On Reverse flushing the injectors should be installed upside down with special adapters, so the test liquid flows from the tip cleaning the inside of the injectors (in this step you need to take out the injectors filters). Also non disassembly cleaning means cleanig the inyectors installed in the vehicle, disabling the fuel pump and with the adecuate cleaning agent
@@hybridsolutiondiagnostics7:15 no need to change careers mate!, just a little bit of practice, 😅 also it's recommended to drain the test tubes after the test is finished, not before, so that you can compare each injector volume
@@hybridsolutiondiagnostics I suppose it is the same as a conventional gasoline engine for this process to wash injectors, for example: remove the fuse from the gasoline pump and connect the float to the injector rail, put a pressure of, for example, 40 psi, until it is finish the injector washing fluid. is this correct?
Ты не можешь впросто изучить принцип ультразвуковой кавитации или просто что такое кавитация. И начни с закона Бернулли, сделай мен кавитацию в нужных точках системы . А когда смотрю на стенды с ультразвуком, мне хочется смеяться.
Great video! I was looking for such an informative video for a long time
Hi Jose, it would be great if you could analyse them before cleaning. I would be really curious to see how they spray before cleaning. Thanks.
The problem is that contaminates the fluid inside the machine 😅😅😅
I need this service in my hybrid
How to book a service like this n the cost?
Wonderful job! Best Video on UA-cam!! What is the name of the cleaner you are using? Did a nice job.
On Reverse flushing the injectors should be installed upside down with special adapters, so the test liquid flows from the tip cleaning the inside of the injectors (in this step you need to take out the injectors filters). Also non disassembly cleaning means cleanig the inyectors installed in the vehicle, disabling the fuel pump and with the adecuate cleaning agent
Oh Wao I didn’t know that, I think I’m changing my career of automotive instruction 😒😒🥸🥸🤪🤪
@@hybridsolutiondiagnostics7:15 no need to change careers mate!, just a little bit of practice, 😅 also it's recommended to drain the test tubes after the test is finished, not before, so that you can compare each injector volume
Can you wash the injectors with float in hybrid cars like Nissan Kicks E-power?
Sure 👍 😊
@@hybridsolutiondiagnostics I suppose it is the same as a conventional gasoline engine for this process to wash injectors, for example: remove the fuse from the gasoline pump and connect the float to the injector rail, put a pressure of, for example, 40 psi, until it is finish the injector washing fluid. is this correct?
@@danielanduizacastaneda838 No. It is impossible to wash it properly without removing it from the car.
Where is good place buy prius 2013 hybrid cells
eBay
El Primero/First one!!!
why not just replace them
125€ each and 8 in my aprilia rsv4r !
These are Denso injectors. If they are in the bath, the car will start badly when hot. They leak when the fuel is hot.
Please tell me how does the fuel get hot ?
@@MarkoFQ This has long been known. I do seven injectors regularly, seven days a week. several sets per day.
Ultrasonic bath kills the nozzles and cannot wash the dirt inside.
are you sure, where have you seen this ?.
@@paulinfrance5 Я 15 лет с форсунками работаю и три года каждый день мою 3-5 комплектов FSI.
Ты не можешь впросто изучить принцип ультразвуковой кавитации или просто что такое кавитация. И начни с закона Бернулли, сделай мен кавитацию в нужных точках системы . А когда смотрю на стенды с ультразвуком, мне хочется смеяться.
So what is your point, coming to every injector cleaning video saying your story over and over again ?
@@MarkoFQ Я мою инжектора, а ты их ломаешь. Продолжай если интересно на Китайском стенде.