Like you, I watched every video I could find regarding DIY stitching ponies. Yours is the best one and I'm going to use yours as a guide. Thanks for a great job. Well done!
Really well crafted and good looking just as a piece of high end wood working. The one issue with ponies that have large knobs on the side, however, is that your thread loop sometimes gets snagged on the knobs while you're stitching. If they could be made tapered and flush (or slightly inset) knobs to avoid this, it would be perfection.
Add a maganet on each side to hold the needles when adjusting the leather. I like the end results. you did a good job. Good luck with your leather work. Remember, Practice, Practice, Practice,,,,
Nice one Steve! Looks wicked 👊🏻 I’d never heard of a stitching pony until now, you learn something new every day. Great video dude, keep them coming ☺️
Hey Steve, great video, and stitching pony. Have you ever thought about making your videos without music? I think "maker" videos are best when we get to hear the sound of the tools and the making process. Anyways, great job! 👏
@@SteveBellCreates the question is are you? 😂😂 What is your accent? I have a theory about decent humour and region!! I am learning woodwork myself this past 18 months but want to start leather work and some metal work eventually! That’s how I came across your video.
Hi Amanda I’m from the North East of England I’m glad your into woodworking if you have an instagram account let me know and I’ll have a look. And of course I’m into leather 😂
@@SteveBellCreates I knew it! Northerner’s have the best sense of humour (and of course you should be into leather, warms your bones or so I hear 😂). Haven’t set one up for the stuff I make yet but will do soon and upload all my stuff so far. I am wanting to add a UA-cam channel to the 2 sides of my business, if you have any tips? Do you have an Instagram account? Looking forward to more of your videos.
Hi Amanda yes I’m on instagram @stevebellcreates and I have a podcast with me and a guy from Sweden called Three Northern Makers on all good podcast platforms you get a very nice mention in episode 67 due out next Sunday. UA-cam tips be yourself and plan your videos thanks once again for watching btw where are you from ?
@@SteveBellCreates Where did you get those tools you use on the table saw, what you used to cut those 45% angels for the stitching pony and the other tool. If you made it could you make a video on it please.
I have been looking for a good video on making a stitching pony and your design is brilliant. When I saw you fold this closed I actually gasped. I don't suppose there's any chance of a plan for this us there?
Hi and thanks for watching I’m sorry but I don’t have any plans but in the description of my video I mention a channel called learning to make stuff I used his plans as an inspiration for mine there is a link to that video in the description of mine his plans are free to download hope that helps
Great job! But I hate you... I'm jealous. Your tools and shop area are undoubtedly the envy of everyone who watches this video. I couldn't concentrate on what you were doing. I spent the entire video looking at the tools!!! I also picked up on your opening statement... "My wife is getting into leather...". Good one 👍 Thanks for sharing.
Hi there, Can you share the plans? I can send you an email! That’s an awesome stitching pony!!❤ I do leather work as a hubby but would like to make the one you have. Great job! Thanks!
Hi and thanks for watching I’m sorry but I don’t have any plans but in the description of my video I mention a channel called learning to make stuff I used his plans as an inspiration for mine there is a link to that video in the description of mine his plans are free to download hope that helps and good luck with the leather making
Hello, very nice indeed ! Is the large hole angled at 11:54 ? It always amazed by people drilling perfectly straight like that... I would never dare, unless I have at least 50 wood pieces left... maybe I should give it a try, my drill press is wobbling too much now, useless.
Thanks for you nice comments the hole is elongated by hand with the drill so the arm of the pony can open wider since the bolt goes through this hole. I hope I’ve explained that clearly as I’m not sure I have !
@@SteveBellCreates I saw that it was elongated but I thought it was also at a slight angle... I don't understand how the handle can stay perfectly straight to the jaw. Or maybe the nut on the opposite is rotating a little bit...
@@SteveBellCreates Can you give me an advice? I need to fit a M6 threaded insert inside the edge of two pieces of beech plywood glued together ( 15+15mm ). My threaded insert outer diameter is is 10mm, I drilled a 9mm hole. I'm hesitating, my threaded inserts seem cheap ( they have no dent on the outer thread ), beech plywood is hard... and I only have one try... do you think I should enlarge the hole if I don't want the plywood to break or it's ok ? Thanks
@@Stavroguine826 hi have you any scrap plywood to try it in first ? If not can you put a clamp over the two pieces where the insert is going to help avoid breakout also if it’s a tight fit and difficult to screw in add a little bit soap to the threads of your. Insert but just take it nice and slow good luck
A great job done with superior craftsmanship and your efforts are appreciated. For a better instructional ii may be a good idea to rethink the background music. Sure it's a matter of taste but you could do better. Just saying.
Like you, I watched every video I could find regarding DIY stitching ponies. Yours is the best one and I'm going to use yours as a guide. Thanks for a great job. Well done!
Thank you so much I’m glad you liked the design my wife is still using it all the time
Love the design. Great job!!
Oh thanks so much Ryan
Wow! Beautiful work. I’ve seen a lot of these made, but yours earns 1st place by a good margin 👍 Subscription earned.
Thanks so much really glad you liked it and thanks for subscribing
That is a top-notch stitching pony. I'm glad I found this channel, I hope you keep producing these informative videos.
Thanks so much
Thank you for your video, this way is more expensive than buying a pony. ❤
muy buen trabajo muy buen video , simplemente espectacular
Muchas gracias Jose
The best looking pony I've yet to see! Thanks for the video... hands in the way and all............:>)
Thanks so much and I’ll slowly get better making the videos I hope 😂
Outstanding video.
Really like the contrast between the dark wood and light leather.
Thanks so much I’m so glad you enjoyed it
Very clever design. Thank you.
Thank you so much
Beautiful stitching pony. Very inspiring.
Thank you
Great video Steve! The stitching pony came out great. I was just a bum and used my CNC when I made my wife a stitching pony.
Thanks Jason glad you liked it. I really enjoyed making the stitching pony and the video, my wife gets so much use out of it.
Usefull and EASY TO STORE!! Great JOb Steve
Thanks so much for your kind words yeh the wife loves it and used it most days
I love your videos! I had no idea what a stitching pony was... Oh the imaginings.. your videos show great workmanship, thank you!
Thank you so much
Brilliant job Steve, I hope your wife has many happy years using it. 👍
Thanks very much let’s hope she does
Great video! Looking forward to other videos
,
Cheers Ron thanks for watching Glad you enjoyed it
I love how that folds up.
Thanks Andy yeh it folds up nicely
Really well crafted and good looking just as a piece of high end wood working. The one issue with ponies that have large knobs on the side, however, is that your thread loop sometimes gets snagged on the knobs while you're stitching. If they could be made tapered and flush (or slightly inset) knobs to avoid this, it would be perfection.
Thanks Steve for your great comments and my wife is constantly using the stitching pony. I like your ideas about the knobs cheers
I too am into leather oooooooo errrrrrrrrr missus Artisan that is !!!
Add a maganet on each side to hold the needles when adjusting the leather. I like the end results. you did a good job. Good luck with your leather work. Remember, Practice, Practice, Practice,,,,
Thanks for watching the magnets are a great idea 👍
Really well executed! both the build and the video. Great Job Steve.
Thanks so much Dave you are too kind
Looks beautiful thanks for sharing ❤️😎😇
Thank you so much and thanks for watching
This is a fabulous design Hun, thank you for sharing. I may have to build one meself.
Thanks very much for you lovely words
🙏Hello 👍Very good 💯Steve bet your wife loves it👌
Thank you so much and yes she uses it all the time
Very nice. I was surprised that with all the sophisticated equipmment, you did not use a dado and you used a hack saw to cut wood.
Thanks very much but No dado cutters allowed in the uk sorry.
I used the hacksaw to cut the metal pin not the wood
Looks great! 👏👏👏
Thanks very much Dan glad you enjoyed it
love your work ...
Thanks so much Darin
A small modification you might want to do is to put two small magnets on both sides of the clamp so they can hold any needles currently in use.
Thanks great idea
Great Job!
Thanks so much
Excelente poni.👍
Thanks very much
Nice one Steve! Looks wicked 👊🏻 I’d never heard of a stitching pony until now, you learn something new every day. Great video dude, keep them coming ☺️
Thanks so much Sam means a lot coming from a fellow UA-camr!!!
@@SteveBellCreates No worries dude! Ah you and I are UA-cam newbies for sure 😜😂
Hey Steve, great video, and stitching pony. Have you ever thought about making your videos without music? I think "maker" videos are best when we get to hear the sound of the tools and the making process. Anyways, great job! 👏
Thanks glad you enjoyed it
Not going to lie I subscribed just for the leather joke!! 😂😂
Thanks Amanda she’s still into leather btw
@@SteveBellCreates the question is are you? 😂😂 What is your accent? I have a theory about decent humour and region!! I am learning woodwork myself this past 18 months but want to start leather work and some metal work eventually! That’s how I came across your video.
Hi Amanda I’m from the North East of England I’m glad your into woodworking if you have an instagram account let me know and I’ll have a look. And of course I’m into leather 😂
@@SteveBellCreates I knew it! Northerner’s have the best sense of humour (and of course you should be into leather, warms your bones or so I hear 😂). Haven’t set one up for the stuff I make yet but will do soon and upload all my stuff so far. I am wanting to add a UA-cam channel to the 2 sides of my business, if you have any tips? Do you have an Instagram account? Looking forward to more of your videos.
Hi Amanda yes I’m on instagram @stevebellcreates and I have a podcast with me and a guy from Sweden called Three Northern Makers on all good podcast platforms you get a very nice mention in episode 67 due out next Sunday. UA-cam tips be yourself and plan your videos thanks once again for watching btw where are you from ?
Steve, a little tip for filming on the pillar drill, put the camera behind the drill, you get a nice shot and your hands won't get in the way 👍🏻
Your a genius Tim thanks so much
@@SteveBellCreates I learnt the hard way 😂
Hola,podria poner las medidas para guiarnos y poder hacer uno?gracias.
Bravo🎉
Thank you so much
@@SteveBellCreates Where did you get those tools you use on the table saw, what you used to cut those 45% angels for the stitching pony and the other tool. If you made it could you make a video on it please.
Very nice
Thanks so much
I have been looking for a good video on making a stitching pony and your design is brilliant. When I saw you fold this closed I actually gasped. I don't suppose there's any chance of a plan for this us there?
Hi and thanks for watching I’m sorry but I don’t have any plans but in the description of my video I mention a channel called learning to make stuff I used his plans as an inspiration for mine there is a link to that video in the description of mine his plans are free to download hope that helps
Great job! But I hate you... I'm jealous. Your tools and shop area are undoubtedly the envy of everyone who watches this video. I couldn't concentrate on what you were doing. I spent the entire video looking at the tools!!!
I also picked up on your opening statement... "My wife is getting into leather...". Good one 👍
Thanks for sharing.
Thanks for watching Rolf believe me I’ve had many many years with rubbish tools. I could still do with more space it’s a bit cramped in there
❤beutiful
Thanks very much
Looks beautiful and very functional, excellent work. I may have to steal this design for my own pony. Have the joins on the clamp held out okay?
Hi Jonathan please steal away and the joints are really strong my wife uses the pony most days thanks for watching
I was about to spend £60 on one and now I'd rather make one instead thanks mate!
Oh great yes make your own thanks
👍👍👍🔥🔥🔥
Thank you so much
Nice, much beter than mine.
Thanks so much for watching I’m sure yours is great
Hi there,
Can you share the plans? I can send you an email! That’s an awesome stitching pony!!❤ I do leather work as a hubby but would like to make the one you have. Great job!
Thanks!
Hi and thanks for watching I’m sorry but I don’t have any plans but in the description of my video I mention a channel called learning to make stuff I used his plans as an inspiration for mine there is a link to that video in the description of mine his plans are free to download hope that helps and good luck with the leather making
Hello, very nice indeed ! Is the large hole angled at 11:54 ?
It always amazed by people drilling perfectly straight like that... I would never dare, unless I have at least 50 wood pieces left... maybe I should give it a try, my drill press is wobbling too much now, useless.
Thanks for you nice comments the hole is elongated by hand with the drill so the arm of the pony can open wider since the bolt goes through this hole. I hope I’ve explained that clearly as I’m not sure I have !
@@SteveBellCreates I saw that it was elongated but I thought it was also at a slight angle... I don't understand how the handle can stay perfectly straight to the jaw. Or maybe the nut on the opposite is rotating a little bit...
@@Stavroguine826 I’ve just taken a look.and your right ! it is at an angle
@@SteveBellCreates Can you give me an advice? I need to fit a M6 threaded insert inside the edge of two pieces of beech plywood glued together ( 15+15mm ). My threaded insert outer diameter is is 10mm, I drilled a 9mm hole. I'm hesitating, my threaded inserts seem cheap ( they have no dent on the outer thread ), beech plywood is hard... and I only have one try... do you think I should enlarge the hole if I don't want the plywood to break or it's ok ? Thanks
@@Stavroguine826 hi have you any scrap plywood to try it in first ? If not can you put a clamp over the two pieces where the insert is going to help avoid breakout also if it’s a tight fit and difficult to screw in add a little bit soap to the threads of your. Insert but just take it nice and slow good luck
Try Purple Heart.
Thanks next time I will
Steve, it´s soooooooo good 😍🤩 Do you take orders? 😁
Ah Marius your so kind glad you like it
@@SteveBellCreates Would definitely love to have a couple of these in our new workshop!!
@@vidarsirevag8692 your too kind and thanks so much for watching
This is brilliant and beautiful! Your wife is very lucky 🥰 are you selling these by chance?
Thank you so much I’m glad you enjoyed the video and no I’ve no plans to sell the stitching pony’s
@@SteveBellCreates I most certainly would buy one if you change your mind.
please put the riving knife in the saw..... kickback caused me 3 stitches and two fingers in bandages
Yeh I know man I promise I will thanks
A great job done with superior craftsmanship and your efforts are appreciated. For a better instructional ii may be a good idea to rethink the background music. Sure it's a matter of taste but you could do better. Just saying.
Cheers
I’ve job!
Thanks man
pdf pls
Do you sell them?
Hi thanks for watching no I don’t sell them it was a one off for my wife