OK, I *absolutely* want to try solving that last one. Seriously, you should call it the "mushroom cube" and pitch it to some companies for mass production.
Very interesting! With the last one, I figured maybe you could/would take the centers of the cuboid (or perhaps the entire layer) and put them on the cylinder, making a sort of capsule shape. Getting it to look clean might require reshaping the pieces though, so I can understand not doing that.
These look so cool, they should be actual products! My favorite is the 3x3/mastermorphix swap. I think that would look cool with a sticker mod applied after the swap is done.
- 0:48 You can get this effect by mixin the pieces from different sizes 3x3x3s like a 56mm one with a 45mm one. 🤔 - 1:56 These almost look like a Fangshi Shuang Ren. 😀 I've been wanting an f/s Ren for a long time. I might have DIY one. - 2:18 Yup, that's the trick, many puzzles are just shape-mods of second- and third-order cubes, or a pyraminx or a megaminx, so if you can just figure out how to look at it, suddenly it becomes easy to solve. 😉👍 Sometimes rotating it isn't enough and you have to actually move some pieces to turn it into a 2×/3×/etc. like with a ghost or cutter cubes. Of course, even if you find the regular puzzle inside the shape-mod, doesn't mean it'll suddenly be trivial, there are some puzzles that aren't even shape-mods at all, but regular ones with different stickers that make it hard, like picture cubes or mirror cubes. But that's the fun of it. - 4:21 I wonder what other names the Cutter Cubes go by, because I can't find them on some sites by that label. 🤔 - I wish somebody could figure out what happened to Nathan Wilson. The last time he posted, he was lamenting being burned out and stressing himself over his 30-in-30 series. We kept telling him not to stress and take as much time as he needs, then he disappeared, and _deleted his whole channel._ 😕
It's funny bc I watched this while eating a - bear with me here - blueberry-banana nut muffin with the nuts sieved out with chopped dark Hershey's kisses with malt cocoa powder, made in the microwave and without milk. Bit of a mix 😂
When I saw your how to solve a rubik's cube for beginners. It only worked when 4 of my corners wasnt right. When it was 2 or 1. It was all scrambled up expect the yellow side.
When i did the 3x3 and 4x4 swap on my cubes it just extended the corner peices instead of making them look smaller. They are smaller but now i have a 3x3 covered in alien antenna
OK, I *absolutely* want to try solving that last one.
Seriously, you should call it the "mushroom cube" and pitch it to some companies for mass production.
No !
I would say a muffin cube
i like to call it a tophat cube
@@AnakarGD wa dat
@@khalebwilliams5029 You don’t know what a top hat is?
@@sketchesforyou8020 sry I tot it was som ting else
The amount of quality in this video!
Your my favorite UA-camr
Ayo 7391!
Im subbed
yoo
@@aaronrattanachaipipat hi
I was gonna say that you don't cut corners, but then I saw the barrel cube.
The 3x3 and mastermorphix mod is crazy
Indeed, bro!
I wonder... does it still morph?
@@bred4ev3r yes it does, only the edges do
Very interesting! With the last one, I figured maybe you could/would take the centers of the cuboid (or perhaps the entire layer) and put them on the cylinder, making a sort of capsule shape. Getting it to look clean might require reshaping the pieces though, so I can understand not doing that.
These look so cool, they should be actual products! My favorite is the 3x3/mastermorphix swap. I think that would look cool with a sticker mod applied after the swap is done.
You should swap the edges of the cutter cube and the fisher cube to get a star shaped 3x3x3
careful, you're gonna give calvin puzzles some ideas 😂
I laughed so hard from the sight of the title n the thumbnail. Didn't even view the video yet I knew the video is going to be hilarious.😂
I liked the part where he thought it would be really cool and wanted to try it out
I watched this 4 times already, it still dosent get boring
- 0:48 You can get this effect by mixin the pieces from different sizes 3x3x3s like a 56mm one with a 45mm one. 🤔
- 1:56 These almost look like a Fangshi Shuang Ren. 😀 I've been wanting an f/s Ren for a long time. I might have DIY one.
- 2:18 Yup, that's the trick, many puzzles are just shape-mods of second- and third-order cubes, or a pyraminx or a megaminx, so if you can just figure out how to look at it, suddenly it becomes easy to solve. 😉👍 Sometimes rotating it isn't enough and you have to actually move some pieces to turn it into a 2×/3×/etc. like with a ghost or cutter cubes. Of course, even if you find the regular puzzle inside the shape-mod, doesn't mean it'll suddenly be trivial, there are some puzzles that aren't even shape-mods at all, but regular ones with different stickers that make it hard, like picture cubes or mirror cubes. But that's the fun of it.
- 4:21 I wonder what other names the Cutter Cubes go by, because I can't find them on some sites by that label. 🤔
- I wish somebody could figure out what happened to Nathan Wilson. The last time he posted, he was lamenting being burned out and stressing himself over his 30-in-30 series. We kept telling him not to stress and take as much time as he needs, then he disappeared, and _deleted his whole channel._ 😕
new name for the 3x3/4x4 corner swap:
INTRODUCING THE NEW "Rubik's 3x3D"
That Small Corner one Looked very Cool!!
very interesting. i liked the 3x3 and mastermorphinx mod
0:42 Rubik's ball
1:33 Black speed cube and Rubik's speedcube
Mix the corners of the paper 3×3 with the corners of the Lego 3×3
I think u should do something about a normal 3x3x3 cube and a normal 3x3x3 pyraminx
I tried mixing a gan11 with a Rubik’s brand.
It didn’t go well
I don't see how it could work, i mean with the rubik's trash, or the gan 11 awesome
Apparently the mechanisms fit together
The 5x5 Barrel + 5x5 could be called the “Barrel Jail”
or Jarrel
nothing like a z3cubing video after a long week
Void Cube with the golf ball painted to be 6 different colors so you can move the ball in the center
Oh no, stop giving ideas, I hope Calvin doesn't watch this video!
You should make a 3x3 where the Centers can move, or use the pieces of a magnetic cube to make a void cube (and yes, it would turn terribly)
My favorite is definitely the barrel in a cube
A while ago I made 6 different variations of a layer swap with a ShengShou wind and a ShengShou Mirror cube. So that's an idea of one to try.
I would love to see a cube in a barrel in a cube in a barrel on the 5x5
You should really sell some of your shape mods or general mods to a speed cube shop!
He uses the cubicle, not scs
@Ken lizarda oh sorry I didn’t see the “a”
1. Rubix Swap 3.4
2. Rubix Swap: Edge
3. Tryaswap
4. Barrelcut
5. Checkmate
6. 5Barrel
7. FlatB
1:30 Hey z3cubing I did the 2nd one but it looked kind of funny 😂
I like the 3x3 with the 4x4 corners
When will you make a 100% Lego 2x2 or all paper 2x2
2x2 is like 100 times harder
5x5 Pillar Cube
9:26 That’s what I call a sandwich cube
*with extra filling
wow, so much effort
wow
10:37 Mushroom Moment
Maybe make the middle layer of an cutter cube and the top and bottem of an fisher cutter cube
perhaps try to fit as many pieces onto the other object's core as possible
It's funny bc I watched this while eating a - bear with me here - blueberry-banana nut muffin with the nuts sieved out with chopped dark Hershey's kisses with malt cocoa powder, made in the microwave and without milk.
Bit of a mix 😂
Z3 cubing, can u take the video about sengso 3x3, 4x4 and 5x5 Rubik's clock?
Well i really like 5x5 barrel in a cube
We need more of this
Mind bending 🤯
We love you Z3!
Rubik's cube 2*2 gan is so cool
you are the frankenstein of cubes
you should put mirror cube pieces on a normal 3x3
Rex cube and FTO! (make it a short pls)
I didn’t understand the morphix cube until you put the 3x3 corners in it
4 gigaminx corner/edge peices in one megaminx corner should be cool
3x4 Corner
Fisher Barrel
Siamicker
5x5 Cubrel
2x4x4 Barrel
3xMorphix
Dude, review the Rubik's build it solve it, it's fun to build
🤯 The amount of awesomeness is off the hook.
Love the first one
imagine a stickered 3x3 with stickerless 4x4 corners lol
U make awsome vids your my favorite so far
If one stays consistent with the first 2 mods, are they wca legal?
No, because the pieces don't all have the same finish, color, texture, etc. I'm sure that breaks at least a few regulations.
@@Z3Cubing But it is consistant around the cube.
@@Z3Cubing Same thing with your gan 11 12. If it were not for the scratch, it would be legal.
This is what hknow store seems to keep doing with their "new" cubes.
11:11 Mushroom cube
I did this with my 2x2 and 3x3 and it looked so funny
Wow so Amazing
These puzzles look crazy 🔥
swap the corners of a 4 by 4 for 2 by 2 corners
Is there actually a mod you can make to cubes that makes you able to swap pieces between the cubes?
When I saw your how to solve a rubik's cube for beginners. It only worked when 4 of my corners wasnt right. When it was 2 or 1. It was all scrambled up expect the yellow side.
solve all of them!
You can turn the fisherman cube without the middle layer on 45 degrees
Fisher*
SUPER WOW
i love yours videos
Can you do more videos like this?
So good
you should check out a new rubiks puzzle that rubik's released its called the rubiks slide
Is this a paper Rubik's cube because it looks better than the one that you said we can make at home
Hello, LegoBoyZ3 :)
The last 1 looks like a mushroom🍄🍄
Is there anywhere where you sell your mods? I feel like you could make a lot of money off of stuff like this…
Unfortunately I don't have the time to make very involved mods anymore, much less sell them.
who else thinks they should make mastermorphix a WCA event?
My main is the peices of the thunderclap 3 m with the mechanism of a qiyi warrior.
the first one looks bulged like the big cubes
Cool
I love these diffrent puzzles when are they for sale?😄
You probably had the weirdest cube collection
3:18 is a dictionary definition of a tumor
The last one is a Rubik’s Beyblade
You should make a 5x5 with the centers of a 5x5 ball
Love your content z3cubing
I'm a fan
When i did the 3x3 and 4x4 swap on my cubes it just extended the corner peices instead of making them look smaller. They are smaller but now i have a 3x3 covered in alien antenna
last one is tophat cube
SICK
Jperm: * laughs in GAN 11 12 *
What about a 3 cube peice swap?
you are an artist
do more piece swap mod's
Hello
nice
so if you got a 3x3 and a fisher cube, could you make a cutter cube and fisher cutter cube
I call this “not the 12x12” (3x3 with 4x4 corners)
I have a Question does the Octagonal Barrel shapeshift ?
6:10 i thought it was a y perm
Fun fact: The Rubiks cube wasn’t made in China, it was actually made in Hungary