Це відео не доступне.
Перепрошуємо.
How to Replace Rear Wheel Hub 2011-2016 Hyundai Elantra
Вставка
- Опубліковано 15 лис 2022
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASH...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a wheel hub on your 2011-2016 Hyundai Elantra. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2013 Hyundai Elantra GLS 1.8L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaYU/1A...
• Phillips Bit in a Ratchet
• Phillips Head Screwdriver 1aau.to/oaYU/1A...
• Pry Bar 1aau.to/oHw/1AX...
• 12mm Wrench 1aau.to/oKg/1AX...
• 14mm Wrench 1aau.to/oKg/1AX...
• 10mm Socket 1aau.to/oaJn/1A...
• 12mm Socket 1aau.to/oaZm/1A...
• 14mm Socket 1aau.to/oaZm/1A...
• 21mm Socket
• Brake Caliper Hanger 1aau.to/obj/1AX...
• Trim Tool Set 1aau.to/oTg/1AX...
• Pliers
• 1/2 Inch Breaker Bar 1aau.to/opq/1AX...
• Socket Driver
• Socket Extensions 1aau.to/oaZm/1A...
• Torque Wrench 1aau.to/oajp/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/own/1AX...
• Copper Anti-Seize
• Gloves 1aau.to/owz/1AX...
• Paper Towels 1aau.to/own/1AX...
• Grinder
• Sledge Hammer
• Wire Brush 1aau.to/opx/1AX...
Subscribe: / @trq
Check out our playlist:
Hyundai Elantra 2011-2016 5th Generation: • Hyundai Elantra 2011-2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video. Just finished installing both rear wheel hubs on my 2011 Elantra GLS. I did not have to remove the ABS/speed sensor.
What is the gasket called for the wheel bearing you said we should replace?
can you not just remove the caliper bracket and take off the whole assembly instead of taking off the caliper by itself?
Thank You.... excellent!!!
Just did this. Everything lined up right and all but once it was back in place the wheel didn't spin by hand. I need to take it apart and look again but what would be the reason for that?
Good but you forgot to put a new backing plate
They tend to get rotted and fall off
Need to know what that gasket is you said may need to be replaced. Don't know what to ask for at the parts place. Some videos come with list of tools and all parts making it easy to follow.
Thank u nice video
Are these considered press in wheel bearings or not?
What are the exact size / name of the 4 12 mm bolts holding the assembly? Mine broke off while taking it off😢
Wish the 2011 Sonata rear hubs are like these. 😑 it's bolted thru the back side and have to remove/loosen lower control arm and shock to get access to the rear 4 bolts
+Edgar Herrera Thanks for the feedback! 1aau.to/m/Shop-TRQ
what is the torque for those 4 hub bolts
The old piece from the old hub was once a dust shield that yoU should have replaced.
I suggest you replace it, as we go ahead and reuse the back of the hub part...