Full CNC AAP01 worth it? No!
Вставка
- Опубліковано 15 лют 2021
- I knew Action Army was going to pump out CNC parts for the AAP01, however every few of the upgrades actually help the pistol to perform better. Not to mention the ridicules pricing of the upgrades compared to the cost of the pistol.
The AAP01 is good with just a hop up bucking change. If you truly seek peak performance, spend the money elsewhere. - Розваги
The cnc upper is absolutely worth it if you value accuracy and consistency. It helps to remove some of the slop in the action of the gun and i think its your "mods" that are cause some of your wear issues.
what is the tightest barrel that you can put in the black mamba? or in the aap01
6.00 is the tightest I've seen. But a tighter barrel only increases fps, it doesnt really improve accuracy and in some cases it will hurt your accuracy if your barrel volume doesnt match the cylinder/gas volume correctly. I currently have a 6.05 in all of my aap-01s
ok, im thinking about getting a 6.03 or 6.01 mm barrel. And did the barrel you bought come with a hop up already attached?
@@knobling best accuacy i got was with a posidon air cushion 6.05 barrel with a maple leaf autobot bucking and the upgraded hop chamber. I tested about 8 different barrels and 6 different buckings, and with that combination i was getting 2-3 inch 10 shot groups at 100 feet
@@stewartsteele6886 oh wow! thats crazy accurate, how much did the barrel and bucking cost, and where did you buy it?
are you drunk?
Your Honesty Is Awesome
The gun is $99… for what you get along with all the upgraded parts out there, it’s worth it. If you don’t want cheap, don’t be cheap and upgrade it with a purpose. They give you a gun that basically shoots and it’s on you to upgrade. If you don’t want to do that, go buy a prebuilt hi capa. I bought this pistol and put about $300 into it and I bet it’s keeps up with hi capas if not runs better.
At least they are in stock. Unlike some other pistols.
would you recommend for a high speed sub machine gun build
Can you do a video regarding bucking hardness/nozzle length?
AEG nozzles? I have a video regarding air seal and nozzle length is covered in it.
you can buy shock buffers
This is the same upper receiver umbrella Armoury use so can't be that bad
Interesting:)
to be fair, the glock stock doesn't fit on my rs g19 gen4, for exactly the same reason. those lil knubs exist on rs just the same.
Love the content. Keep up the good work
Would you prefer the WE Galaxy or the AAP-01?
I'm not sure if the galaxy has all the after market pieces which make the aap so impressive for ne
I think the AAP is bettter for being cheaper and having more aftermarket support. WE Galaxy is really pretty though
I'm new to Airsoft and I'm wondering how do you make this gun shoot faster
Faster meaning rate of fire or muzzle speed?
@@wyz2285 the rate of fire
Short stroke it
@@tylerbelin8356 wow thank you so much but what type of short stroke does it need to be a certain kind for a very good quality one
@@SpelloTV Right now you can only 3d print one, I have a 3d printer and have installed printed short strokes into mines and they have held up pretty well. Also, be careful of full autoing as the stock rotor will break off. I had it happen to me on the Second Gen, and had to replace it with a Stainless Steel G18c Hammer Set.
Great video, thanks!
I have way too much flex between my outer barrel and upper reciever so I can't get sufficient consistency in my shots. Especially as I run it with stock and foregrip. Therefore I've ordered the black mamba kit.
Anyway, does the inner barrel go about as far out in the threads on the black mamba as with the original plastic barrel? I'm trying to figure out what suppressor to use to swallow the longer inner barrel I will use.
just curious how much weight you saved with drilling the bbu?
Less than 20g I think.
@@wyz2285 And did you see a difference with doing this or is it not worth it?
@@theFunmonkey24 It definitely kicked less and it's a bit more responsive, with the heavy cnc upper it felt a bit closer to a tuned glock. but it is a lot of work.
I’d rather just get a CowCow light weight set up.
@@alanwright782 well this was from a year ago, I have now the cowcow bbu ;)
how many distance this pistol can still be effective?
I know for a fact 250 ft + at 1j.
@@kroppotheclown6288 before I modified mine i got a hit at 70m. Its more accurate now. But i havent had a chance at a longer shot yet. I keep a range finder in my gear so I can get an accurate distance when I take longer shots.
the guns thill realy good but yea i gues the upper is kina bad but over alll its a great gun
I don’t see a drop of lubricants on your carrier group….. or nozzle….
Mine never scratched that much first day lmao has to be some kind of malfunction
That butcher job on the slide is probably what damaged the upper.
Another awesome video. I love how honest you are about the products. Please keep making more content like this. 🤓
bruh its 100 dollars
This pistol is definitely worth 200$
Well done.. finally someone speaking the truth. I have many of the same thoughts & now you have a video the same
First
Oh, more bias whiner
Oh, more fanboy whiner
@@wyz2285 Well if you can explain why an TDC CNC Hop up is not worth the price point consider HiCapa or Glock non TDC hopup cost the same while not being TDC?
Can you explain why is the Black Mamba upper not worth the price when HiCapa or Glock CNC slide cost the same but without sights, rail or muzzle device point?
@@qrw460bhv6 Did I mention the others worth it? I did say the hop up chamber is nice. Plus they certainly do not cost the same, the aap01 is twice the price of most chambers.
Unlike CNC hicapa slides which are either lighter than stock zinc slide/stronger than plastic slides, the black mamba offers no functional advantage. However the plastic thread on the aap01 makes it kind of needed so I do call BS to the lack of alternative to it.
You can say whatever you want I won't waste more time with you. You clearly lack knowledge on gbb pistol.
@@wyz2285 So you use Maple Leaf cast chamber to compare to the CNC AAP01 chamber? I am using Taiwan pricing and AAP01 CNC chamber is about the same as Glock or HiCapa CNC chamber from other brands.
Black Mamba upper do provide a more solid construction compare to the stock polymer and eliminate wobble that can be introduced by heavy muzzle device, double as a extended barrel.
And why would plastic thread be a problem? Unless you heck bend on crossing it they work just as well, if not better since your lock screw can dig in.
It is also funny how you accuse me of knowing nothing yet you cannot bring up any point about not getting the either CNC upgrade aside from cost.