VP44 Fuel Injection Pump Stealth Cover Install: 98.5-02 Dodge Cummins
Вставка
- Опубліковано 30 чер 2024
- BD stealth cover is the perfect compliment to the VP44 injection pump. The BD stealth cover prevents you from having to splice the wires on your VP44 pump. By splicing the lines, you void the warranty. This is a must have product for VP44 pump owners that are wanting to add power modules such as the Edge Comp.
Watch us install a BD Diesel stealth cover on a VP44 fuel injection pump.
Want a BD Stealth Cover for VP44 Injector Pump? Order one Today! (1050201)
www.thoroughbreddiesel.com/10...
Need more information on a stealth cover installation?
www.dieseladdict.com/vp44-pump...
► Check Out Our Other Install Videos Here: • Installation Videos
► Check Out Our Other Dodge Cummins Videos Here: • Dodge Cummins Videos
★ Saving Diesel Lives! Check out our online store for performance products at: www.thoroughbreddiesel.com/
☎ Give us a call for FREE ADVICE: (866) 737-4966
Please remember to SUBSCRIBE, LIKE, and COMMENT if you like our videos! It really does help us out! Thx for the support.
ua-cam.com/users/thoroughbre...
❤ Join our Diesel Community ❤
● FACEBOOK: / thoroughbreddiesel
● TWITTER: / tbreddiesel
● INSTAGRAM: / tbreddiesel
● PINTEREST: / tbreddiesel
● BLOG: www.dieseladdict.com/
● SNAPCHAT: tbred_diesel
#vp44 #dieselpower #dieselperformance
Chapters
0:00 BD Diesel Stealth Cover
0:31 Where Is The PSG Wire?
1:40 Stealth Cover Parts
2:34 Installation
6:33 Testing
#bddiesel #vp44 #stealthcover #thoroughbreddiesel #dieselpower #diesellife #dieselporn #truckporn - Авто та транспорт
I cant wait to do this to one of your warrantied pumps!
Ha...
We don’t void warranty if the wire is tapped correctly, and it can be done UNCORRECTLY even with a Stealth Cover. By that I mean you can run the set screw too far into the PSG and ruin it, which will in turn void your warranty.
Great Video-Helpful!
This surely will make a nice burnout rig
Nice video going to order one
When you take off the old cover, sometimes a small rectangular o-ring sticks to it, don't forget to put it back on top of the PSG before installing the stealth cover. It will protect the terminals of the timing sensor from water, dust, etc. (top left position of pump if you are looking at the pump with the plug facing towards you).
I would like to simply drill a hole in my Thoroughbred Diesel Pump cover, tap it and reuse it. Why not?
Hi, i gave a nissan frontier and my vp 44 is dead. Can i use this product? Thank u. It is a 2.5l diesel
very good
Thank you! Cheers!
My pump was already wire tapped. What should I do to the wire to protect it after I install this pump cover and tap?
Leave the tap in place to retain continuity, just cut the supply wire to the module at the tap would be my suggestion.
Can this still be installed with the vp44 still on the truck
Yes. No problems installing with the pump on the truck.
Do you have to remove the vp to instal this
yes you do
Guillermo Meza no you don't it open when you take the tps housing off
I have a BMW e46 320d MFY: 2000 (Not common-rail engine) my injection pump not working. can I use this BD cover to fix it? and what purpose that you fix this BD cover? my pump is a Bosch part.
You more than likely have a VP30. This pump cover will do nothing to help you.
+Thoroughbred Diesel All E46 320d's have VP44. Except for common-rail ones.
No, this cover doesn't fix a faulty pump. It just gives you a more convenient and reliable wiring connection for an aftermarket power up chip to connect to.
All this just to get an ignition powered (switched battery positive) point? Am I missing something?
@@douganderson7002 or to keep warranty on the pump
No, it's so you can then interrupt or modify the actuation of the fuel on/off solenoid if you install an aftermarket power up chip. The test with the light or multimeter is just to confirm that the tapping screw made a good connection.
@@jdillon8360 Still think it is an overkill, all you want is a switched battery positive so why all this? Really unnecessary.
@@MrGoogelaar No, it's not so you can have a switched battery positive. It's so you can interfere with the operation of the fuel pump solenoid on the pump, not at the fuse box level, if that's what you're thinking. You either do it this way, or tap into the wire, which doesn't look as neat and often leads to bad connections. I'm guessing you don't own a vehicle with a VP44, you seem not to see why this product is useful.
Thoroughbred diesel says that if you cut that wire your VP warranty is void. There are some taps that work OK, and others that risk cutting the wire when it is installed. Either one can allow moisture in as they are not sealed. Moisture causes corrosion,Corrosion causes electrical failure. I’m not going to void the warranty because I don’t want to spend a little more money and take a little time to install this cover. But that’s just my opinion.
Does using the stealth cover void your warranty on you 24 month vp44 pump
Installing a stealth cover will not void your warranty, but an improper installation of the Stealth Cover will. The Stealth Cover itself will also not save you from a warranty denied situation that our fuel shop deems to be caused by the fueling module. If you would like to give us a call at (866) 737-4966 we would be more than happy to discuss this.