Perfect. The cup removal tool wasn’t the best I had to wait for 2 more to be sent. Be very careful when removing the cups just take it slow. The directions didn’t say to screw it in all the way and back it off a couple turns. Other than that I’ve driven 25k miles and it’s all good now. Another thing to note is you will have to drain your water separator like every 30 miles whenever the light comes on while driving, the intervals become longer and longer until it’s all seperated out. Probably took like 4-5 tanks before it was all out. It’s definitely the right fix and good quality parts. Good luck with yours.
@@guadalupecantu7292 yes, injector cups were leaking into my fuel system. I found this out when I drained my water separator and it was red coolant coming out.
Could this fix my cooling system pressurizing problem? .................. Head gasket has been replaced three times already and head shows no signs of cracks.
Headgasket almost never fails on ISX or X15. It's always an injector cup or your liners sink. Diagnosing a problem correctly is 90% of the battle, but a lot of money and time saved doing it the right way.
Just received my kit got everything apart ready to install it! I will let you know how it turns out I hope this works out good!
How did it turn out?
Perfect. The cup removal tool wasn’t the best I had to wait for 2 more to be sent. Be very careful when removing the cups just take it slow. The directions didn’t say to screw it in all the way and back it off a couple turns. Other than that I’ve driven 25k miles and it’s all good now. Another thing to note is you will have to drain your water separator like every 30 miles whenever the light comes on while driving, the intervals become longer and longer until it’s all seperated out. Probably took like 4-5 tanks before it was all out. It’s definitely the right fix and good quality parts. Good luck with yours.
@matthew6202 Thank you.
What was the problem you had with the cups or what was it leaking ?
@@guadalupecantu7292 yes, injector cups were leaking into my fuel system. I found this out when I drained my water separator and it was red coolant coming out.
Does the ISX 15 have valve caps under the bridges
If this works everytime then it is a fantastic idea. 👍😁
Me seeing this the day after I installed the wedding rings😂
Can i have the link for the tools to remove the "wedding bands"?
Could this fix my cooling system pressurizing problem?
..................
Head gasket has been replaced three times already and head shows no signs of cracks.
Headgasket almost never fails on ISX or X15. It's always an injector cup or your liners sink. Diagnosing a problem correctly is 90% of the battle, but a lot of money and time saved doing it the right way.
What do you do when the cup starts spinning in the head
Hi we're I got the tools for that job tku
Can you buy just the cups ?
Yes, you can: industrialinjection.com/products/cummins-isx-qsx-single-cam-torque-lock-injector-cup-kit
Where can I purchase this kit
industrialinjection.com/products/cummins-isx-qsx-single-cam-torque-lock-injector-cup-kit