I just put your bushing in my 01 audi TT, my bushings were not even in bad shape, they were totally intact and totally pliable but I changed them regardless being as I was that far apart. Your bushings were a VAST improvement over the OEM bushings, its a much tighter feeling shifter now!
After the bushing falls apart, the cable disconnects from the linkage and hence stays in what ever gear it was in last, then not being able to shift afterwords at all. thank you for the grate info and fix. parts ordered.
Hi. I changed entire shifter and gearlinkage. Good learning etc but still have exactly the same problem; all gears perfect but still no 1st whether engine on or off. Physically it just wont shift almost like a bar is in the way. 2005 audi a3 uk 1.6 petrol. Cheers
dieselgeekdotcom hi cables went on easily and replacement worked when i had it on the floor b4 fitted. Im guessing could be a fork problem. I did wonder if there are any pics of the part that sits/bolts on top of the gearbox...there is a white plastic moving socket which slides and holds the balljoint...could this be worn? Thanks for reply
Thanks for the video .. I am learning all these .. may I ask does all gear box work the same? As underneath the gear box.. they all connected to the 2 cables? I'm always curious how the stuck connected to , or do you have any other videos showing it.. thanks
We have a procedure for accessing the front to back cable end bushing with the box installed in the car. This is far easier than replacing the cable which requires removing the box from the vehicle from below. We shot a nice video demonstrating how to remove the center console without breaking anything.
Hey Jim I ordered both your cable saver and first gear getter bushings and installed them and it seems to have reduced alittle but I still seem to have quite abit of side to side slop and was curious what you think that could be
Thanks for the support that is very cheap, i will make an order. I suppose that is the same model as for the 1.9 TDI 96kw Fabia vrs 2006, all parts look the same, by eyes, are there some hidden differences?
hello ine of my cable got the yellow plastic tip not the metal one is still the same my car is hard to put in 3rd and 4th im going to change the bushing in the transmission cables and this one but my cable got the yellow plastic tip what can i do?
@@dieselgeekdotcom i dont know to tell you the true i got a 2005 vw beetle 1.9 tdi and i took it out and the right side cable the long one it got a plastic tip i was getting everyring ready to buy the kit but i saw that cable and that why im txt you were can i contact you because i need all the bushing
@@dieselgeekdotcom I posted a small clip of the problem I'm having, could you check it out possibly? drive.google.com/file/d/16G0fy_gD4MKQ5J4wKbSbWkarRZmmpuCt/view?usp=sharing
I just put your bushing in my 01 audi TT, my bushings were not even in bad shape, they were totally intact and totally pliable but I changed them regardless being as I was that far apart. Your bushings were a VAST improvement over the OEM bushings, its a much tighter feeling shifter now!
After the bushing falls apart, the cable disconnects from the linkage and hence stays in what ever gear it was in last, then not being able to shift afterwords at all. thank you for the grate info and fix. parts ordered.
This work amazingly well. Awesome product DG!!!!
Hi. I changed entire shifter and gearlinkage. Good learning etc but still have exactly the same problem; all gears perfect but still no 1st whether engine on or off. Physically it just wont shift almost like a bar is in the way. 2005 audi a3 uk 1.6 petrol. Cheers
dieselgeekdotcom hi cables went on easily and replacement worked when i had it on the floor b4 fitted. Im guessing could be a fork problem. I did wonder if there are any pics of the part that sits/bolts on top of the gearbox...there is a white plastic moving socket which slides and holds the balljoint...could this be worn? Thanks for reply
Thanks for the video .. I am learning all these .. may I ask does all gear box work the same? As underneath the gear box.. they all connected to the 2 cables? I'm always curious how the stuck connected to , or do you have any other videos showing it.. thanks
2020 perfect solucion thanks
When you refer to the play and "slop", is that when its in gear I take it? There should be zero movement?
I have a VW Jetta 1.8 Turbo, that was stuck in one gear (5th). Can you tell me which brushing I need so I can order them...
Just bought the deluxe kit and as an after thought will this help the shifter return to center when out of gear?
Could bad bushings cause the trans to randomly be in 1st when the shifter is in R
i have that slop in my 02Q... would this fit for the mk6 02Q transmission? 6spd.
Does this kit works for jetta MK5?
Can you please tell me why my vw golf 5th gear it’s not working I can only drive to 4th gear pleas need help
Works for Jetta 2.0 (2002)?
One note.. you need to take half car apart to access the bottom of that box..
We have a procedure for accessing the front to back cable end bushing with the box installed in the car. This is far easier than replacing the cable which requires removing the box from the vehicle from below. We shot a nice video demonstrating how to remove the center console without breaking anything.
Hey Jim I ordered both your cable saver and first gear getter bushings and installed them and it seems to have reduced alittle but I still seem to have quite abit of side to side slop and was curious what you think that could be
Thanks for the videos, do you send parts to Serbia, First Gear Getter i need, and what are the costs?
ta
Thanks for the support that is very cheap, i will make an order.
I suppose that is the same model as for the 1.9 TDI 96kw Fabia vrs 2006, all parts look the same, by eyes, are there some hidden differences?
Cómo puedo comprar esos bujes para un A4 jetta
hello ine of my cable got the yellow plastic tip not the metal one is still the same my car is hard to put in 3rd and 4th im going to change the bushing in the transmission cables and this one but my cable got the yellow plastic tip what can i do?
@@dieselgeekdotcom i dont know to tell you the true i got a 2005 vw beetle 1.9 tdi and i took it out and the right side cable the long one it got a plastic tip i was getting everyring ready to buy the kit but i saw that cable and that why im txt you were can i contact you because i need all the bushing
My 5 speed 1.8t pops out of gear at low rpms
do make these for mk3 vr6?
thank you, installed them two weeks ago, shifter feels great now!
My car isn’t going into reverse wondering if it’s the cable.
Probably slop somewhere. Here is a video that covers all the problem areas. ua-cam.com/video/7HBE5vycg-4/v-deo.html
What would be the problem if the shifter is not depressing to go into reverse?
@@dieselgeekdotcom thank you 🙏
@@dieselgeekdotcom I posted a small clip of the problem I'm having, could you check it out possibly?
drive.google.com/file/d/16G0fy_gD4MKQ5J4wKbSbWkarRZmmpuCt/view?usp=sharing
@@dieselgeekdotcom thanks for the reply 🙏I'm actually in south africa, or would have sent the stick to u when I replace it.
J'ai besoin pour golf 4 come comment s'appelle par commander sur internet s'il vous plaît.
dieselgeek.com/collections/vw-shifter-bushings/products/cable-saver-replacement-cable-end-bushing-set-for-mk4-golf-gti-jetta-new-beetle-audi-tt
My car will not go into reverse. It’s mk4
Envian a Mexico?
@@dieselgeekdotcom cuanto me sale $ envio a gretna lousiana, 70056?