Secret Hidden Fuel Filter INSIDE Some Carburetors (And How To Fix It!)
Вставка
- Опубліковано 13 кві 2023
- Do You Know About The Secret Hidden Fuel Filter INSIDE Some Carburetors?
Is your small engine equipment running only with the choke on, sputtering, dying or won't start? If this screen is dirty, this will slow down or stop fuel from reaching the engine causing your equipment to fail. I'm going to show you how to properly access it, clean it and make your equipment run like new again! Watch this video as I will show you a hidden fuel filter screen that may be plugged in your carburetor. WATCH NOW!!
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅IF YOU NEED PARTS OR TOOLS, CHECK OUT OUR AMAZON STORE ➜ www.amazon.com/shop/stevessma...
For more videos like this, check out:
👉How to Adjust or Tune the Carburetor on a Leaf Blower ➜ • Maximize Leaf Blower P...
👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ • CORRECT WAY To Adjust ...
👉How To Adjust Or Tune The Carburetor On A Weedeater ➜ • How To Adjust Or Tune ...
🔧WELCOME to the Steve’s Small Engine Saloon UA-cam channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
✅Follow Steve on TIKTOK ➜ / stevessmallenginesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #diy #fix #troubleshooting #howto #engine #howitworks #doityourself #lawnandgarden #carburetor #carbreakdown - Навчання та стиль
✅IF YOU NEED PARTS OR TOOLS, CHECK OUT OUR AMAZON STORE ➜ www.amazon.com/shop/stevessmallenginesaloon
For more videos like this, check out:
👉How to Adjust or Tune the Carburetor on a Leaf Blower ➜ ua-cam.com/video/DWPUYJiF6KM/v-deo.html
👉CORRECT WAY To Tune The Carburetor On A Chainsaw ➜ ua-cam.com/video/M6T5JoGXcHY/v-deo.html
👉How To Adjust Or Tune The Carburetor On A Weedeater ➜ ua-cam.com/video/gmhxTvGRtCg/v-deo.html
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/
✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon
✅Follow Steve on TIKTOK ➜ www.tiktok.com/@stevessmallenginesaloon
Your comment about Old Milwaukee beer made the whole video worthwhile. We used to drive over the border to get good " real" beer.
Not much for Anheuser-Busch products anymore as well
Steve you need to get some shiner bock on your shelf
When I saw the OM beer I was thinking to myself "I cannot believe he's drinking OM..." Your comment was timely and perfect! LOL
Right on
Is it worth mentioning the rubber "o" ring "needle seat " where the needle seats...being blown away ?
No you will figure it out 😢
I see your first bet was to go with carb cleaner spray, my first choice as well when working on any component that may contain rubber gaskets or seals. Acetone as a second choice is also a good choice as it will not dissolve rubber, but prolonged exposure will degrade it. This isn't prolonged exposure so a good alternative. I definitely wouldn't go brake cleaner as much too corrosive for seals and gaskets only potentially lead to much bigger severe issues. Every cleaner has its place in our tool box, might be a show on that one as not many people understand the nuance of which product to use in what circumstance.
Missed April this week, lets get her back on the vid soon it's nice to have a bit of banter between you two from time to time. I appreciate April asking the questions that some of us novices might have but afraid to ask ourselves.
Bang on with the Old Milwaukee ugh!
Love the channel, always look forward to catching the next episode.
i would imagine you didnt need to let it sit overnight. acetone evaporates very quickly so I'd say whatever it does it does it within a couple minutes. shooting acetone in there with a little syringe would probably work great. Cool video your right many don't know some carbs have those screens.
1:12 “And by the way, Old Milwaukee’s beer pairs really nicely with carburetor cleaning. Because they both suck!” 😅😅😅😅😅😅😅😅
HAY STEVE where's April ??? Haha thanks for the information. Cheers brother. 🍻
I laughed out loud at the Old Milwaukee comment. I couldn't agree more, lol! Cheers from Calgary.
Right on
lolll hard to trust an Old Milwaukee's drinker but if you say that sucks,,, I'll give you confidence loll !
Good continuation !!!
Better put April's nail polish remover back before she finds out you're using it in the shop!
OOPS! Thank You...
Acetone has a very high evaporation rate, in fact the highest of commonly available solvents. While it will "dissolve" all manner of "sticky" material (adhesives, deposited residues, etc) it evaporates so quickly that unless the released material is carried away by the flow of the solvent it can be redeposited as a thin film on the substrate. In the case of a filter or screen this may be enough to reduce the blockage but can accelerate re occurrence of the problem. Following an acetone application immediately with pressurized carb cleaner (most brands have acetone as well as slower acting solvents) will remove this remainder. You can see any residue removed this way by holding a white cloth over or near the exiting stream of cleaner
evaporation is relative to surface area put a plug on top it wont evaporate
Yep that was my problem! Thank you 😎
What happened to your daughter April? Another way to avoid using acetone is to convert to propane and never have to clean a carb again, .Have you made any progress on your upcoming propane conversion?
Daughter 🤣😂🤣😂 Nice one .
We use to call Old Milwaukee Old Mil-Yuckie! 😂🍺 Todd from da Upper Peninsula of Michigan.
Hey Steve, thanks for the info. My chainsaw won't start and after cleaning out the carb, I found your video. Didn't know there might be a screen. Tore the carb open and found the screen. I can blow cleaner in thru the inlet elbow with no problem but I can't from the needle valve out the other way. Screen looks good but there is no joy! I'm going to leave the screen out and try that. Thanks for all the help you have given to us.
Great information , but don't use the air hose on the gas inlet side , it will blow the needle seat out , then you are screwed , I learned the hard way
You can also blow the screen out the other way on some, apparently.
Good video Steve. I am dating myself but when i was younger Old Vienna and Henninger were the top two beers that sucked where i lived in Southern Ontario.
As a side note, I use canned air (keyboard cleaner) to clean carb passages as followup to carb cleaner. Alot handier than an air compressor.
Thanks. My rototiller was running fine last season. Now it idles fine, but stalls as soon as I start to till.
Old Mil. The beer of my youth growing up in Northern Wisconsin. It was cheap and it was beer!
Agreed!
Cheers from Norway, the land of freezers!
Shanks Steve. Good information as ALWAYS!
Thank You...
Knowledge is power Steve. Thanks for the great tip.
Any time!
Thanks for the info.
Any time!
Steve, thank you for taking the time to make these useful videos. And like you I agree it is important to stay hydrated after work as well. 👌
You're Welcome...
I'm having a terrible time cleaning these chonda carbs (Australia) not sure what's in the fuel that makes it go crusty but after watching this i'll be trying some acetone next (needle and seat is the biggest problem, same for the Briggs and Stratton quantum carbs) i first thought you'd just poke a skewer through that screen but then realised it could just end up pushing in and blocking it worse.
THX, great info. appreciate your channel! always relaxing to watch and learn. 😊
Our pleasure!
Thanks for the carb cleaning tip Steve.
Any time!
Thanks Steve.
You're Welcome...
Interesting! Thanks for the tip!!!
You're Welcome...
Very good tip & that is great to know Steve! Thanks! 👍👍
No problem 👍
You are right, plus Carb Cleaner and Old Milwaukee pretty much tastes the same too
Old mud and cleaning carbs suck, lol best line of the week and so true. Thanks Steve for great videos!!!
Right on
Please talk about the little screens and welch plugs in 2-stroke carbs. I don't think many people understand them.
these ones are not hidden, rrreally obvious to see n clean !!!
Nice one Steve
Thank You...
Good video Steve.
Thank You...
Thanks Steve, great advice.
You're Welcome...
Love the little things. Not sure if in your field,maybe a link. Looking into a robot mower for my backyard. Disable vet with hip issues and getting old. I use my mower for small front yard but the back is too big for me. I’m running out of affordable kids in the neighborhood for the back. Thought or link on robot mower would be helpful.
Thanks Steve. Great stuff! Jimmy from Peru
Our pleasure!
Combustion chamber conditioner can also clean carburetors when left to soak.
Always helpful
Glad to hear that!
Thank you Steve
You're Welcome...
lol old Milwaukee beer pairs well
Just an FYI, acetone will soften many plastics and can destroy some rubber gasket materials.
Another great video,Donyboy73 did a video while back on this I think it was a Briggs carburetor.
Great tip!!
Glad you think so!
Great secret info -I have a poor flow from tank to carb on lawn tractor .With all removed from tank to carb clear flow but not when reconnected -any ideas ???
Thanks Stevo. I never knew about that sneaky little fella being in there 👌👍
Happy to help
🤣🤣🤣 OLD MILWAUKEE ( MILL YUCKIE) Great advice Steve O , April may want a cut on that repair bill due to supplying the nail polish remover lol! Cheers 🍻 and Steve Out!
Right on
I love your videos very informative 😊😊😊😊😊😊
Thank You...
Old Milwaulkee is a great tasting beer, "BUT" only if it is fresh, and the bottle is better. The best beer I have ever had was a Qt. bottle of Old Milwaulkee that was fresh. It doesn't have a big turn over, so most gets old from the distributers before it gets to the store. And then, yes it sucks like "any" old beer. That's the whole story on IPA's the had a longer shelf life to make the long boat ride from England to the British in India. As with carburators "old" gas can mess them up. To me Michelob ULTRA tastes like dish water, sadly I do know what both taste like. So I fail to understand why anyone would drink Michelob ULTRA, but to each their own.
As for the carburators, and all the engine tips, thanks.
That was very interesting
Right on
Nice video.
Thanks!
I found it hilarious that you possibly thought that Old Milwaukee might be good beer! Beast Ice is the way to go for getting hammered on a budget!
I would take a length of fuel line hose- put it on the inlet barb- then put acitone in the hose and prop it up and let it soak 🤔
AWESOME!
Thanks!
Will the acetone damage the rubber needle seat?
👍👍👍Thanks
Welcome 👍
Old Milwaukee is good and so is this informative video...lol...Peace y'all
Right on
Carb spray tastes better than Old Milwaukee beer.
Won't the acetone melt the plastic fuel inlets and needle valve seats? If it doesn't evaporate straight away. I have melted plastic with it; in fact this is a way to do plastic repair. Melt plastic in acetone and use as a plastic glue.
You didn't need to let it set overnight as acetone evaporates very quickly. The job was probably done in less than 10 minutes. Good to know acetone is safe for that though.
I’m glad you didn’t run your beer through the carb!
Can the Gen start if the screen is broken?
Lmfao, hey Steve you need to save the kokes for the ending. I had to watch it twice cause the first time I was laugh all the way through it. Not that there's anything wrong with watching twice.
Right on buddy! Thank You...
the last carb problem my family had was that little 90 degree plastic barb fitting was cracked.
In Australia these damn little mud wasps put mud, spiders in suspended animation and baby wasp pupae into any engine left sitting around... my chainsaw was loaded all up under the throttle linkage, they also like to plug the little breather pipe on honda carbies... Cheers thanks Steve
That’s why they renamed Old Milwaukee to “ Old Mule Hockey”😊
Right on
Also called Old Gluewaukee.
Acetone? Well, I find that squats help.😂
I notice I am the only "like" on your comment. i would guess all the men failed to understand it,,,howver., they did get the beer jokes.
Steve you have to try "Sleeman Honey Brown Lager" 😊
YUMMY!
I thought you were gonna say that Old Still beer was good for soaking carbs, since it will rot your gut!
...they both suck!"...a Steve Classic! 😂
LOL! Right on Gary...
Nabil Nader
0 seconds ago
Hi Can i use Honda silencer mufler on Briggs &Stratton flat head engine (5 h/p)
Reason I’m having 100 dpi and that’s very loud
The engine is mounted on old Columbia snow thrower
Thanks for your help
Thumbs up for knowing what we know in Wisconsin: Old Milwaukee sucks.
Thank You...
Steven Stifler AKA the stifmeister?????.
How can I ask question and get answer?
So, being as acetone is flammable what would be your thoughts on dumping a bottle in to mix in your gas can as a cleaning agent? An example one bottle to a 5 gallon can.
Keep in mind, acetone will soften plastic.
Not ALL plastic!
that'll likely cause serious pre-ignition (knocking)
@Steve's Small Engine Saloon true. But it will eat up a screwdriver handle. Don't ask me how I know
Would you say acetone works better than carb cleaner?
yes
@@StevesSmallEngineSaloon I may try cleaning a carburetor with it one time and see how it does
Beginning of video Steve says, Milwaukee's Best beer sucks. End of video, Steve says, cheers and drinks it. As long as it's beer, drink it?
👍
Guess I've never seen a screen on one , or never looked for it .
Now hold on there pilgrim.Your carb cleaner may be a problem but don't blame it on a reputable beer
You can tell Steve's shot carb cleaner in his eyes before. ;-]
OUCH!
Curious cats wanna know what type of plastic would be used. In That interior barbed elbow, as acetone can react to chemically cured plastic types. Just wondering please don't reply. Just keep em coming, going, or flowin. T Y P
I hope you didn't steal that nail polish remover from April...
👍🏻🍻
Doesn’t carb spray swell and damage the rubber seat that the needle contacts!
Depends on the brand! They are not all the same..
OM’s😊
And we all know that every manly man of a mechanic should have a little "nail polish remover" on hand. Nudge, nudge, wink, wink
I stole it from my daughter! Dont tell her....
👍👍👍👍👍👍👍
They both suck 😂😂 great one there Steve
Old Mule beer....
We call it old kill dogee.
Whats wrong with Old Milwaukee Beer?
They both suck 🤣🤣  Nice video Steve, I always learn something. Thanks
Right on Mikey! You're Welcome...
The "Walbro" 2-Stroke Carboretors" have these as well, but Steve never addresses how to replace them.
Sure did!
Ol Milwaukee used to be ok they chamged when they took the ww2 murels of pretty women of the cans
Acetone you say .. overnight .. and you really didn't have any temptation just to drill this hole thru?! .. somehow I doubt it :))
How is that possible when I said it was an elbow???
@@StevesSmallEngineSaloon Sorry, it's my English .. the elbow is 90 degrees and opened at both ends .. so to make a proper hole in that darn screen shouldn't be a problem .. its exact location can be measured with a piece of wire .. who the heck was such a smart guy anyway to put the filter in a place that can't be opened for cleaning ... 🤔
Oh by the way that beer is the worst on the planet☹️
OMG because they both Suck !! I almost fell out of my chair laughing.
LOL! Right on