Love seeing people fulfilling their passion thru the expertise of their craft. Keep pushing forward Tim!
I really like the simple ones, but the "squeeze the bottle to open" one is a really cool idea. I would love to see a short or something where you show how it works after some tweaks to get the correct amount of throw.
Love it. The bolt is definitely my favourite!
Love the paperclip and the knot.
Nice work, I love how you just use whatever old junk you can find.
It's good to see someone who is well established in the UA-cam blacksmith realm go back and showcase bottle openers. By the way I prefer both of the cable bottle openers.
Bolt, Moon and Loop are my 3 favorites.
Thanks for sharing 🇨🇦
That was cool. Didn’t know you could design so many. I like your favorite bottle opener as well 👍🙂
I'd keychain-carry the paper clip or the loop, I'd also like to see you add or see how these work on cans
The rebar knot just looks cool but the super simple cable one is my favorite.
An awesome idea. That crescent one is probably my favorite across the set.
I really like that short little cable one. Small and simple.
My #1 priority in a bottle opener is that it leaves as little damage to the cap as possible. It's a big part of what I liked about your first design and why I bought a couple of them. The ones you've put up for sale now don't seem as likely to do this as well but it'd be nice if that was shown a bit. I just like collecting bottle caps I guess :)
There's one I recieved as a gift a number of years ago - it's a board with a nail in it!
It's a piece of reclaimed hickory with a forged nail, not like the cheap pine 2×4 with a 16d nail one's. It works beautifully and doesn't damage the caps.
Super fun video, love the rebar knot and the 3 dimple donut best!
YES! He's back with more content. Appreciate your content and work brother.... so relaxing to watch. Always a joy to watch your vids.
Forgive my ignorance, what is the stuff you are melting onto the pieces? I assume some kind of oil?
It’s just bees wax. When melted on hot it creates a protective covering to keep the steel from rusting!
I liked the papirclip opener and the last round one best, but found all to be very interesting
Any chance I could get a couple of the shank and a couple of the blacksmith but (dull) sharpen the opposite end of the opener so it could slide under the opener of a aluminum can beverage? Then the opener could open glass and aluminum cans as well!
I liked the large round bar forged into a ring with the three dog ears in the center! I like how substantial it is and how it fits in your palm. It's interesting enough to sit out on the counter or workbench when not in use... Have you considered an opener that is shaped like an axe?! Or a blacksmith hammer?
The cable one is really cool!
I like the first cable one and the last one. The bolt is my 3rd favorite.
Love the simple bolt one!
Nice job Tim 👍🏻 I like the grab the bottle one, just a little tweak out on the handle and I reckon it'll be gr8 🍻😎👍
love the video as always. I like the paper clip and the knot!
Timothy, you are a mad bottle opener scientist! I love these! Great video man!
Oh and my fav is the circle with the projections in the middle. That thing is great! But all of them, even the ones that didn't work are works of art to me!
Well done! Love making bottle openers!
Wauw, very cool challenge! I like the ring shaped, the lever/grab type and the last classic one from round bar. Well done!
I like the bolt, bloody great design, gonna have to make one,👍
The moon and the paperclip are probably the contest looking. That shoehorn looking one is badass too with a little tweaking. But I'm gonna side with you. Classic is always preferred.
The super chunky 3 part round palm fittin one, the chunky paperclip, and your fav were top 3 for me. All of them were clever ideas, some would no doubt work very well with very minor tweaking.
Love watching it Tim!
I liked the big round one with the three punch marks in it. Looked like it worked really well, too.
I know its a ``Filler Episode´´ but it was very entertaining! Keep it up Tim
I dig “the loop”
Good look to it and it looks easy to use
Cool idea, and if up to me the moon opener gets my vote as the best.
Great Video! Keep em coming!
Great to see all the designs. What was the brownish thing you rubbed on some of them?
The grenade spoon with a little tweaking is a cool idea!
I love how the "Moon" opener looks
Nice video Tim! super cool to see you doing some chill hand forging, your talent as an artist and craftsman really shines! Love your work man, keep it up!
The big ol donut was amazing. The bolt was my favorite though.
I would like to see the shoehorn style after its tweaked. Great job on all of them!
The loop was my favoritt design 😊
That was a great experiment.
I was skeptical about a few.
I love when you can tell what the original item or metal was like the cable ones and the rebar one that needed tweaking.
Army
SE Oregon
6:00 impressive 👌
chef kisses
My favorite is the one where you put it on the bottle and just grab the bottle to open it would be awesome if you can tweak it and make it work I'd buy it
Those are all cool bottle openers except for the solid around one 😜
I like paperclip bottle opener ) 👍👍
My favorite was the grenade spoon bottle opener.i think it'd worth more R&D
I really want to see that grab the bottle one work, and I’d buy the paper clip one for certain
The paperclip is soo cool
Great work as usuall Timmy
I want the bottle squeezer one that one is my favorite although it does need to have slightly less angle in order to work properly but I love thatone
Stopped at 8:56 befor you tried the different openers - if I've counted correctly, you've used nine different (perfectly fine) bottle openers to make some more ;-) (counting rebar and cable only once)
and your openers are much more sophisticated and nicer to watch and use than the original ones
great work, I couldn't do it - I would have used the base materials ;-)
Very cool video, I enjoyed it very mucho !
I would definitely buy the paper clip and the bottle grabber ones.
I like the bottle opener disguised as a giant paperclip.
Lots of ideas 😃
I liked the forge welded ring with three notches
We haven't had a "SMASH that subscribe button!" in a while! I love these designs! They're all really cool! I like the paperclip I think it's kinda funny to have this extra large thing to hold sheets of steel or something together 😄 I love the circle with the Y thing. A lot of these pieces are just so beautiful even just as an art piece! The crescent one too! I honestly laughed at how effective the "grab your beer and it opens for you" piece was 😂 I honestly thought you were making a shoehorn at first! Don't give up on that one! It just needs some adjusting on the spacing for the hook. I love to see that you're still into your craft and you haven't given up! Even if you're not cranking out tons of axes you're still making beautiful works of art and awesome content! Keep it up!
⭐🙂👍 Way to go, Tim!
I think the disk needs more of a hook on the bottom.
How's the move going Eh?
Rework the grenade lever bottle opener. I like that one in cable instead of rebar.
I like the bolt bottle opener
The moon one could be a hit. Lots of crescent moon stuff
Id buy the knot one or the bolt one tim
Nice viedo and i have a question. When do the hammer come back in the shop? Im loking forward to buy 1
Glad to hear it. Another batch hopefully coming this fall!
Sounds like a blacksmith challenge!?!? Set some parameters and let the fun begin
I loved the paper clip it was one I thought that I would like to make
Wonder if you can make a tachical whip bottle opener.
you should make more of these and sell them for some extra money.
cus i know i would buy one and im sure other people would too
Very nice video 😊
Came for the blacksmithing. Stayed for the socks
I like the one designed as a bolt the best, where can I buy it?
tim its been a few years now , hows the titanium hammer holding up and whats the damage on it .
Hey Tim
Amazing resourcefulness, just worried that the move has caused you drink 12 bottles at the same time!
I think I like your second favourite the best.
Who drank all those in one sitting? Did they float afterwards?
I admit, I have some inside information, but... coming in the future there might be some really cool layered stuff coming. If the stars align!
What's that brownish thing you seem to be melting on some pieces?
Try the 1st one that didnt work but use it the other way
The moon knight one is the best
I always use the edge of a table
Smashed the 👍👍👍
Cool Stuff, but as a Male German: Everything with a stable and rigged edge is a bottle opener, even another bottle can be an opener.
Uh, Tim I just finished the video, please just make the bolt bottle opener, it might not be as cool as some of the other ones but it's still pretty dang cool. (lil sad to see you in the sun, I know how much harder that must be)
I was wondering , did you drink all 12 bottles you opened . 🤣 How is the move going mate hope to see you in the new shop soon . Cheers . 🤠
Man I was hoping to get the bolt but I bought “your favorite” before you said it was your favorite lol.
Uh, miss Martin much ? You needed a video right? Lol. Pretty cool. I like the bolt, it's simple
keep forge lit.Forge On. god bless.
bro make a black smithing app for sleep sounds it's very relaxing hearing scorching hot metal vs almost cooled down metal, different strength metals different cook times
BTW the loop was my favorite
Is this at the new homestead?
👍
When do we get to find out where in the country you moved to?
@@Hooligan__-qy7ru This week! :D
What are you doing outside?????
Forging in shorts Timothy?!
Yes, of course you can.
What is he smiring on the hot metal?
I've been trying to watch this video for a couple of days now, and for some reason, it just won't load. Cleared cache and everything. It's the only video I've clicked on in my subscriptions and from the main page that doesn't load for some reason. Just thought I'd let you know something may be up? but I don't know for sure.
Really! Thats not good! I am so sorry, not sure what I can do to help. :(
Could you make a Damascus coffee mug. Try to forge as much as possible
Sign me up for a paper clip or the loop that was around the same size and shape of the paper clip
I see trusses in the background
I spoke to soon. more than trusses back there ha ha.
Yeee