How long will the Dominant Wheel turn before slowing to a stop? It appears to be wonderfully simple. Congratulations on a great build. Very interesting.
Great demo, I learned a lot by watching. the flywheel and the spring are both like capacitors and tuning the spring to be in harmony with the speed of the rotation, beautiful work.
You have done a splendid job on something that is very difficult for many home machinists, that is, getting bearings to line up so smoothly, they seem to flow effortlessly. This is by far the smoothest-running fake engine I have ever seen.
Similar to an electronic RLC circuit. Resonance between the inertial moments of the flywheel and spring produce optimal feedback, like pushing someone on a swing with only a light touch.
Well done. But there is another factor involved. The wheel is oscillating vertically in the gravitational field. It is getting energy out of that field. Think about it. Think about the implications. Now go and look at mooieenergie.nl . and find some of the pages they have deleted because they realised they had revealed too much.
I found this very fascinating ! A few months ago I did a simulation in Working Model with a flywheel and a spring and I was astounded to find that the wheel accelerated, albeit slowly.
Hi Daan, I realize this is a pretty old comment but I was wondering if you have and pictures of the dominant flywheel you made. could you share what items you used to make it?
@@lightswitchromo4393 Hello Lightswitch, yes, that was quite a while ago. As I mentioned it was only a simulation though. Working model's operation is based on real world situations but in my case I can only guess the acceleration came about because of some small error in the program's mathematics.
This is a great little device...I think this has great potential just from studying it. If you can add a bit of drag to the flywheel without it stopping, I would bet you could power a small model dc motor and light up a few LEDs...Just a thought. Like this alot.
Ive been working on the same thing here in the states. Ive found that if i use a massively overpowered spring and gearing i can get a 300 watt generator to run for hours.
What's going on here?! It's a wheel spinning because he spins it, adding rotational energy. It's not an engine, it's a wheel. The spring doesn't add energy, it take some energy to be pushed down and then add some energy when it springs back, but the net energy is always a loss.
The strength in this design is in the fact that it works with the difference in tension of the spring. The flywheel pushes the spring down at is farest (weakest) point and the spring pushes the flywheel back up on the shortest (stronger) point. Works only in one direction. and the power is also very weak. Nice work though! ;-)
Yes quite remarkable, as far as above unity we agree with CHRIS BROESKY bro in a vacuum and less resistance in the barrings, an above unity output might be possible
That's right! Appears at start-up (no braking!) Where you need to slow down, the movement continues. There is a positive boost. Maybe a bottom-fed induction + diode is something.
It would be interesting to see a larger scale model, and se if it also runs when it’s bigger and stronger, that way there could be some kind of potential for a motor that could be strong enough to actually give out some energy, without running out of it too fast itself, sure it might only run for a few minutes, before having to restart it, but long enough to charge a battery a bit, without having to put too much muscle energy into it.
That works cause---Mass has a 1/100 sec. a super mass inertia---it goes in without loose much movement and than the mass on the spring jumpes back with this more Power. Another device is from Henry Bull 1934 -Thanks a lot !!!
I was thinking about it but can't tell why it should work. On the one hand the spring plate is lighter to push down when the leverage is larger but on the other hand, when the crank is pushed upwards while the leverage is shorter and the push stronger, the leverage of the flywheel isn't the same so finally, with material friction involved, we got less than zero net gain...
It is lighter to push down on the farther end, and harder to push down when shorter, but you forgot that it takes energy to decrease the length of the leverage. The lever not only applies an upward force, but also a horizontal force which is opposite to the direction the peg is moving. So the theoretical input force equals the output force if friction was ignored. Perpetual motion machines will never work, even in theoretical conditions, because nothing would be better than just letting a flywheel spin on its own. These machines are just illusions, because they hide the equal and opposite force and make it hard to point out.
Beautiful English engineering at its best well done sir !!! Yes it works !!! hahaha and what I gentleman to share such a wonderful work with the rotten people of this earth hahahah wow .... You can fill the honesty in this man !!! Its got gravity written all over it !! Can it make energy ? yes !!! But for now its inspiration is so simple its been hidden for almost 14 billion years hahaha lol xx
You could sell them with fan blades for summer if you could get that to work. The amount of good that could do for the environment is worth you trying. I'd love to have one and so would any overheating poor person I imagine. Good luck 🍀
This spring would counter act each direction and stop between lobes maybe with larger flywheel and many libked together could keep constand preasures around the 360 degree radius of the wheel
A rare piece of ingenuity. It's got the Victorian era written all over it, with a small dose of Steptoe and Son. I like that. There might be a way to extract energy from this device... given that it does actually defy Newton's first law (there are many devices that have done this). Step 1/ Extend the drive shaft and affix a permanent ring of 12 rotor magnets... Step 2/ Then place a stator wreath of 9 copper coils (configured properly, ala Tesla 3 phase) very close to the rotor, as in face to face, and hey presto! free electricity A.d. infinitum. Get onto it Bailywick1, the race is on. I want to see some results for my two cents worth. Well done old boy! P.S. Every new idea is always met with skepticism... tell 'em to take a hike.
So, very cool, but notice that when he is moving the object, there is a white circle on the table that is very obviously stays within. My guess is there is something under the table of sorts. I think the device would work, but slow down in time from friction. The speeding up...hmm.....reverse spring below? Not sure.
y,ou should patent it , a bit larger and you could make a home generator from this idea its excellent . just put magnets round the flywheel and coils nearby, and make it bigger and you have a winner ....welll done ...very exciting method best wishes from S.e.r.L.
The simple fact of physics is you don’t get nowt for owt ......meaning you do not get something for nothing ....if you watch the video carefully you will notice 1. The flywheel accelerates as soon as the Crank pin touches the spring(indicating that it is powered by a motor) 2. The gentleman rotates the whole divide around an axis indicating that there are wires coming through the table. 3. The gentleman is very careful to position the crank pin as far away from the spring as possible this is to stop it accidentally triggering the motors. 4. The two Aluminium spacers look very much like brushless cd drive motors. And lastly you cannot ignore the laws of physics.
So. Is the purpose of the spring and weight to regulate the speed? Because the flywheel itself is storing the energy provided from the initial push.. seems like the spring would just cause unnecessary friction... unless thre purpose were to regulate the speed... which would come at thecost of that added friction.
"Lets give a spin and away it goes"- well not without quickly getting his left hand to reposition the baseplate, ( at 1min 47secs into the video) whereupon the device picks up speed... Listen carefully and you will hear some whispered advice too shortly after that. What if the 'weight' concealed a strong magnet and there was also a pulsing magnetic system out of view below the surface upon which he is operating the device. My guess is that would account for the manual intervention and repositioning to get the best effect. "What do you think of that" he says. A pity !
Everyone, this is fake. BUT, don't look at these videos as "fake or real?". Instead just enjoy the design of the machine. There are many different ways you could build a "perpetual motor", the fun in these videos comes from the clever design concepts.
I replicated this engine like five times already and couldn't make it work like this one. I think my springs are garbage... Or maybe I forgot to put the electric motor on mine.
Creo haber leido casi todos los comentarios, NO VI NI UNO SOLO de alguien que lo hubiese replicado, sólo opinólogos. Yo trayé de replicarlo, hice cientos de combinaciones, distintas masas, contrapesos, largos, resortes, excéntricas, etc y no hubo caso, NO funcionó. Teóricamente debería funcionar si se usa el resorye y la ubicación apropiados pero en lamprácticano funciona o al menos yo no pude hacerlo.
Ould you attach a very lightweight coil to the spring that moves past a fixed magnet?? If it can be done it might just generate a tiny amount of current. If your intrigued get in touch and we'll talk about it.
What if you put a big ring magnet outside the flywheel and used a coil from a microwave transformer to make some electricity for a little led nightlight?
The crank pin is the commutator, the spring is the brushes, the motor is behind the crank, the weight is full of button batteries, the screw is a potentiometer (speed control). The epoxy is really Fiberglas resin and the table cloth needs washing. Cuz otherwise that won't run. or He's a magician..
+ThomasTheSailor Chubby I think your mostly correct but I don't think the batteries are in the weight unless he is running wires underneath. Could be underneath the base since it does not sit flat or underneath the little sign plate he made. It sure is fooling a lot of people. I may make one just for a laugh.
+valveman12 why does everyone keep thinking that there are batteries or wires involved, when all you need to use is a small stream of air flowing over the top of the flywheel to keep it going. that's what I would use if it were fake. however I believe there is evidence this can work as I have already stated.
Hello, Is there an electromagnet beneath the table that is pulsing the motor to keep it going? Old magicians trick. To prove it isn't there kindly lift the motor off the table about a couple of feet.
Oh hold on, it would have to be the other way round so's the coil doesn't move. That way the current can be fed easily from the coil without causing too much bother
I built a very large version of one of these and hooked a 10000 watt generator to it it works great running my house unfortunately I had no way to charge my phone battery because it was dead so I don't have any video of it but it works great
It makes sence to me BECAUSE it hits the spring at the end and then after center it gets more power Because its farther back the spring flex point the end is like a long pry bar how long it will run i dont know but spins one direction ONLY
Watch at 1:43 the thing will be slow so you can see that when the pin touches the spring, the flywheel gets a boost.. Its a hidden batter and motor in ine of those 2 'motor' casings ;) Never lets the thing rest in a position where the pin is on the spring, or we would see it more clearly. Mags
I see a potential to make energy with this idea ..by using multiple springs and may be an automotive camshaft or similar by using a v8 cam shaft and a small engine flywheel you could possibly use the flywheel and its original alternator to generate electricity in stead of 1 spring you could have 16 times the power out put you could even possibly use rollers on the springs to reduce friction ? This could be a really interesting power source.. I love the pendulum weight idea as a way to fine tune the pressure applied
Nice looking concept, but this ain't real for two reasons (1.) The man in the video would have mass produced this to generate useful energy (2.) The principle of energy conservation, there is no resultant energy created. The crank pin rotates and LOOSES energy as it pushes down the spring, the same amount of energy or less is what it GAINS from the spring as the spring pushes it up.
I think that the acceleration is obtained by gravity that is joined to the plate.the burden created by the rotation of the flywheel pressure plate down so easily that speed fall significantly but not to stop the flywheel So be under the influence of gravity even slightly bounces so that the sheet will try to return to its original state ... BUT already created a momentum of gravity that is joined to the platethus increasing the chances of the flywheel to go free next 75% as momentum will even got to do the same pressure and so in the way of work is gained 0.01% which gives him the chance to continue its work (google translate)
You can power this with a few copper coils inside the bearing and a battery hidden within the system. It's fairly low friction, so you should be able to do it with a very tiny battery. That's assuming he didn't put electricity through the table it's on, since it does appear to be metal and he suspiciously moves it within one exact spot on the table.
we have reconstructed this lovely machine and now just looking for a suitable spring , ours produces about 15 volts when finished with no hidden motors as the doubting thomases say , it is a reasonable and normal engineering principle . we will show it when finished and polished and prove there are no motors whatsoever !
How long will the Dominant Wheel turn before slowing to a stop? It appears to be wonderfully simple. Congratulations on a great build. Very interesting.
great job that's a very interesting motor
Great demo, I learned a lot by watching. the flywheel and the spring are both like capacitors and tuning the spring to be in harmony with the speed of the rotation, beautiful work.
Kenn, this writing was few years a go, but I like your description, you describe beatufly.
You have done a splendid job on something that is very difficult for many home machinists, that is, getting bearings to line up so smoothly, they seem to flow effortlessly. This is by far the smoothest-running fake engine I have ever seen.
Quazie Wabbit
And no hot glue, so lots of bonus points for that, too.
Similar to an electronic RLC circuit. Resonance between the inertial moments of the flywheel and spring produce optimal feedback, like pushing someone on a swing with only a light touch.
Well done. But there is another factor involved. The wheel is oscillating vertically in the gravitational field.
It is getting energy out of that field. Think about it.
Think about the implications.
Now go and look at mooieenergie.nl . and find some of
the pages they have deleted because they realised they
had revealed too much.
@@frank260332 Revealed too much of what?
Magnificent contraption,Bravo Sir!
I found this very fascinating ! A few months ago I did a simulation in Working Model with a flywheel and a spring and I was astounded to find that the wheel accelerated, albeit slowly.
It accelerated due to forces generated by the split tongue. Not widely factored in.
Hi Daan, I realize this is a pretty old comment but I was wondering if you have and pictures of the dominant flywheel you made. could you share what items you used to make it?
@@lightswitchromo4393 Hello Lightswitch, yes, that was quite a while ago. As I mentioned it was only a simulation though. Working model's operation is based on real world situations but in my case I can only guess the acceleration came about because of some small error in the program's mathematics.
Darn....Now I have to go out in my shop and start playing again....Thank You Very Much.....( more please )....Jeff
How long does the battery last?
A few years I think, before metal fatigue could set it… might be weaker in hot weather
robert murry Smith made one . says its real
This is a great little device...I think this has great potential just from studying it. If you can add a bit of drag to the flywheel without it stopping, I would bet you could power a small model dc motor and light up a few LEDs...Just a thought. Like this alot.
how did you build this was it a hobby kit? did you get the design form old books?
Ive been working on the same thing here in the states. Ive found that if i use a massively overpowered spring and gearing i can get a 300 watt generator to run for hours.
brian moreau Would you care to share some information on that and possibly some pics? Id like to build one myself.
+brian moreau when there is a spring involved in the system you can tune the oscillation and get even more energy.
Interesting ! Hmm, normally it should stop due to friction !
It will do
👍🇧🇷🙏🏼RJ
MUITO OBRIGADO PELA OPORTUNIDADE DE APRENDER COM SEUS VÍDEOS.
Very cool for such a simple device!
What's going on here?! It's a wheel spinning because he spins it, adding rotational energy. It's not an engine, it's a wheel.
The spring doesn't add energy, it take some energy to be pushed down and then add some energy when it springs back, but the net energy is always a loss.
The strength in this design is in the fact that it works with the difference in tension of the spring. The flywheel pushes the spring down at is farest (weakest) point and the spring pushes the flywheel back up on the shortest (stronger) point. Works only in one direction. and the power is also very weak. Nice work though! ;-)
Yes quite remarkable, as far as above unity we agree with CHRIS BROESKY bro in a vacuum and less resistance in the barrings, an above unity output might be possible
How long does it rotate before it stops?
look at both connected bearings at the rotating shaft, one is bigger, thats a motor . its a visual illsuion model.
That's right! Appears at start-up (no braking!) Where you need to slow down, the movement continues. There is a positive boost.
Maybe a bottom-fed induction + diode is something.
muy bueno,es algo sensillo de hacer,solo tengo una curiosidad,la energía se pierde en la fricción?? puede funcionar por horas???
It would be interesting to see a larger scale model, and se if it also runs when it’s bigger and stronger, that way there could be some kind of potential for a motor that could be strong enough to actually give out some energy, without running out of it too fast itself, sure it might only run for a few minutes, before having to restart it, but long enough to charge a battery a bit, without having to put too much muscle energy into it.
Obviously advanced alien technology!
😂😂😂 kill me
That works cause---Mass has a 1/100 sec. a super mass inertia---it goes in without loose much movement and than the mass on the spring jumpes back with this more Power. Another device is from Henry Bull 1934 -Thanks a lot !!!
I was thinking about it but can't tell why it should work. On the one hand the spring plate is lighter to push down when the leverage is larger but on the other hand, when the crank is pushed upwards while the leverage is shorter and the push stronger, the leverage of the flywheel isn't the same so finally, with material friction involved, we got less than zero net gain...
It is lighter to push down on the farther end, and harder to push down when shorter, but you forgot that it takes energy to decrease the length of the leverage. The lever not only applies an upward force, but also a horizontal force which is opposite to the direction the peg is moving. So the theoretical input force equals the output force if friction was ignored.
Perpetual motion machines will never work, even in theoretical conditions, because nothing would be better than just letting a flywheel spin on its own. These machines are just illusions, because they hide the equal and opposite force and make it hard to point out.
What is the longest you can make it run?
Beautiful English engineering at its best well done sir !!! Yes it works !!! hahaha and what I gentleman to share such a wonderful work with the rotten people of this earth hahahah wow .... You can fill the honesty in this man !!! Its got gravity written all over it !! Can it make energy ? yes !!! But for now its inspiration is so simple its been hidden for almost 14 billion years hahaha lol xx
@SPRING POWERED MOTOR
Awesome Innovation. Hope its a perpetual machine.
You could sell them with fan blades for summer if you could get that to work. The amount of good that could do for the environment is worth you trying. I'd love to have one and so would any overheating poor person I imagine. Good luck 🍀
i love spring engine work.. i need to test it :D
emmmm
ada pulak kt sini hehe
biasa lah kecil dunia
mu tau ke.. ini aku komen kt youtube.. bukan aku pos kt sini heheh
that is so awesome
very cool idea
This spring would counter act each direction and stop between lobes maybe with larger flywheel and many libked together could keep constand preasures around the 360 degree radius of the wheel
A rare piece of ingenuity. It's got the Victorian era written all over it, with a small dose of Steptoe and Son. I like that.
There might be a way to extract energy from this device... given that it does actually defy Newton's first law (there are many devices that have done this).
Step 1/ Extend the drive shaft and affix a permanent ring of 12 rotor magnets...
Step 2/ Then place a stator wreath of 9 copper coils (configured properly, ala Tesla 3 phase) very close to the rotor, as in face to face, and hey presto! free electricity A.d. infinitum.
Get onto it Bailywick1, the race is on.
I want to see some results for my two cents worth.
Well done old boy!
P.S. Every new idea is always met with skepticism... tell 'em to take a hike.
If there's a sound, there should be an excess energy, right? Also, please, take a look on Milkovic's Two-Stage oscillator... Nice video, thanks!
Nice work I really enjoyed the video. From what did you get the spring from ? Thanks
he said it was from a clock, old type wind up clocks would have some , we did think that feeler gauges could also be used as the spring
I like it... I would so mod this to do other things :)
So, very cool, but notice that when he is moving the object, there is a white circle on the table that is very obviously stays within. My guess is there is something under the table of sorts. I think the device would work, but slow down in time from friction. The speeding up...hmm.....reverse spring below? Not sure.
y,ou should patent it , a bit larger and you could make a home generator from this idea its excellent . just put magnets round the flywheel and coils nearby, and make it bigger and you have a winner ....welll done ...very exciting method best wishes from S.e.r.L.
Very Nice !!!!!
The energy is there. I would closer at the resistive load of weight. :^)
That's awesome.
Indeed it is. Well done to realise it.
It seems like you have to load the spring on the long side so that it pushes off from the short side. Hence, this motor runs in one direction only.
The simple fact of physics is you don’t get nowt for owt ......meaning you do not get something for nothing ....if you watch the video carefully you will notice
1. The flywheel accelerates as soon as the Crank pin touches the spring(indicating that it is powered by a motor)
2. The gentleman rotates the whole divide around an axis indicating that there are wires coming through the table.
3. The gentleman is very careful to position the crank pin as far away from the spring as possible this is to stop it accidentally triggering the motors.
4. The two Aluminium spacers look very much like brushless cd drive motors.
And lastly you cannot ignore the laws of physics.
luckyrookie46 very good
So. Is the purpose of the spring and weight to regulate the speed? Because the flywheel itself is storing the energy provided from the initial push.. seems like the spring would just cause unnecessary friction... unless thre purpose were to regulate the speed... which would come at thecost of that added friction.
"Lets give a spin and away it goes"- well not without quickly getting his left hand to reposition the baseplate, ( at 1min 47secs into the video) whereupon the device picks up speed... Listen carefully and you will hear some whispered advice too shortly after that. What if the 'weight' concealed a strong magnet and there was also a pulsing magnetic system out of view below the surface upon which he is operating the device. My guess is that would account for the manual intervention and repositioning to get the best effect. "What do you think of that" he says. A pity !
what do you mean by spare energy? that is great!!
Fantastic. It's is actually very close to perpetual
Everyone, this is fake.
BUT, don't look at these videos as "fake or real?". Instead just enjoy the design of the machine. There are many different ways you could build a "perpetual motor", the fun in these videos comes from the clever design concepts.
Build one 30 ft. across 45 ft. deep. Ok? Good, then its all settled. How long will it run?
I replicated this engine like five times already and couldn't make it work like this one. I think my springs are garbage...
Or maybe I forgot to put the electric motor on mine.
You are an illusionist....rotor is run with hidden electromagnetic field.
You are great illusionist.
Creo haber leido casi todos los comentarios, NO VI NI UNO SOLO de alguien que lo hubiese replicado, sólo opinólogos. Yo trayé de replicarlo, hice cientos de combinaciones, distintas masas, contrapesos, largos, resortes, excéntricas, etc y no hubo caso, NO funcionó. Teóricamente debería funcionar si se usa el resorye y la ubicación apropiados pero en lamprácticano funciona o al menos yo no pude hacerlo.
Ould you attach a very lightweight coil to the spring that moves past a fixed magnet?? If it can be done it might just generate a tiny amount of current. If your intrigued get in touch and we'll talk about it.
it's soooooooper
fantastic
Дед, не томи! Давай уже покажи, куда запрятал батарейку и моторчик. :) :) :)
Finally found you neighbor! Pizza next week? Beer down the pub sometime soon?
What if you put a big ring magnet outside the flywheel and used a coil from a microwave transformer to make some electricity for a little led nightlight?
What is equation behind this ?
So we make lots of electricity by running it ?
Very good chap
Absolutely awesome and lovely. Got to see this video via Robert TnT. Thankyou for the upload!
The crank pin is the commutator, the spring is the brushes, the motor is behind the crank, the weight is full of button batteries, the screw is a potentiometer (speed control). The epoxy is really Fiberglas resin and the table cloth needs washing. Cuz otherwise that won't run. or He's a magician..
+ThomasTheSailor Chubby I think your mostly correct but I don't think the batteries are in the weight unless he is running wires underneath. Could be underneath the base since it does not sit flat or underneath the little sign plate he made. It sure is fooling a lot of people. I may make one just for a laugh.
+valveman12 why does everyone keep thinking that there are batteries or wires involved, when all you need to use is a small stream of air flowing over the top of the flywheel to keep it going. that's what I would use if it were fake. however I believe there is evidence this can work as I have already stated.
rmendes2 Sure a volume of air may work. But where do you aim it and it may be audible.
Again.NO
Yes, there's equality in force between the big wheel and the smaller wheel, the thin metal and the pin he moved.
Hello, Is there an electromagnet beneath the table that is pulsing the motor to keep it going? Old magicians trick. To prove it isn't there kindly lift the motor off the table about a couple of feet.
Great video! Have you thought of attaching some neodymium magnets to your fly wheel and placing a coil array above it to generate electricity?
Wouldnt this slow it down because you transfer the energy to the coil?
Looks to me like an alternative to a clock escapement if that's what we want?
😅 as if the force of the spring woldnt stop the flyweal😂😂
Please stop the world! I wat to get out 😂😂
The same force that pushes the sprig down is the same force that pushes it up. The two forces are equal. So, it will not rotate.
Exactly. It has a battery 🔋
I would like to see a v 8 model 4 springs on each side angled at 45° with a biger flywheel . Make one sir Getter done please.
Construction video please..
gooood
At 3:39 it significantly gained speed, I really can’t see how this is possible.
Is one of the grey bit around the axle a motor?
Very nice👍
Oh hold on, it would have to be the other way round so's the coil doesn't move. That way the current can be fed easily from the coil without causing too much bother
how can i buy one of these from you assembled?
this would run a whimshurst machine
Minute 3:40 the speed increases by itself...?? mmmm....
I built a very large version of one of these and hooked a 10000 watt generator to it it works great running my house unfortunately I had no way to charge my phone battery because it was dead so I don't have any video of it but it works great
😆
Can i see it please because I'm in syria and here we don't have electricity maybe you can help
You could make a phonograph outta that
If spring runs wheel cant screw refill spring and have extra power
What are the Calculations for this piece?
Could this be used to produce electricity or power for small appliances?
of course! Actually most of the parts are not needed, just keep the battery.
Does it make the flywheel run longer or......
If it doesn't, then what could possibly be the purpose?
Can you sell me some of your junk so I can make one for myself?? Put together a kit for me
It makes sence to me BECAUSE it hits the spring at the end and then after center it gets more power Because its farther back the spring flex point the end is like a long pry bar how long it will run i dont know but spins one direction ONLY
He dont get more power, the energy needed to spring load it cant be less than the energy it will release, this is physics 101. Dont be fooled
Nice
Где батарейку спрятал?
Watch at 1:43 the thing will be slow so you can see that when the pin touches the spring, the flywheel gets a boost.. Its a hidden batter and motor in ine of those 2 'motor' casings ;) Never lets the thing rest in a position where the pin is on the spring, or we would see it more clearly.
Mags
I see a potential to make energy with this idea ..by using multiple springs and may be an automotive camshaft or similar by using a v8 cam shaft and a small engine flywheel you could possibly use the flywheel and its original alternator to generate electricity in stead of 1 spring you could have 16 times the power out put you could even possibly use rollers on the springs to reduce friction ? This could be a really interesting power source.. I love the pendulum weight idea as a way to fine tune the pressure applied
Cam shaft didn't work absolutely!!
It will never create more energy that what was given to flywheel by hand..
smart
Nice looking concept, but this ain't real for two reasons (1.) The man in the video would have mass produced this to generate useful energy (2.) The principle of energy conservation, there is no resultant energy created. The crank pin rotates and LOOSES energy as it pushes down the spring, the same amount of energy or less is what it GAINS from the spring as the spring pushes it up.
you have created a perpetual motion machine. Congratulations
I think that the acceleration is obtained by gravity that is joined to the plate.the burden created by the rotation of the flywheel pressure plate down so easily that speed fall significantly but not to stop the flywheel So be under the influence of gravity even slightly bounces so that the sheet will try to return to its original state ... BUT already created a momentum of gravity that is joined to the platethus increasing the chances of the flywheel to go free next 75% as momentum will even got to do the same pressure and so in the way of work is gained 0.01% which gives him the chance to continue its work (google translate)
You can power this with a few copper coils inside the bearing and a battery hidden within the system. It's fairly low friction, so you should be able to do it with a very tiny battery. That's assuming he didn't put electricity through the table it's on, since it does appear to be metal and he suspiciously moves it within one exact spot on the table.
If he is a fraud he's an idiot because in principle his device will work.
we have reconstructed this lovely machine and now just looking for a suitable spring , ours produces about 15 volts when finished with no hidden motors as the doubting thomases say , it is a reasonable and normal engineering principle . we will show it when finished and polished and prove there are no motors whatsoever !
Please post a video showing your version and how you acquire the 15 volts
Saludos me gustaria comparta su video quisiera hacer uno
I think there is a white cable beneath
Hi, can you hold it in the air ??? Please. When not, why not?
Can you send specifications of the motor ?
the spec for the battery is enough
Wow! Can you attach a small dc motor to that and make a generator to power led's?
how long will keep spinning like that for?
Until he turns the power off.