False floor and Van Vault sliders in the NEW Van, Electrician
Вставка
- Опубліковано 28 вер 2020
- Finally got an new van!! with air con!!!!
Van vaults sent me two Sliders to install for tool security,
link to the sliders here www.vanvault.co.uk/slider
van vaults Insta / vanvault_official
Tracer pens link: amzn.to/364va2N
Van tracking link WEBSATPro (VAN-GUARDIAN) call Dan on 08003167600 - This is a dedicated number with my discount included OR Alternatively visit the website and request a call back www.van-guardian.co.uk
Tier 1 is £230 for installation and year subscription for GPS tracker, mobile immobiliser and travel statistics
Tier 2 is £330 for installation and year subscription for GPS tracker, mobile immobiliser, travel statistics, Distance data from vehicle on board computer (CAN bus) Fuel level refuelling / losses (CAN bus)
Engine speed, Accelerator pedal pressure (CAN bus) Precise fuel consumption, average consumption,
idling consumption (CAN bus)
Engine working time, idling time (CAN bus)
Distance data from GPS
Any question feel free to ask Dan
They’re called shear nuts. They’re used on a lot of things like security fencing so that you can do them up easily with a socket, but once the head shears they’re a pain to get off again without the right tools and some patience! When you’ve sheared a load of paling off a fence, then the customer decides they want the corner post moved somewhere totally different, being the apprentice it’s always my job to try and get them off again 🤦♂️
Welldone mate 👍
There’s no other feeling than a new van and when you kit it all out knowing that the layout and cleanliness is only going to last for one job 🤣. They are great vans mate enjoy 👍
As a steel fabricator I helped my mate fix his new slim slider van vault into his brand new transit connect. Instead of drilling the floor I made a frame that bolted into the existing floor tie down points and the van vault then bolted into that. 👍
Grumpy One, That sounds a great way of doing it, no drilling the floor, genius 👍🏼
Add a fire extinguisher, you never know.
Nicely done on the fitting out!
Shut up mate
That’s a cracking van, good choice. I am loving the front grille. Thoroughly decent of you to save the old one for Adam.
The 2018/19 transit custom is a dream to drive. Desperately trying to get my boss to get me one when mine gets replaces lol
Loving the van so far. I can't wait to see it when its all finished. Really enjoy watching all you videos.
Happy new Van day.... That looks proper nice Nick
Congrats on the new van. It’s looking great so far. 👏
Best of luck with the new van looks great good to see a hard work company doing well👍
Just done something similar with my van (only a combo so had to design it well) slider one side, space for steps and 2 x fixings trays the other, false floor and space for my hand tools at the front / sliding door end. Working well for me so far
Looking good pal look forward to seeing the van all finished 👍🏽
Great job, iv done similar, I have 4 slider draws, and 2 boxes built i my custom, with sliding rear racking and a slot in the middle floor to roof for my ladders and leaves ect.
Great job Van. looks fantastic you work hard you need a new van you need a van that does your job it is brilliant
Things are looking up 👍👍
Time for a new reg plate “bundy 10”
😂
A good dollop of "blue" (marine) grease over those bolts will protect them well nick! Really thick and resists splashes, and short term high pressure spray passes.
Where was Adam in the boarding out of the van great planing on shelf arrangements Adam could have climbed in the sliding boxes for u lol can't wait to see finish out shelving
Looks good already mate 👌🏼 love the front grille 🔥
Thanks dude
Awesome job.
Well done mate looks great
How do they say it "well jel"? Looks very nice Mr Bundy. You'll have to get some nice seat covers for those sausage mcmuffin bits that fall into the seat while you're driving 🤣.
Nice van bud and looking good on the inside to well done 👍🏻
😂 Your making out like your old transit custom is a knacker, when I'm still rolling round in a 2004 transit 😂 be humble
Mate I’m still using my 1994 transit tipper 😂
The old ones are the best ones
@@transit1199 yep, I had a ‘17 transit crew cab , awful, constant electrical faults
Are you Irish?
The body work on the customs are too weak
Very nice mate!
tidy van mate got the same one in blue! Also have the same slider drawers, was like deja vu watching this lol I put mine near the bulkhead with ladder racking above them.
I’ve got a long wheel base custom, it was fully racked out in brand new bott smart racking the previous guy had installed and never used, I built two false floors, the bottom one houses a set of Zarges three ways and a set of 6treads. Second floor is about 4in higher and allows you to use the through loading still, totally mad blocking it having a roof rack is a pain in the backside for getting into car parks etc, then built a boxing against the bulkhead for a set of 5 treads that go width ways ☺️ works a treat. Van looks good though 👌
Well done nick
sweet ride dude. Nice.
Great content man! Really helped me out, thanks 🙏🏼
I made a step ladder rack using galv conduit, ( sort of a U Shape both ends ) fixed to the top of the van .. they slide out nicely .. just an idea 👍
always a good video to pop up
Lovely looking van mate. Hope i get a new one soon.
Don’t forget to leave access to your rear light clusters for bulb changes.! Looking good though. 👍🏻
Looking ace Nick 👍👍 definitely would love to see the finished product. Watched you on the Monday Club 👌
Monday Club ? 😳
Andy Kirwan here you go 👍
ua-cam.com/video/0fd7KBEkpK0/v-deo.html
Love the van bro 👍❤ good work good videos
Nice van Nick
Nice van 😎👌👍
Nice wheels and so so clean 🧱👍🏽
Nutserts or rivnuts are great for fittings in van. The tool is only £20. Black vans a very dark inside. I fitted white sticky back vinyl to the inside of the roof and 12volt LED strip by the roll from eBay get the silicone coated stuff. Makes it loads easier to find parts on your shelves. Smart looking van.
Hi Nick ,I also own two of those exact van sliders like you .
Try and keep the heavy stuff towards the back as the runner wheels end up wearing out inside.
I've got all the m18 gear to the back and test gear in the front.
Dividers can be bought but it's cheaper to cut your own.
As far a stuffing about with bolts etc over here in Australia we use 500 series tek screws which cut their own thread even through thick H beams.
One surprising thing is that although Van vault is a UK company they sell them to us cheaper than you get it in the UK.
Great videos mate , I wish we had something similar downunder.
Dave in Western Australia
Nice van
Wanna do something similar myself mate, thanks for the great vid
That's quare sound giving the apprentice his own van
Love the new van mate a little envious 🤣🤣🤣 plan is to keep the van for another 2 years then buy a new van 🤞Lithium grease for the wd-40 range for the runners
Yeah unfortunately WD-40 is all I had available 😅
Proper class
I have a new Transit Connect, i am in a bit of a dilemma regarding secure storage, i ply lined and carpeted the roof and sides back in April. Now i am starting out on my own, this seems a great solution, adding a false floor on top. I already have a fully plywood floor with sound deadening underneath. A Transit Custom would've been ideal, so i need to make the most of what i have. On a side note, that front grille looks part.
Definitely needs a big phat bass speaker in there somewhere lol
Lovely van Nick. But not as nice as the rotiform wheels on that mk5 outside👌👌👌😍
Doing better than me 🤣 had my new VW 4 weeks now and I've ply lined the walls and doors. Need some 10x5 ply to do a one piece floor now. Not easy to get stuff right now.
You have a better van than him though! You ever seen the resale value on a Ford?
@@grahamlush7140 lol true 😃
Nice one you deserve it but please get mechanical key deadlocks fitted too to your doors as well
Auto as well ? Drove one of these yesterday, lovely drive 👏
Jet rack do a ladder storage system that hangs from the roof and your ladder just clips in
Someone’s doing well 👍👌😂
You've funded this from flexicon endorsements haven't you Nick 😂
Fairplay it's mint 👌
For £155 he could have the number plate K20PEX
There is no balloon payments with PCH leasing. Balloon payments are with PCP.
You can also get HP and CS with a balloon. Not common as far as I’m aware.
Check out Ajax alarm they do a 12v transmitter to link to home alarm and do a PIR with built in camera and siren. If want over kill can get smoke cloak :)
Very Impressive! Nice ‘new to you’ Van. Noticed on your old one the Vinyl has a gmail address, I assume you’ll update that when the new one is Vinyl’d? Looks very professional inside. Maybe spray paint any visible Ply black ?
they are shear nuts mate
It’s a Ford not a Ferrari😂😂
Wish i could afford to pay for a 19 plate transit outright.. joys of an Electrician hey.. money everywere ... 💪🏽💪🏽
Yeah I wouldn't put wd40 on bearings
WD40 will act as a solvent on the bearings and dissolve the grease. Get yourself some proper grease or remove all of the current grease and WD40 and spray everything with Wurth Dry Lube (helps prevent muck building up as it isn’t as sticky as grease).
Grease for bearings, oil for sliding surfaces
Agree. wd40 is almost like a detergent, great for breaking down gunk and freeing things up, but not so good as a long term lubricant.
The heated seats in my Transit are great but never used the aircon, I do live in Cornwall after all.
Excellent job love the front of the van. What engine size is it? Look forward to the finished project.
Finally a recommendation/review and van plan that's actually sold me on whether to finally swap from a VW transporter to a Transit or not. Got to admit I'd ideally want to shift the Sliders to the right so I could still use the internal pipe hatch but looks like I'd have to bolt the sliders to each other or get the wider slider. Looking forward to seeing final layout!
Resale value on a Ford is shit! Don’t do it VW is a far better van, don’t care what anyone thinks.
Adam7890
It’s like this and we have to be honest! Fords are shite, I wouldn’t piss on one if it was on 🔥😂 VW make great well built machines. I too have a T6.1 4 motion, absolutely fantastic. Hats off to the Germans. 👍
Adam7890
You should look at kitting your van out with Sortimo shelving units and accessories. Fantastic products, costs a bit but well worth the money and the just transfer from one Transporter to another when you decide to sell.
@Adam7890 I hope he takes out AA breakdown assist! I'd hate to see him doing a video at the side of the road!!😂😅
@Adam7890 No good!! In our game we need reliability on many platforms! I pity the lad who it was resold to!! Nick Bundy???😂😅
Fit a towbar will be handy for trails and cherry picker
Well in bro! I Just ordered a new custom for myself a couple months ago still waiting on it to be delivered but I can’t wait. I’m looking todo exactly what you have done with the van vaults and raised floor. Did you consider bottsmart van racking at all? I’m thinking of purchasing it after seeing DSS Video a while back but it’s so costly. And if you can do me a favour and get van vault todo a bundy discount that would be ace 🤣.
Not sure what's worse, the wife not turning up on the wedding day or the Amazon delivery. Congrats on the new purchase.
Both in middle and leave the back clear for big stuff man.
£50 quid says you kerb the wheels and shut the rear doors wrong way in 3 months
Looking good, always liked the Customs - I see you have a pro pac - is it the 3 or 4 ? Weighing up which one to get and can't decide between them !
Have you thought about using rivet nuts? Better than self tappers.
Very nice, would love to see a van tour when it's all finished 👍 true question is the numberplate the same as the one is the thumbnail? 😂
Lol Yeah man already in the works to get a van till done just finishing off the last few things
@@NBundyElectrical Coooool 👍
Looks good Nick, just wondering will the ply floor block your access to the panel where you can change the rear light bulbs? (Assuming they're accessed from the inside)
basically spraying WD40 on the bearings and runners you have just stripped off all the lubricant that came with the vaults from the factory.
Doesn't one use grease on bearings? WD40 is too thin to be a lubricant. "Water Dispersal, 40th Attempt"
@@bitTorrenter WD40 is also a degreaser...... :)
You'll regret putting them at the back doors ....I did 😂.
Yep! Always one of those "Oh, a works van. Lets park 50mm off their back bumper" people.
This dude's the James Hetfield of electrical work!
Shear nuts I think they're called
You’ve gotta ‘Out Pimp’ DSS Dan’s van! I’m wondering if there’s any/many companies that can custom vans out like this? If not, there must a huge gap in the market.
"Sortimo" is one company at least. Thomas Nagy has some videos on it.
Just need a Clifford concept 650 alarm now. Pl auto tech is the man for that.
Cheers dude
You not going to put LED Strips in the back for more light? Also a good idea to install small LED Light Bars on the roof outside for those late nights.
Great video, quick question How wide are the two units when together?
You should add carpet to the wood so it look nice and the fury won't show
You need oil for the bearings not a degreaser like wd40. Skateboard bearing oil would be ok. Ps I like your electrical knowledge that you are showing us all , thank you
You should get some grease on the drawer slides not Wd40, WD40 is a solvent and will get rid of all the oil and grease on them already and they will end up worse off
Wd4o is a cleaner not an oil just saying 🤣.
Oil or grease it for a better glide.. 👍
Would a stocked veto pro pac Tec PAC fit in the drawers , perhaps lying down? Recently got a custom too, and am toying with how to set up. Love the idea of 2 drawers. Also how much of a gap will be needed behind van to pull out?
2:17 you gotta have a good length 😆😆😆
9:15 “I’m stuck stepbro . I got my pipe stuck “
Are you worth keeping the sign writing if Adam is going to use it for your business?
add a beer fridge ....you never know lol
Sortimo all the way. No bolting to the floor.
Get a jet-Rack for your ladders Nick, they're great.
Hi nick have just received a new transit custom. Did you upgrade many of the security features on your van? Hace noticed the new customs have changed the front barrel lock on the drivers door.
10:30 what's that alien thing you're using? 😆😆😆
WD-40 water displacer (hence WD) is mainly white spirit with a little mineral oil added plus dispersants. It's the last thing to use as a lubricant. In fact it washes away lubricants from bearings, hinges etc and leaves a very thin film. Spraying it on bearings will wash out the grease and accelerate wear. WD-40 is useless for most jobs since there's always better product to be used in its place. It's rubbish as a penetrating oil too. The only thing it was ever any use for was spraying the distributer caps on old Minis when they were damp, so it did its job as a water displacer and that's about all it was ever good for.
Once you've sheard the nuts you need to cut the bolts flush otherwise you can just lock two nuts on the bolts to loosen them.
you should have used eather Lithium or Copper Grease on the Draw Runners! WD40 Can thin existing Grease
The shear nuts seem pointless, you can't remove the bolts without a tool on the bolt head the other side (with draw removed) anyway.
A good splodge of copper grease on the under body when you've drilled the holes then silicone seal for waterproofing.
Can I make one valid point..
You tradesmen love making van tour & build videos and in this video you touch upon van security, dead locks trackers etc. With respect you are your own worst enemy as your advertising your equipment security and integrity of your vehicle to the world via youtube
Well done Nick, we have just got a new van (68 plate) we were contemplating leasing as you described but we worked it out it would cost us £5,000 in the long term Interested in the deadlocks you were going to get fitted any links .