The lower front panel comes off is held by clips you can’t access the condenser but you can cut the outline & remove the panel, cleaning the condenser is easy but then you have to refit the panel with tape to seal it. You can go all out & make another flush panel if you’re inclined to.
@@filipullhag I've learned that you can use the service menu to do this. Fill water tank with hot water. Turn on dryer and rotate to Allergy mode. Depress drying target button and rotate knob until p.07 shows on screen. Press start and runs a cleaning programme. You can see the amount of debris in the blue filter in the tank after it's finished running the programme. I think p.03 is the short version.
Thanks for the video guess these things self clean as much as lifetime automatic fluid in cars.... design to work till end of warranty period or thereabouts
Front panel comes off and you can use a blade or knife to cut panel to allow easily cleaning of that area special cover can be fitted to cap off the square 😉
The lower front panel comes off is held by clips you can’t access the condenser but you can cut the outline & remove the panel, cleaning the condenser is easy but then you have to refit the panel with tape to seal it.
You can go all out & make another flush panel if you’re inclined to.
Top info mate👍
Thank you for this! How are you cleaning the condenser the best way?
Part number 646776 - maintenance cover.
@@filipullhag I've learned that you can use the service menu to do this. Fill water tank with hot water. Turn on dryer and rotate to Allergy mode. Depress drying target button and rotate knob until p.07 shows on screen. Press start and runs a cleaning programme. You can see the amount of debris in the blue filter in the tank after it's finished running the programme. I think p.03 is the short version.
Thanks for the video guess these things self clean as much as lifetime automatic fluid in cars.... design to work till end of warranty period or thereabouts
Front panel comes off and you can use a blade or knife to cut panel to allow easily cleaning of that area special cover can be fitted to cap off the square 😉
Where did you find t he cover?
Helpful video. How did you access the vent?
From memory i just pulled the two fluff filters out the way
Thanks! It worked for my series 8 as well. I also descaled the filter with some acedic acid.
Great stuff👍
What about the filter for particulate matter ??
Yep all done
@@fiveminuteman I did not see one in the video. Where was it?
I appreciate the effort but you could put the camera a little away and stable to see through the details :D
Nope as it was a confined space.