Thanks for the video. The tank cart proved to be a task. Been there done that before. Seems that sometimes no matter what you do it just takes betting on the connection to get it to move. You did a good job of finally getting it done. Ya!!!! Weather does not help either. Appreciate you hanging in there. Equipment is equipment. Thanks Zach. Take care. Iowa farm boy from years ago.
I really like you trying the strip till machine and putting the fertilizer down right in the row. We have been notill here and are working on being more efficient with our fertilizer and placement.
Your son has the sweetest smile I hope he always stays as sweet as he is. Hope this makes sense, I heard this saying and I think it’s always a good thing to check it out. What we run to might be worse than what we run from. Love your videos at least you have fun with your friends that’s cool, thanks again. Keep Looking up and keep safe.
Zach, that flush face 3/8 inch nipple is the case drain. It has a special check valve in it to prevent the motor case from building too much pressure if it's forgotten or becomes disconnected. I think these large motors can lose 5-8% by the case seals. The tractor should have the female located under the SCV's. Great video Zach as always.
Hi Zach, I said this in one of your other video, your UA-cam channel would make a great T. V. show on a&e. I watch you every night before bed. Your videos are great. Good family content, Love it. We need you on T.V. instead of the garbage that we have today. . This is what kind of a show we need, especially for our children. It is great to see the children in the cabs working. This is showing my children, that this is what it takes to make a difference in our lives. Zach you are a good role model for everyone watching. Would love to meet you one day. Please keep the videos coming. God bless you all from Kosciusko Mississippi. Thank you.
Great content Zach. Watching you and playing Farming Simulator has inspired me to look into a hobby farm or something later in life. Thanks for inspiring and teaching the public!!
We have the same type of gravel where I"m at... I loaded up the driveway with crushed concrete, after driving over it and a few rains it settles nice and hard
get some 3/4 fractured washed stone that would mix in real nice. lay it thicker in the muddier areas. I own a excavation company in Wisconsin thankfully we have plenty of lime stone quarry's in the area. Absolutely love your videos. I have been messing around with some cameras but technology and I dont really get along haha.
Hey Zach. I would not reccomend hitting a tube that slides over another on the sides with the sledge hammer. They both just slightly dent enough so you dont notice and you will not be able to move it... Also if you can, try to pull them off next time when you switch back. Wirebrushing it and spreading some graphite will maybe make it easier going
Sir. I would like see all , the crew family. Your, our dad's, Jim's and any one that works for you. A bison cook out. Keep up the good job. Sgt major usmc retired.
I saaay der , that’s the hardest I’ve seen you work 😂! Love the attitude and great sense of humor Zach. Sure glad it’s winter,would have hated to see Sam in a skirt! 🤣
most equipments you use wrenches to make a adjustment, a John Deere you use a sledge hammer. It's not the tool you always have with you but there is always a first time.
we had the same gravel problem best thing we found is ground up asphalt and concrete from resurfacing roads its like 3 inches and smaller and if the mix is just right after a hot day and a good packing its nearly a paved road ill admit though we dont have nearly the truck traffic you do though
That's what she said... It fits every situation. LOL Man, these things have gotten so complicated and that does not even add the electronic crap. You need a degree in mechanics and electronics to be a farmer, then add in the farming knowledge. Thank you for farming. You are a hero.
I'm an old retired farmer who has taken up watchmaking as a hobby. It's the exact opposite of what you did to that hitch. You had me cringing on my sofa but well done.
Im 72 years old and I've been noticing a lot of people are having knew problems now days. My knees are fine. I have no idea why so many people are having knee problems.
Those Square Bend U-Bolts if you loosen them , make sure there really loosen because they'll bind up on the metal frame like a Wedge and they would move. Been there done that 😂
"Suddenly wish we had shorter hoses. Its not something I'm used to wishing for in my life."
Zach, you crack me up!
Hey, can you tell the actress that plays Mrs. Millennial farmer that we need about 6mins more per video. You guys are the best! Love every minute!
"I had to get mad at it, but I got it." Classic line while working with equipment.
I almost spit milk all over my screen when Zach said "back it up to the shed door".
Great video Zach
"Hit it with your purse!" is going to be my go to phrase now.
It's been a staple here at my shop for a few years now. It always gets a laugh
Grandpa's old saying.....lol
🤣🤣
That’s only after you say “put your palm palms down”.
Got in trouble for saying that to a trainee. lol
It’s always nice to see that it isn’t only my dad and I struggling with equipment. Some days it seems like if it wasn’t bad luck we would have no luck
Thanks for the video. The tank cart proved to be a task. Been there done that before. Seems that sometimes no matter what you do it just takes betting on the connection to get it to move. You did a good job of finally getting it done. Ya!!!! Weather does not help either. Appreciate you hanging in there. Equipment is equipment. Thanks Zach. Take care. Iowa farm boy from years ago.
9:55 "Suddenly wish we had shorter hoses...it's not something i'm used to wishing for in my life" All i can say is...LOL Zach, you are a clever one!
Thks for the video, made me feel better - I thought those things only happened to me. The easy 30 min job turns into a 2 day.
Sam is great. I can see why you hated to see him leave. More Sam!
I really like you trying the strip till machine and putting the fertilizer down right in the row. We have been notill here and are working on being more efficient with our fertilizer and placement.
Your son has the sweetest smile I hope he always stays as sweet as he is. Hope this makes sense, I heard this saying and I think it’s always a good thing to check it out. What we run to might be worse than what we run from. Love your videos at least you have fun with your friends that’s cool, thanks again. Keep Looking up and keep safe.
Zach, that flush face 3/8 inch nipple is the case drain. It has a special check valve in it to prevent the motor case from building too much pressure if it's forgotten or becomes disconnected. I think these large motors can lose 5-8% by the case seals. The tractor should have the female located under the SCV's. Great video Zach as always.
Hi Zach, I said this in one of your other video, your UA-cam channel would make a great T. V. show on a&e. I watch you every night before bed. Your videos are great. Good family content, Love it. We need you on T.V. instead of the garbage that we have today. . This is what kind of a show we need, especially for our children. It is great to see the children in the cabs working. This is showing my children, that this is what it takes to make a difference in our lives. Zach you are a good role model for everyone watching. Would love to meet you one day. Please keep the videos coming. God bless you all from Kosciusko Mississippi. Thank you.
Great content Zach. Watching you and playing Farming Simulator has inspired me to look into a hobby farm or something later in life. Thanks for inspiring and teaching the public!!
I agree with you in that you need to haul in chat from down south or lay down cement or asphalt. The mud is not good for anything.
Great content Zach. I think most of the farmers where I live have a good sense of humor.
Good catch Sam - no levers in geometry!!!
We have the same type of gravel where I"m at... I loaded up the driveway with crushed concrete, after driving over it and a few rains it settles nice and hard
get some 3/4 fractured washed stone that would mix in real nice. lay it thicker in the muddier areas. I own a excavation company in Wisconsin thankfully we have plenty of lime stone quarry's in the area. Absolutely love your videos. I have been messing around with some cameras but technology and I dont really get along haha.
2:36 that smile.... thunderrrrrrr, and that's what she said, are the "what you talking about Willis?" of this channel. Needs to be in every episode.
Thanks for dropping this video. I always enjoy them but today it is keeping me away from “the results.” Be Blessed Always!
Hey Zach. I would not reccomend hitting a tube that slides over another on the sides with the sledge hammer. They both just slightly dent enough so you dont notice and you will not be able to move it... Also if you can, try to pull them off next time when you switch back. Wirebrushing it and spreading some graphite will maybe make it easier going
You need some big taper punches. They are great at aligning holes like that. Used to align steel beams for buildings...
Looks pretty cold there, I just got most of my stuff ready for next year
Love and relax for everyone!!
Zack....good one ☝️.....saying all you have to do is wiggle it back and forth to find the bush 😂.
75 here in Nw Iowa today election day hope your getting some warm weather also.
The hoses joke was hilarious!!😆
Zach was a steel driving man!
Many folks don't realize how much science you use on a daily basis, Zach.
There's always something on the farm that needs a little extra attention. Thanks for the video.
I appreciated your can't I lever joke sam.
Sir. I would like see all , the crew family. Your, our dad's, Jim's and any one that works for you. A bison cook out. Keep up the good job. Sgt major usmc retired.
Ol Sam needs to be a permanent member of the podcast with you, Becky, and RTMPL! Lol
A sleever bar like the ones that iron workers use would work wonders in lining up holes in equipment.
Make the videos longer bud. Love the content. Always entertaining
Good job! Country character rules again!
The amount of ( that’s what she said) opportunity was endless in your newest motion picture! Big future! 😂
7:53 Why didn't you use the WD-40 specialist rust release penetrant spray?
It's ok Zack your just not accustomed to working with larger hose
Like my dad always said brute force and perseverance always wins
I saaay der , that’s the hardest I’ve seen you work 😂! Love the attitude and great sense of humor Zach. Sure glad it’s winter,would have hated to see Sam in a skirt! 🤣
Tillage Sam is an absolute UNIT
Dam I don’t need the comedy club I’m still laughing holy cow stay warm
Gotta love when they send the sales rep instead of the mechanic
most equipments you use wrenches to make a adjustment, a John Deere you use a sledge hammer. It's not the tool you always have with you but there is always a first time.
we had the same gravel problem best thing we found is ground up asphalt and concrete from resurfacing roads its like 3 inches and smaller and if the mix is just right after a hot day and a good packing its nearly a paved road ill admit though we dont have nearly the truck traffic you do though
My uncle from Canada says “if a biggger hammer don’t work, your problems electrical.”
That's what she said... It fits every situation. LOL Man, these things have gotten so complicated and that does not even add the electronic crap. You need a degree in mechanics and electronics to be a farmer, then add in the farming knowledge. Thank you for farming. You are a hero.
Hey Zach I was straining for you when you were hooking the hoses up 😂 Thanks for the video 👍
Your pa is looking good !
I just saw this lol have to watch it if I’m a farmer too!
"Leeveridge" "meezsure"...yep minnasohtah you betcha. lol
Love the video!!!!!!
🧐NOT JUST ME THEN🧐...
Of all the years of getting tools out of the SAME toolbox, we STILL go for the wrong drawer.🙄🤔🙄🤣.
Rich UK 🥰🥰🥰
Dropping that bushing and picking it up again i thought we were gonna get a "hay hay you ok"
I'm constantly surprised how much sledgehammers seem to feature in modern farming... :D
Ive been subed for about a year now, and I have to say, your vids are awesome👍
love your videos keep up the good work!
It's never too early for... "that's what she said"
You must know a different kind of woman than I do as most say "ewww its toooo early"
Thats right
Its never to early. ;3
said the bride (sa brura, norwegian/scandinavian version)
Correction that’s what he said
Sometimes pulling out and sticking back in improves performance.
That’s what she said!!! Sorry I had to!
🤣 this made me laugh!
Fall in Minnesota, you can't forget after you've lived it.
Love the video! Who ever reads this I hope you and your family stay safe and healthy!! God bless all
That what she said jokes.. Never to early !!!!👍👍
your banging and impact racheting gave me visual headache. I feel your pain now..... thanks a alot....
Good job Zach
Zach u were riding up front on the struggle bus in this one bud🤣 I had faith you’d get the better of it eventually! 🇺🇸
I see a few large Spud wrenches would be valuable in your shop!
Farmers ingenuity right there!! Farmers First!!!!
The Farming Comedy Duo!!
Me: Clicking the video to have an awesome 12 minutes.
Video: Ends.
How quickly time passes.... :(
For real :(
I'm an old retired farmer who has taken up watchmaking as a hobby. It's the exact opposite of what you did to that hitch. You had me cringing on my sofa but well done.
Love the videos keep it up 👍
Great videos mate
@3:28 We got you Sam. When all you can do is lever, you cantilever.
Skid steers make a great BFH with a little bit of ingenuity! ;-P
Good luck tonight ........Good luck tomorrow !!
"hit it with your purse"....lolol. Ok that was funny.
Come on state of MN!!
Y’all sure take a hammer to a lot for that new Green machinery.
U- bolts is what was holding it. Just like a tree stand even if loose it'll grip if it gets angled the slightest way.
Nothing like a taappy, tap, tap with a skidsteer for persuasion.
never to early for two things that's what she said jokes and beer
Only i would substitute beer for alcohol in general.
It´s always 4 o´clock somwhere, right?
I was going to say the same thing
theyshisizj beer is “alcohol in general” do you mean liquor?
Hell, even 'its too early' is a thats what she said lol
Safety Always!!
I hope the strip till machine works good, would like to learn more about it, How much fert can you save, i 've heard 40 %
That was surprisingly anticlimactic...
Not gonna say it..
I will!
That's what she said...
“Don’t say it, Don’t say it, Don’t say it, that’s what she said!, dammit!”
Thats what she said!! Just had to add one more! 🤣🤣
Im 72 years old and I've been noticing a lot of people are having knew problems now days. My knees are fine. I have no idea why so many people are having knee problems.
Awesome Video!!
Never a bad time for "that's what she said" jokes! I work in a lab and that's about 90% of the jokes.
Its a good thing corn grows slow.
The Client/Vendor relationship is crucial for the client if they will allow it.
Best UA-cam channel
Those Square Bend U-Bolts if you loosen them , make sure there really loosen because they'll bind up on the metal frame like a Wedge and they would move. Been there done that 😂
OK, I'm now officially a Millennial Farmer 100%er. I've watched every video you've made so far. Now, I wait.
Hey man check out aerokroil for stuck moving parts. Way better than wd-40. Just a suggestion.
Love you vids keep up the good work
Soooo... What's the difference between all these various implements you've been using to try and till the soil?
If the dialogue fits, its never to early for TWSS jokes.
30mm box end wrench:
Craftsman $25
Snap-on $150
John Deere $35 @ 36 months