After watching this a few times, I still don't understand how yall accomplished anything without removal of other stuff. You go from removing the 2 inverter bracket bolts and then next clip "we got it out." Great explanation there guys!!
My 2005 Toyota Prius inverted making a ticking sound when ever push the brake pedal down & when ever I open the door it make a ticking sound . Does anybody know what could be the issue? Also the vehicle won’t go into reverse or drive . My code reader doesn’t detect any issues!! Please help
I did this very job on Monday. Unlike some other people, I received no error codes or warnings. I was driving down the street doing 40 mph, and my car just shut down. I slowed down, rolled into a neighborhood, and waited for the tow truck. I googled while I was waiting the 3 hours and determined it was in fact the AM2 fuse due to the inverter coolant pump going bad. Got the car home that night. Did the job the next day. It was hell, but I got it done.
Same thing just happened to me tonight. I took out the AM2 fuse, replaced it with the spare, the car turned on for less than 10 seconds. I replaced it again but this time with the 30A and was able to drive it a quarter mile before the car shutdown again, and this time the fuse blew hard enough to puff out some smoke/fumes from the burn. Ordered the inverter pump and will get a bunch of replacement fuses just to make sure it's good.
That's wild! I assume the car shuts off for safety reasons and to prevent the inverter from overheating, but it's such a crazy situation to be in. I originally had the tow truck towed to my mechanics. Since I live less than a half a mile away from my mechanic, I walked home and got my other car and drove back to my mechanics. I suppose after sitting so long, the car reset. I was able to start it and drive it back home without issue. And if you didn't know, our car has four different water pumps!
This fixed my prius! Thank you for the video! Very informative. We're not mechanics, and it took us about two hours, but your instructions were awesome!
My 2005 Toyota Prius inverted making a ticking sound when ever push the brake pedal down & when ever I open the door it make a ticking sound . Does anybody know what could be the issue? Also the vehicle won’t go into reverse or drive . My code reader doesn’t detect any issues!! Please help
Thanks guys, this video helped me make quick work of replacing the inverter pump on my wife's 2007 Prius. The original OEM pump lasted an impressive 107,000 miles, so I decided to get another OEM one from my local Toyota dealer at a cost of $171.99 plus tax... OUCH. Would have bought it on Amazon for a little less, but I needed it right away.
Thank you for problem statement (it matched my case) and the unique way to replace the pump, I tried it, but was hard to pull out and work in that limited space. So, I followed another video to remove the headlight assembly. It took me around 4 to 5hrs start to finish. There is easy way to test if the pump is not working, you don’t have wait for triangle Hybrid warning indicator (UA-cam). Also you can reproduce this by pulling out the AM2 fuse. Thanks again, wouldn’t have done this without this video. First time I fixed something major in a car.
I have the same problem red triangle in screen twice so I wait 10 min until the car get cold and I added antifreeze to the radiator so one more time the triangle come again the Mécanique told we have to change the inverter electric water pump I will change it tomorrow I hope that the pump is the right problem, everything will be good smouthly and I don't want to see this triangle no more
Hey fellas, hailing from down under here (Australia). Thanks for the video. I checked a few videos out before following yours mainly because unscrewing and lifting the inverter up to get at the pump is a lot less trouble than removing the front headlight, etc., (that other videos suggest). It was a pretty easy fix, on my own with the help of my neighbour's tools (a ratchet that reaches around corners is helpful). I haven't done any mechanical work for decades, so I'm pretty pleased with myself. Thanks so much! Cheers.
Just replaced the Coolant Flow Control Valve a month ago and now this. Almost looks alike, but is a separate unit. Key to know! You must have the right plyers for the clamps! NOTE! Burp the coolant reservoir with 3/16 tubing to bleed cap 10mm or the red shield from hell will appear as to the temp in the inverter will get hot from air gaps.
All I can say is thank you and everybody reading this should learn how to work on their own car because these car mechanic places all they're doing is Google in it and following the instructions just like you would except for the fact that they won't run off with your money 🔥💵
I think the removal of the headlight gives you much more room to work. It's only a few bolts. About to tackle this soon. More concerned with the bleeding part.
Last week I bought a one-owner 2005 Prius for my daily driving, which I had pre-purchase inspected. All was well. The shop gave me a thumbs up. Then… Literally on the way home from buying the car, while in the middle of nowhere, my car went crazy! Mass warning lights. I had No cell signal and was 20 minutes from the next exit. So I gingerly drove, PRAYED and in 25 minutes was at a Toyota dealership. It was the inverter pump. Cost me $671! What choice did I have? Needless to say I was off to a bumpy start. I’m praying it’s a fluke, lol!! A friend of mine who works on Toyotas is flying in next weekend and will do my front and rear brakes, all fluids, all filters, the water pump, all belts, pretty much everything he can fit into a full Saturday and half a Sunday. It’ll cost me a fraction of what I would pay from a dealer. Basically, I’m all in on this car and hoping I have not made a terrible mistake with this investment. 😎
Sorry to hear; ditto on the warning lights - the inverter pump triggers most of them - really strange it does that. Too bad you didn't have a code reader. You could have determined the fault and then safely continued to drive home, no issue. I did over thirty miles on Hwy and back roads but I knew the fault so knew it was minor (as long as you don't wait days ... .) Replacement is easy and extremely inexpensive ($35 for the unit.)
Great vid. Didn't realize just how easy this unit is to access - should have done this two years ago just to prevent this problem - and yes, my pump is dead. Tested it. Since the car is a 2009 w/300K miles, it was bound to occur any time. Also, I have the Prius touring model so the car does have the self leveling headlights and it is still a breeze to remove the pump. And no, I certainly did not remove the head light - lol. All one has to do is first, removed the coolant lines (and used proper hose clamps for that job; these are extremely inexpensive plastic ones and they work great so really should get them for this job. Don't want to replace a hose!) Then in order to remove the third bolt under the leveling mechanism just use a short, open end 10 mm wrench. Easy to reach, and there is plenty of room to both access it and remove/rotate the bolt. I can honestly say, this is the simplest pump on a Prius to replace as far as access - which there is more than enough.
Drove from San Diego all around Oregon almost 3k miles I went total. I’m an hour away from home after all that and BOOM the danger is popping up and I’m like oh shit not the hybrid battery! Turns out I read a code on the transmission on my ODB and this popped up. Glad it’s an easy job. I had to pay dealership price because I needed the part asap.. $194 jeez. About to hit it right now. I got a 2007 as well as him. Drove 7k miles in 4 months and had no issues besides this.
@Dale steyn I’m pretty sure I turned the car off let it cool down. Then I drove it back home an hour. Made it fine. Then I changed the part out for my girlfriends car and it’s been fine ever since.
Good video and yes it is quick to replace the pump if you have the tools. I had bought the doorman pump and installed on my 07 but pump only lasted 3 months. Signs of failed pump... vsc light comes on and few minutes later triangle of death and when you brake, sound of a bad water pump. Decided to just pay up and get the oem pump from dealership.
Thanks guys! It looks not so hard. I had mine replaced at the dealer last year like a DingDong. $900. So stupid I am. Anywho, doing it myself this time. Much appreciated.
Interesting, when i did my inverter pump it took me 3 hours... i was Door Dashing and was close to my house, so I delivered the food and went to O'Reillys to have them scan to double check and buy the part, then drove home (2 mile drive). I wish I knew about lifting the inverter up... it took me 2-1/2 hours because it was dark and I drained the coolant removed the headlight and loosened the bumper... a rusty bolt fought me on the bumper which took 1/3 of my time... you way looked way easier
Only had my 2006 Prius with 128klms a week in Canada wish I had you two in my neighborhood I have the dreaded triangle hope to deal with it soon thanks for all the great info gary canada
To anyone who wants a easy test to see if there pump is working drive at high speeds with AC on High if the air is inconsistent or comes out hot then your pump is malfunctioning and car is over heating cause it’ll be taking a toll on the inverter I have this p0A93 code happen a couple weeks back turned (07 Prius 135+ miles) car off and it was fine since then It comes back like once a week when im running AC/Heater but im getting the pump fixed next Tuesday its been a pain finding a shop that deals with “Hybrid” issues but im scared to order one off RockAuto im buying the part from Toyota for $150 and the shop is charging $200 for Labor (Instalation, Fluids, and draining…etc) which is a good deal I think lol
AISIN is the OEM maker of that pump. you can find it on rockauto or where ever. Im buying a $35 pump because of free same day shipping and great review, time is money. Later down the line ill buy the OEM asap swap it out when the aftermarket go down. O and one of the symptoms of it going bad is A/C won't blow cold consistently or at all.
This prius 2nd Gen is huge popular in Cambodia , especially in Phnom Penh City. I do have one and it's very liable to ride around town. Actually the price is very expensive in my Country. it's cost 13K.
To trip the triangle for the inverter pump you have to work the electrical system. So driving a lot on battery only will generate more heat and trip it. Unfortunately, I know more about the inverter pump than I would like to. The dealer would not change mine for recall originally and then 4 years later insisted that I change out the good one that I had already replaced. The worst part of it was that it was a defective pump and is out again!!!
Last week I brought my 2008 prius gen 2 with 141k miles (I bought it last year for 7500 usd from an old couple) to the Toyota dealer in The Netherlands. A big red triangle on the dash with the car and exclamation sign on the touchscreen came up. It said there was something wrong with the hybrid package. The dealer did some reading on the car, and they told me the dc converter did not convert well so the risk of getting a short circuit in the hybrid system is pretty high. They told that the dc converter cost without taxes about 3000 USD, with labour cost it will cost around 5000 to 6000 USD in total. However, they said that when you replace the dc converter it is still not problem free. Other problems that are connected to the dc converter or hybrid system might occur. Is this true? Or is this a protocol of the dealer to communicate such things? They offered me to sell the car to them for 2000 USD. Should I keep and fix it elsewhere or sell the car?
That part went from $62 in the video 4 years ago to $150 (was the cheapest I could find online. No local auto parts store had this in stock.). By the time I paid taxes and expedited shipping it was just under $200.
I thought the video was very good but some details needed to be added to make job go smoother. You’ll need a good swivel socket to remove/loosen some of the bolts especially the rear inverter bolt. Rear inverter bolt needs to be loosened about half way to get good inverter clearance. I found after taking bolts out of old pump that because hoses had been on for many years couldn’t get hoses off without putting one bolt in old pump and pulling on hoses to remove. The electrical connector on pump needs to be removed with needle nose plier squeezing on locking part of connector, unable to see d/t wire harness blocking view of locking part of connector. Hose clamp should not be replaced until new pump is positioned so that bolts line up with holes in mounting plate. Job would be less messy and easier if proper hose clamping pliers to prevent fluid loss were gotten before starting job.
Min 8:05 In the background the brake fluid is it supposed to be the light color? We have purchased a 09 Prius and it's the same color I thought I might need a brake fluid / bleed job? But most I see online are the same color. Thank you, great videos. We started our (Prius) journey with a first gen did this same job on it not too complicated. Now in the process of rebuilding the hybrid battery system of this newly acquired 09 second gen.
Nice video, did you unplug the safety plug? How do you know when it needs to be replaced? CEL code or hybrid assistant to see if the electrical motor 1 and 2 temperature under 200F and so?
Mine failed at 110k mi a couple years ago and I replaced it like this with a pump from Amazon for $60 (non OEM), plus the cost of some coolant. You can get similar knock-offs for $30 or less. They are probably crap. That pump just failed after about 20k more miles. I will buy the original Toyota part this time if I can get one. It's like $160, but it's the labor. Most people sure will take an hour to fix it, but add in another how many hours of futzing around, scratching your head, putting on the code reader, calling around for the part, waiting for shipping or driving to the auto parts store, figuring out the clamps etc. I don't know about you but a part that is three times the cost but lasts 5 times as long is a bargain in my book. In 12 years I have not spent a lot of money on parts for a Prius! Also, I will add like others that you need to make sure the coolant is actually circulating through the pump and the lines bled of air.
My 2005 Toyota Prius inverted making a ticking sound when ever push the brake pedal down & when ever I open the door it make a ticking sound . Does anybody know what could be the issue? Also the vehicle won’t go into reverse or drive . My code reader doesn’t detect any issues!! Please help
Elliott, you’ve done it again! You made another awesome Prius video, but with a very special guest this time, with a man who’s got an incredibly outfitted garage! It comes complete with a double, doubled stacked electric wall style oven. Josh is capable of incredible feats of strength from his arms and chest that makes him the human engine hoist.
I just changed my inverter coolant pump on my 2007 prius, it fixed the code warning, but now the check engine light has come back on but this time its saying my Air/Fuel Ratio Sensor Bank 2 Sensor 1. Could this have anything to do with the Inverter Coolant pump, possibly being low quality? Maybe I got coolant where it shouldnt have been like in the electric wires on the plug that goes to the pump?
Elliott Alvis also looking to maybe buy a Snyder 600c... my dad found one near us and said he’ll take me to it tomorrow. It’s red, he took some photos of it and it doesn’t look too bad! Will let you know if I decide to buy.
I had a huge service at dealer and I think this was supposed to be a warranty item for Gen 2. Looking at mine it looks rusted like it’s original. Is Toyota required to do recall work if a bulletin is issued? Thanks
I replaced mine, took a couple of long trips, everything was good and now if I get up to speed quick the inverter and transmission get hot and I get codes POA7A and POA92, any ideas??
Seems like I can always trip mine up with having cruise control on all of a sudden something loses vacuum and then all the errors of course with the constant crazy other pump running
Holy shit dude you're a lifesaver. I watch all of JR's video and and I've seen you in them along with the other guy and now I watch this video when randomly at 231,181 I got the triangle of death and the POA93 that's triangle of death it would not go away. Our inverter is creating no turbulence in the reservoir meaning it's dead no warning , no blown fuse. but with this now I feel confident go on RockAuto by a new one fix it putting the new one in, thank you so much.
Elliott Alvis this is very true. I was changing oil in a friends car last weekend and when I finished I realized Josh would’ve engine swapped the thing by then.
I have the same problem red triangle in screen twice so I wait 10 min until the car get cold and I added antifreeze to the radiator so one more time the triangle come again the Mécanique told we have to change the inverter electric water pump I will change it tomorrow I hope that the pump is the right problem, everything will be good smouthly and I don't want to see this triangle no more
I bought an aftermarket pump but it looks like the pigtail adapter to the factory pump won't fit the connection of the new pump. I have looked up several of the aftermarket pumps and the connection looks the same..any suggestions would be helpful.
these last about 100k miles which isnt horrible but because they're electric they're not as reliable as the belt driven pumps. i've replaced it twice on my 220k mile gen 2
I'm smelling battery acid. It has a new battery pack I was told when the pump starts going out it does not cool the inverter off properly and it will let off a battery acid smell. Enjoyed your video. I've been trying to find some rims for my car would you happen to know the name of yours
Whip Tech it honestly drives great! I was thinking it would feel a little different but it didn’t. It seemed like the car rode a little bit higher off of the ground but that’s about it. The ride quality wasn’t bad and the speedometer is still accurate.
FYI this replacement won’t work for models that have the headlight adjuster. I have a 2008 and spent an hour trying to make it work but this part is too tall. You have to get the one that’s like oem
I have the same adjuster and it is still easy. Just follow their method and then use a short, open end wrench to reach the bolt. Plenty of room to do that. Sorry you had to remove the light.
@@dennisbrown5313 we must not have the same headlight cuz the part they install literally did not fit. The headlight adjuster sticks out too far. I had to buy an oem on and it fit perfect
Yes it is a protection feature. Use a needle nose pliers to remove the connected plug. Then replace the blue 15amp fuse with the spare provided. Then the car will start, you can drive it for about 30 minutes at a time (stopping to allow it to cool down, until you can replace the inverter water pump.
Yes it is a protection feature. Use a needle nose pliers to remove the connected plug. Then replace the AM2 fuse with a blue 15amp fuse with the spare provided. Then the car will start, you can drive it for about 30 minutes at a time (stopping to allow it to cool down, until you can replace the inverter water pump.)
@@dalelittlerood5686 It was an easy fix, did it on side of road, when it happened car died in side of road, no lights nothing, couldn't take keys out, totally stuck, once replaced drive like normal again, just weird how the whole car died, to protect the expensive electronics too be sure, but had to walk 3 miles home at 2AM.
If you you are shopping for a car and want to stay cool, save fuel, avoid idling in parking lots etc .. buy a white car. At 700 watts per square yard, the sun really can load down your drive train just to move more heat somewhere else. It's a losing battle.
Nice video and probably the only one on replacing inverter pump on 2nd gen ( though I am looking for on 3rd gen Prius) , assuming it's almost similar process on 3rd gen Prius. So, do we have to disconnect hybrid battery ( pull the orange safety plug on hybrid battery ) prior to this process ? And will it throw any errors after reconnecting the orange safety plug? And , can this pump be replaced from below instead of lifting the inverter ( thus not disturbing the inverter ) ? I subscribed .Thank you
@@ElliottAlvis Well, my only concern is if we have to disconnect the safety orange plug on Hybrid battery and be surprised with some codes after reconnecting. Other than that , I am pretty much above average DIY guy with some spontaneous ideas that make most of the DIY videos I see would have been much easier with my innovative ideas. I sometimes think I should make such videos that would make many projects much simpler. Anyways, I'll start making videos some day. Thank you
I also have the prius. But i think it’s a shame that you can’t take the badges/letters off from the back of rhe car for a cleaner look. With almost every simple car you can do than this times but with the prius you see holes
Yes i know in the past most cars did this. But the last years people like to remove name badges. And only keep the logo. But not toyota... toyota is great in everything .. but in looks not so much
The Ac will stop hit and miss though I think it depands on the operating temperature wheather it geta disabled or not. This is by observation I am not an expert.
PussyGalore honestly that’s what I thought before I bought mine. They are super easy targets to make fun of, but in practice they are pretty good cars.
After watching this a few times, I still don't understand how yall accomplished anything without removal of other stuff. You go from removing the 2 inverter bracket bolts and then next clip "we got it out." Great explanation there guys!!
You check your success by opening the inverter coolant tank and looking for ample turbulence. That's it.
My 2005 Toyota Prius inverted making a ticking sound when ever push the brake pedal down & when ever I open the door it make a ticking sound . Does anybody know what could be the issue? Also the vehicle won’t go into reverse or drive . My code reader doesn’t detect any issues!! Please help
@@danieldeshommes4167that is not the inverter. Is the brake power module topping up the accumulator pressure for abs system.
I did this very job on Monday.
Unlike some other people, I received no error codes or warnings. I was driving down the street doing 40 mph, and my car just shut down.
I slowed down, rolled into a neighborhood, and waited for the tow truck. I googled while I was waiting the 3 hours and determined it was in fact the AM2 fuse due to the inverter coolant pump going bad.
Got the car home that night. Did the job the next day. It was hell, but I got it done.
Same thing just happened to me tonight. I took out the AM2 fuse, replaced it with the spare, the car turned on for less than 10 seconds. I replaced it again but this time with the 30A and was able to drive it a quarter mile before the car shutdown again, and this time the fuse blew hard enough to puff out some smoke/fumes from the burn. Ordered the inverter pump and will get a bunch of replacement fuses just to make sure it's good.
That's wild! I assume the car shuts off for safety reasons and to prevent the inverter from overheating, but it's such a crazy situation to be in.
I originally had the tow truck towed to my mechanics. Since I live less than a half a mile away from my mechanic, I walked home and got my other car and drove back to my mechanics. I suppose after sitting so long, the car reset. I was able to start it and drive it back home without issue.
And if you didn't know, our car has four different water pumps!
@@JusticeIsALie Also, just take off the headlight to do this job. It makes it so much easier.
This fixed my prius! Thank you for the video! Very informative. We're not mechanics, and it took us about two hours, but your instructions were awesome!
How you get those clamps off? Buy a flow valve next they kind of go at the same time, it's right next to it.
You can also get to it by pulling out the headlight. Gives you a little more space.
My 2005 Toyota Prius inverted making a ticking sound when ever push the brake pedal down & when ever I open the door it make a ticking sound . Does anybody know what could be the issue? Also the vehicle won’t go into reverse or drive . My code reader doesn’t detect any issues!! Please help
Thanks guys, this video helped me make quick work of replacing the inverter pump on my wife's 2007 Prius. The original OEM pump lasted an impressive 107,000 miles, so I decided to get another OEM one from my local Toyota dealer at a cost of $171.99 plus tax... OUCH. Would have bought it on Amazon for a little less, but I needed it right away.
My wife’s 2006 lasted 209k miles, my local dealer even gave me a discount on it 125$ out the door lol
Thank you for problem statement (it matched my case) and the unique way to replace the pump, I tried it, but was hard to pull out and work in that limited space. So, I followed another video to remove the headlight assembly. It took me around 4 to 5hrs start to finish. There is easy way to test if the pump is not working, you don’t have wait for triangle Hybrid warning indicator (UA-cam). Also you can reproduce this by pulling out the AM2 fuse. Thanks again, wouldn’t have done this without this video. First time I fixed something major in a car.
Sheetal Gangakhedkar awesome! Glad I could be of service. Thanks for watching!
I have the same problem red triangle in screen twice so I wait 10 min until the car get cold and I added antifreeze to the radiator so one more time the triangle come again the Mécanique told we have to change the inverter electric water pump I will change it tomorrow I hope that the pump is the right problem, everything will be good smouthly and I don't want to see this triangle no more
Hey fellas, hailing from down under here (Australia). Thanks for the video. I checked a few videos out before following yours mainly because unscrewing and lifting the inverter up to get at the pump is a lot less trouble than removing the front headlight, etc., (that other videos suggest). It was a pretty easy fix, on my own with the help of my neighbour's tools (a ratchet that reaches around corners is helpful). I haven't done any mechanical work for decades, so I'm pretty pleased with myself. Thanks so much! Cheers.
Just replaced the Coolant Flow Control Valve a month ago and now this. Almost looks alike, but is a separate unit. Key to know! You must have the right plyers for the clamps! NOTE! Burp the coolant reservoir with 3/16 tubing to bleed cap 10mm or the red shield from hell will appear as to the temp in the inverter will get hot from air gaps.
All I can say is thank you and everybody reading this should learn how to work on their own car because these car mechanic places all they're doing is Google in it and following the instructions just like you would except for the fact that they won't run off with your money 🔥💵
I think the removal of the headlight gives you much more room to work. It's only a few bolts. About to tackle this soon. More concerned with the bleeding part.
Last week I bought a one-owner 2005 Prius for my daily driving, which I had pre-purchase inspected. All was well. The shop gave me a thumbs up. Then… Literally on the way home from buying the car, while in the middle of nowhere, my car went crazy! Mass warning lights. I had No cell signal and was 20 minutes from the next exit. So I gingerly drove, PRAYED and in 25 minutes was at a Toyota dealership. It was the inverter pump. Cost me $671! What choice did I have? Needless to say I was off to a bumpy start. I’m praying it’s a fluke, lol!! A friend of mine who works on Toyotas is flying in next weekend and will do my front and rear brakes, all fluids, all filters, the water pump, all belts, pretty much everything he can fit into a full Saturday and half a Sunday. It’ll cost me a fraction of what I would pay from a dealer. Basically, I’m all in on this car and hoping I have not made a terrible mistake with this investment. 😎
Sorry to hear; ditto on the warning lights - the inverter pump triggers most of them - really strange it does that. Too bad you didn't have a code reader. You could have determined the fault and then safely continued to drive home, no issue. I did over thirty miles on Hwy and back roads but I knew the fault so knew it was minor (as long as you don't wait days ... .) Replacement is easy and extremely inexpensive ($35 for the unit.)
@@dennisbrown5313 I just paid $150 for that part. That was the cheapest I could find online and not in stock at any local parts stores.
Great vid. Didn't realize just how easy this unit is to access - should have done this two years ago just to prevent this problem - and yes, my pump is dead. Tested it. Since the car is a 2009 w/300K miles, it was bound to occur any time. Also, I have the Prius touring model so the car does have the self leveling headlights and it is still a breeze to remove the pump. And no, I certainly did not remove the head light - lol. All one has to do is first, removed the coolant lines (and used proper hose clamps for that job; these are extremely inexpensive plastic ones and they work great so really should get them for this job. Don't want to replace a hose!) Then in order to remove the third bolt under the leveling mechanism just use a short, open end 10 mm wrench. Easy to reach, and there is plenty of room to both access it and remove/rotate the bolt. I can honestly say, this is the simplest pump on a Prius to replace as far as access - which there is more than enough.
I also have a Prius from 2007. I do all the maintenance myself too because it's simple. And it's a reliable car.
Passion Québec Et découvertes they are fantastic cars aren’t they? Thanks for watching!
@@ElliottAlvis yes, they are fantastic. I subscribed to the channel !
Passion Québec Et découvertes awesome, thanks!
Drove from San Diego all around Oregon almost 3k miles I went total. I’m an hour away from home after all that and BOOM the danger is popping up and I’m like oh shit not the hybrid battery! Turns out I read a code on the transmission on my ODB and this popped up. Glad it’s an easy job. I had to pay dealership price because I needed the part asap.. $194 jeez. About to hit it right now. I got a 2007 as well as him. Drove 7k miles in 4 months and had no issues besides this.
@Dale steyn I’m pretty sure I turned the car off let it cool down. Then I drove it back home an hour. Made it fine. Then I changed the part out for my girlfriends car and it’s been fine ever since.
Good video and yes it is quick to replace the pump if you have the tools.
I had bought the doorman pump and installed on my 07 but pump only lasted 3 months. Signs of failed pump... vsc light comes on and few minutes later triangle of death and when you brake, sound of a bad water pump.
Decided to just pay up and get the oem pump from dealership.
Thanks guys! It looks not so hard. I had mine replaced at the dealer last year like a DingDong.
$900.
So stupid I am.
Anywho, doing it myself this time.
Much appreciated.
I fixed mine for less than $50
Did you guys bleed the air out of the cooling system after you installed the pump? Also did you look in the reservoir to see the turbulence? Thanks
How do you do that😮
Watch out for the high voltage when working on your hybrid.Anything orange can potentially kill you if mishandled.
Thank you for posting; I just got off the phone being quoted $611 from the shop to fix; you will save me this money. Nice work!
Interesting, when i did my inverter pump it took me 3 hours... i was Door Dashing and was close to my house, so I delivered the food and went to O'Reillys to have them scan to double check and buy the part, then drove home (2 mile drive).
I wish I knew about lifting the inverter up... it took me 2-1/2 hours because it was dark and I drained the coolant removed the headlight and loosened the bumper... a rusty bolt fought me on the bumper which took 1/3 of my time... you way looked way easier
Only had my 2006 Prius with 128klms a week in Canada wish I had you two in my neighborhood I have the dreaded triangle hope to deal with it soon thanks for all the great info gary canada
Best of luck Gary. Thanks for watching!
Wow you are the best you did it in very shortime Thanks for your time we always learn something
To anyone who wants a easy test to see if there pump is working drive at high speeds with AC on High if the air is inconsistent or comes out hot then your pump is malfunctioning and car is over heating cause it’ll be taking a toll on the inverter
I have this p0A93 code happen a couple weeks back turned (07 Prius 135+ miles) car off and it was fine since then It comes back like once a week when im running AC/Heater but im getting the pump fixed next Tuesday its been a pain finding a shop that deals with “Hybrid” issues but im scared to order one off RockAuto im buying the part from Toyota for $150 and the shop is charging $200 for Labor (Instalation, Fluids, and draining…etc) which is a good deal I think lol
AISIN is the OEM maker of that pump. you can find it on rockauto or where ever. Im buying a $35 pump because of free same day shipping and great review, time is money. Later down the line ill buy the OEM asap swap it out when the aftermarket go down. O and one of the symptoms of it going bad is A/C won't blow cold consistently or at all.
simpson156 that’s interesting! Thanks for the info!
I confirm that my A/C went out the same time my warning light went on.
@@littlesaffron yes my A/C was not putting out much cold air on the interstate also just before my pump failed.
That Prius looks good in black!
It sure does!
This prius 2nd Gen is huge popular in Cambodia , especially in Phnom Penh City. I do have one and it's very liable to ride around town. Actually the price is very expensive in my Country. it's cost 13K.
Panharoth Chhoeun They are great cars, aren’t they? Thanks for watching!
Nice description. Thank you guys.
To trip the triangle for the inverter pump you have to work the electrical system. So driving a lot on battery only will generate more heat and trip it. Unfortunately, I know more about the inverter pump than I would like to. The dealer would not change mine for recall originally and then 4 years later insisted that I change out the good one that I had already replaced. The worst part of it was that it was a defective pump and is out again!!!
Great video always enjoyed watching Josh . He is the kind of friend everyone wishes they had. I am very pleased Hoovies garage sent me over.
James Graves Josh is a heck of a guy. Thanks for the support. Welcome to the channel!
Beginning my binge watch of your vids...
Will R enjoy the ride 😉
Last week I brought my 2008 prius gen 2 with 141k miles (I bought it last year for 7500 usd from an old couple) to the Toyota dealer in The Netherlands. A big red triangle on the dash with the car and exclamation sign on the touchscreen came up. It said there was something wrong with the hybrid package.
The dealer did some reading on the car, and they told me the dc converter did not convert well so the risk of getting a short circuit in the hybrid system is pretty high.
They told that the dc converter cost without taxes about 3000 USD, with labour cost it will cost around 5000 to 6000 USD in total.
However, they said that when you replace the dc converter it is still not problem free. Other problems that are connected to the dc converter or hybrid system might occur.
Is this true? Or is this a protocol of the dealer to communicate such things?
They offered me to sell the car to them for 2000 USD.
Should I keep and fix it elsewhere or sell the car?
That part went from $62 in the video 4 years ago to $150 (was the cheapest I could find online. No local auto parts store had this in stock.). By the time I paid taxes and expedited shipping it was just under $200.
I thought the video was very good but some details needed to be added to make job go smoother. You’ll need a good swivel socket to remove/loosen some of the bolts especially the rear inverter bolt. Rear inverter bolt needs to be loosened about half way to get good inverter clearance. I found after taking bolts out of old pump that because hoses had been on for many years couldn’t get hoses off without putting one bolt in old pump and pulling on hoses to remove. The electrical connector on pump needs to be removed with needle nose plier squeezing on locking part of connector, unable to see d/t wire harness blocking view of locking part of connector. Hose clamp should not be replaced until new pump is positioned so that bolts line up with holes in mounting plate. Job would be less messy and easier if proper hose clamping pliers to prevent fluid loss were gotten before starting job.
Min 8:05 In the background the brake fluid is it supposed to be the light color? We have purchased a 09 Prius and it's the same color I thought I might need a brake fluid / bleed job? But most I see online are the same color. Thank you, great videos. We started our (Prius) journey with a first gen did this same job on it not too complicated. Now in the process of rebuilding the hybrid battery system of this newly acquired 09 second gen.
Nice video, did you unplug the safety plug? How do you know when it needs to be replaced? CEL code or hybrid assistant to see if the electrical motor 1 and 2 temperature under 200F and so?
Like the zip ties holding channel lock for hose clamp
Mine failed at 110k mi a couple years ago and I replaced it like this with a pump from Amazon for $60 (non OEM), plus the cost of some coolant. You can get similar knock-offs for $30 or less. They are probably crap. That pump just failed after about 20k more miles. I will buy the original Toyota part this time if I can get one. It's like $160, but it's the labor. Most people sure will take an hour to fix it, but add in another how many hours of futzing around, scratching your head, putting on the code reader, calling around for the part, waiting for shipping or driving to the auto parts store, figuring out the clamps etc. I don't know about you but a part that is three times the cost but lasts 5 times as long is a bargain in my book. In 12 years I have not spent a lot of money on parts for a Prius! Also, I will add like others that you need to make sure the coolant is actually circulating through the pump and the lines bled of air.
My 2005 Toyota Prius inverted making a ticking sound when ever push the brake pedal down & when ever I open the door it make a ticking sound . Does anybody know what could be the issue? Also the vehicle won’t go into reverse or drive . My code reader doesn’t detect any issues!! Please help
Elliott, you’ve done it again! You made another awesome Prius video, but with a very special guest this time, with a man who’s got an incredibly outfitted garage! It comes complete with a double, doubled stacked electric wall style oven. Josh is capable of incredible feats of strength from his arms and chest that makes him the human engine hoist.
Josh is quite the guy isn’t he? He’s very skilled, and funny too!
These pumps are higher priced now. I guess its because they actually last compared to the original pump.
I just changed my inverter coolant pump on my 2007 prius, it fixed the code warning, but now the check engine light has come back on but this time its saying my Air/Fuel Ratio Sensor Bank 2 Sensor 1.
Could this have anything to do with the Inverter Coolant pump, possibly being low quality? Maybe I got coolant where it shouldnt have been like in the electric wires on the plug that goes to the pump?
Sweet! Thanks dude! Going to do that on my G1 soon!
Austin Kinser do it! As you can see, it’s pretty straightforward. Lol
Elliott Alvis also looking to maybe buy a Snyder 600c... my dad found one near us and said he’ll take me to it tomorrow. It’s red, he took some photos of it and it doesn’t look too bad! Will let you know if I decide to buy.
Austin Kinser that’s awesome you found one!
I had a huge service at dealer and I think this was supposed to be a warranty item for Gen 2. Looking at mine it looks rusted like it’s original. Is Toyota required to do recall work if a bulletin is issued? Thanks
Going to preventatively replace mine right away on '08 with 248,000 miles. Has never been done.
Dudes didn't show shit.. Didn't Even bleed the system.
Good job
I replaced mine, took a couple of long trips, everything was good and now if I get up to speed quick the inverter and transmission get hot and I get codes POA7A and POA92, any ideas??
Seems like I can always trip mine up with having cruise control on all of a sudden something loses vacuum and then all the errors of course with the constant crazy other pump running
Mustve missed it. What was the symptom that you were trying to force?
Thanks for the video! My moms 05 needs this and Toyota wanted ~$300 in labor. (What a joke)
Guy Thorpe wow! That’s a ripoff! It’s pretty easy to tackle yourself, that’s for sure. Thanks for watching!
Going through the same thing they want $750 for part and labor at a local auto shop
@@christianandersonEXP we got quoted $1000.
I put the stock wheels from my BRZ on my prius too 😄
Track Days it’s a good look isn’t it?
I think ima do this it looks dope
This was helpful, thanks!
Holy shit dude you're a lifesaver. I watch all of JR's video and and I've seen you in them along with the other guy and now I watch this video when randomly at 231,181 I got the triangle of death and the POA93 that's triangle of death it would not go away. Our inverter is creating no turbulence in the reservoir meaning it's dead no warning , no blown fuse. but with this now I feel confident go on RockAuto by a new one fix it putting the new one in, thank you so much.
Heck yeah, that’s awesome man. I’m glad this could be of some assistance!
@@ElliottAlvis If you get the P0A93 code but you see turbulence reservoir does that mean the pump is not the problem?
Love quick and easy fixes!
A.J. W. Josh makes everything look easy lol
Elliott Alvis this is very true. I was changing oil in a friends car last weekend and when I finished I realized Josh would’ve engine swapped the thing by then.
Is thia the same pump that was with a high pitch sound in your car?
Mauricio Mariano unfortunately no, that pump isn’t quite as easy to get to. I’ll make a video on that when I eventually repair it myself.
Interesting… What’s Mauricio speaking about here?
What is wrong if u hear that high pitch noise?
Did yall have to remove the headlight to change the pump out?
I have the same problem red triangle in screen twice so I wait 10 min until the car get cold and I added antifreeze to the radiator so one more time the triangle come again the Mécanique told we have to change the inverter electric water pump I will change it tomorrow I hope that the pump is the right problem, everything will be good smouthly and I don't want to see this triangle no more
It’s a fairly easy fix. Hope it works for you!
I bought an aftermarket pump but it looks like the pigtail adapter to the factory pump won't fit the connection of the new pump. I have looked up several of the aftermarket pumps and the connection looks the same..any suggestions would be helpful.
Sorry to hear that Shane! Unfortunately, I don’t have an answer for you.
What code do u get for the inverter issue?
You know,
I have to replace the drivers side headlight igniter also, it may open the world up to take the headlight loose also.
these last about 100k miles which isnt horrible but because they're electric they're not as reliable as the belt driven pumps. i've replaced it twice on my 220k mile gen 2
astrosecret yeah, but not having many belt driven accessories is part of what makes these cars great. Thanks for watching!
I'm smelling battery acid. It has a new battery pack I was told when the pump starts going out it does not cool the inverter off properly and it will let off a battery acid smell. Enjoyed your video. I've been trying to find some rims for my car would you happen to know the name of yours
The battery fluctuating like that and the poor gas mileage are good indicators that the hybrid battery is failing.
Sure is a nice looking Prius
What do you use on your headlights?!? 🤩
Thanks Guys for a great video.
i replaced mine but my red triangle hasnt went away any thoughts?
Could be the whole battery pack, best to try an app like Dr. Prius.
Beautiful 2nd gen.
172k miles.... how to check if waterpump needs changed before it breaks down?
did you bleed the air out of line?
do you know if prius c water tank also show turbulence
Did you change the coolant?
Hey... Nice vid!
Bruno Thurler Thanks! Welcome to the channel.
Is that pump still performing? I read quite a few negative reviews on Amazon and opted for a cheaper option ($35) with higher reviews.
As far as I know it’s still working! He upgraded to a third gen last year.
How is your pump holding up?
@@alcopower5710 Mines still working after one year.
From testing my car it took 24 km / 16 miles before it would trigger a warning. Was a 30deg C day
great video bro
How does it drive on 17s?
Whip Tech it honestly drives great! I was thinking it would feel a little different but it didn’t. It seemed like the car rode a little bit higher off of the ground but that’s about it. The ride quality wasn’t bad and the speedometer is still accurate.
I’m having the same issues with my 2008 Prius it doesn’t say danger on the screen it’s a problem
FYI this replacement won’t work for models that have the headlight adjuster. I have a 2008 and spent an hour trying to make it work but this part is too tall. You have to get the one that’s like oem
I have the same adjuster and it is still easy. Just follow their method and then use a short, open end wrench to reach the bolt. Plenty of room to do that. Sorry you had to remove the light.
@@dennisbrown5313 we must not have the same headlight cuz the part they install literally did not fit. The headlight adjuster sticks out too far. I had to buy an oem on and it fit perfect
@@ramonrogers8955do you have HID bulbs or halogen bulbs? They are different assemblies.
I love dropping jaws. Most people think a Prius is a dog, I give a lot of people a moment of confusion.
Same! It’s so funny. Thanks for watching!
When my pump failed the car shut down after 4miles total power out I’m hoping to god that was a protection feature so the car didn’t overheat
Yes it is a protection feature. Use a needle nose pliers to remove the connected plug. Then replace the blue 15amp fuse with the spare provided. Then the car will start, you can drive it for about 30 minutes at a time (stopping to allow it to cool down, until you can replace the inverter water pump.
Could you tell us what the sound is like on your next video like this just so we have an idea?
Is this similar for 3rd gen? Thanks!
Check the fluid levels. Always.
So that’s what that circle in the front of the car is for!
If the car keeps blowing the AM2 fuse, will replacing the inverter coolant pump fix it, also smokes from driver's side under hood
Not sure on that one Joshua!
@@ElliottAlvis No worries, it's looking like it shorted. Appreciate the response thanks.
Yes it is a protection feature. Use a needle nose pliers to remove the connected plug. Then replace the AM2 fuse with a blue 15amp fuse with the spare provided. Then the car will start, you can drive it for about 30 minutes at a time (stopping to allow it to cool down, until you can replace the inverter water pump.)
@@dalelittlerood5686 It was an easy fix, did it on side of road, when it happened car died in side of road, no lights nothing, couldn't take keys out, totally stuck, once replaced drive like normal again, just weird how the whole car died, to protect the expensive electronics too be sure, but had to walk 3 miles home at 2AM.
If you you are shopping for a car and want to stay cool, save fuel, avoid idling in parking lots etc .. buy a white car. At 700 watts per square yard, the sun really can load down your drive train just to move more heat somewhere else. It's a losing battle.
Can y’all do this to my Prius? Lol I need this done tooo
haha, its easy man, just go for it! Thanks for watching
Hi from where did you get the part?
Hanan Higgi The part was purchased from Rock Auto. There’s a link in the description of the video.
Nice video and probably the only one on replacing inverter pump on 2nd gen ( though I am looking for on 3rd gen Prius) , assuming it's almost similar process on 3rd gen Prius. So, do we have to disconnect hybrid battery ( pull the orange safety plug on hybrid battery ) prior to this process ? And will it throw any errors after reconnecting the orange safety plug? And , can this pump be replaced from below instead of lifting the inverter ( thus not disturbing the inverter ) ? I subscribed .Thank you
Hello Kumar, I’m not sure how the process differs on the 3rd gen.
@@ElliottAlvis Well, my only concern is if we have to disconnect the safety orange plug on Hybrid battery and be surprised with some codes after reconnecting. Other than that , I am pretty much above average DIY guy with some spontaneous ideas that make most of the DIY videos I see would have been much easier with my innovative ideas. I sometimes think I should make such videos that would make many projects much simpler. Anyways, I'll start making videos some day. Thank you
You definitely want to bleed the system and top off the coolant after replacing the pump.
Not a bad idea at all Paul!
I also have the prius. But i think it’s a shame that you can’t take the badges/letters off from the back of rhe car for a cleaner look. With almost every simple car you can do than this times but with the prius you see holes
JDN Rotterdam I guess Toyota really wanted those badges to stay! Lol
Yes i know in the past most cars did this. But the last years people like to remove name badges. And only keep the logo. But not toyota... toyota is great in everything .. but in looks not so much
MG1 INVERTER TEMP going above 220°F triggers the red tringle of death.
Can pump cause you to lose motor oil or cause ac to stop working?
The Ac will stop hit and miss though I think it depands on the operating temperature wheather it geta disabled or not. This is by observation I am not an expert.
They also don't show how to unclip the electric opponent from the pop
Torque app for Prius
Awesome!
You guys seem to love the thing, but I can't imagine ever buying one.
PussyGalore honestly that’s what I thought before I bought mine. They are super easy targets to make fun of, but in practice they are pretty good cars.
Thanks 🙏
Funny everyone skips in their videos that last screw by the headlight housing. I figured out why