Schlage Handleset Installation Fixes

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 33

  • @carolynbrehm6390
    @carolynbrehm6390 5 років тому +3

    Worked like a charm to fix my thumb latch that wouldn’t depress. My husband walked in as I was just finishing up and at first he was like “what are you doing?!?!? I hope you didn’t mess that up worse!” And I was like “nope, I fixed it!” And proceeded to show him how it works perfectly now! I love DIY UA-cam videos!

  • @sharylrelic3793
    @sharylrelic3793 8 років тому +3

    Thank you thank you thank you!! I took off the handle set to paint the door and had both problems (opening required lifting inside handle rather than pressing down, and after fixing that, the knob was hard to press to release latch). Even the instructions from the Schlage website weren't helpful. Hours later, I am finally done and it works correctly thanks to the video! I never would have figured these problems out otherwise! Thanks for this extremely helpful video!

  • @Skipperj
    @Skipperj 4 роки тому

    Thanks so much! My model #F58 PLY 609 square drive shaft was 180 deg. off. It has never worked so good! It's 10 yrs old and I've struggled with it for yrs. until now. Great video and customer support!

  • @bretbaack5470
    @bretbaack5470 9 років тому +1

    Awesome! We moved into our house more than 2 years ago and have always struggled with opening the front door since the bolt never quite retracted all the way. We had a handyman look at it with no success.. So I watched the video,took off the doorknob, turned the shaft 180 degrees, and now it works like a charm! Thanks for helping me take care of a huge aggravation!

  • @karenvoeglie5726
    @karenvoeglie5726 7 років тому +1

    Followed the recommendations from the video; both sides of the inner workings needed rotation. Works perfectly and the refurbished door looks great! Just the help we needed, thanks.

  • @karenpage7806
    @karenpage7806 5 років тому +3

    So glad I found your video! I was able to fix the ‘handle turning up’ problem. Thank you!

  • @JonnoPlays
    @JonnoPlays 4 роки тому +1

    Great video, it solved my problem! I couldn't get my lever to turn down, it would only go up. I knew it had to be an installation error but the solution wasn't in the instructions for some reason. I had to Google "door lever turns up but won't turn down" and luckily this video showed up. Maybe a more descriptive title might help grab some extra clicks. I almost didn't click this video but I thought why not I've tried every other video. Thanks for producing this!

    • @JonnoPlays
      @JonnoPlays 4 роки тому

      Update: I took apart my door handle and unfortunately I can't just twist it like shown in the video. It's a Schlage Plymouth Single Cylinder Handleset and Accent Lever, Satin Nickel (F60 V PLY 619 ACC)
      that I got from here: amzn.to/3c3WXRh
      Do you have any idea how I could get this lever to turn down instead of up? I need to flip something around but I can't figure it out. Thanks so much :)

  • @katiearias9772
    @katiearias9772 3 роки тому

    Your video was exactly what I needed to fix the handle set. Thank you for an easy to follow video.

  • @YogiTRiCK
    @YogiTRiCK 3 роки тому

    Finally! Much love me brutha!! Been driving me crazy for years and hard to find the right video. That was too easy, 💕 it!

  • @CraigSelfo
    @CraigSelfo 7 років тому +2

    i can't believe 72,000 views and only 50 likes?
    best instruction vid I've seen all year!
    straight to the fix and good voice.
    i will check out this channel.

  • @laurahuntzinger
    @laurahuntzinger 8 років тому +1

    Thank you! I've been looking for the solution to our hard to open door handle and you've solved it!

  • @MrFlex2tx
    @MrFlex2tx 11 років тому

    thank you! thank you! thank you! I couldn't figure out why I had to lift the handle to open the door, you showing the cam change was exactly what I was looking for. The Schlage website and their installation notes...forget about it!
    Oh - did I say thank you!

  • @valexand8377
    @valexand8377 3 роки тому

    Thank you. I had shaft turned 180 degrees. The handle was turning too when door was opening from outside

  • @grantlandneil
    @grantlandneil 7 років тому

    Thank you for this video. I am trying to repair the Schlage entry handle latch on the front door.

  • @froglock4817
    @froglock4817 8 років тому +1

    Thank you for saving the door handle and the lock

  • @RobKemper
    @RobKemper 8 років тому

    I was about to buy a new door handle. Thanks you!!!

  • @DarrenFix
    @DarrenFix 9 років тому

    Thank you so much! My 3 year old son must have rotated the cam while he was helping me.

  • @fearvo
    @fearvo 7 років тому +2

    Thanks. This helped me too. Well presented video btw.

  • @stephanjuarez4678
    @stephanjuarez4678 3 роки тому

    Need help! When I depress the thumb knob my latch does not retract, just clicks . Lever on the other side of door works fine. Thanks in advance.

  • @btangmd
    @btangmd 4 роки тому

    Thanks for the video! It made me look so smart in front of my wife

  • @randssperl1328
    @randssperl1328 4 роки тому

    My latch would not turn far enough or release, but I could not rotate anything 180 degrees. Turns out I needed to pull the inside latch double "hole" horizontally (away from the latch itself).

  • @paulawhitaker3015
    @paulawhitaker3015 8 років тому

    I have a round knob on the inside and I can only turn the knob left to open the door. They tell me that is how it has to operate. It works fine otherwise, Can I get the knob to open turning either way?

  • @kateroberts2869
    @kateroberts2869 6 років тому

    I am unable to remove my Schlage door lever (similar to the one shown in this video). I removed all of the screws but when I attempt to remove the inside lever, it is stuck. Any ideas on how to get it off if it's stuck?

  • @aartiimpexinc9791
    @aartiimpexinc9791 4 роки тому

    I wanted to change alock which has its handle in averical position to a horizontal position but still cannot figure how to do this

  • @zacfroese4038
    @zacfroese4038 8 років тому +1

    perfect post, thanks.

  • @CharlieBess
    @CharlieBess 9 років тому

    I was doing great until you said 'take the external handle set off'. How do you do that? I didn't see that detail in your video. My inside handle appears to be installed correctly but the outside is not.

  • @felinegoodrescue61
    @felinegoodrescue61 9 місяців тому

    The shaft didn't rotate. (my lock is newer than 11 years old)

  • @h.sarahdobias7692
    @h.sarahdobias7692 9 років тому

    Thank you.. It works...

  • @richardkennedy9912
    @richardkennedy9912 2 роки тому

    Schgale deadbolt and handle set installation

  • @davekleiboeker9275
    @davekleiboeker9275 8 років тому +3

    Bad engineering