How to Replace Radiator Fan Clutch 06-10 Ford Explorer
Вставка
- Опубліковано 12 вер 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/113/b...
In the video, 1A Auto shows how to remove a stuck or rusted radiator fan clutch nut. The video is applicable to the 06, 07, 08, 09, 10 Ford Explorer
This process should be similar on the following vehicles:
2006 Ford Explorer
2007 Ford Explorer
2008 Ford Explorer
2009 Ford Explorer
2010 Ford Explorer
🔧 List of tools used:
• 10mm Socket 1aau.to/owc/1AX...
• 36mm Socket 1aau.to/oz/1AAS...
• 8mm Socket 1aau.to/owc/1AX...
• Ratchet 1aau.to/oCy/1AX...
• Socket Extensions 1aau.to/oAc/1AX...
• Torque Wrench 1aau.to/oqV/1AX...
• 8mm Allen Wrench
• Drain Pan 1aau.to/ods/1AX...
Subscribe: / @1aauto
Check out our playlist:
Ford Explorer 2006-2010 4th Gen: • Ford Explorer 2006-201...
Ford Auto Repair Videos: • Ford Auto Repair Videos
For More Info visit us at 1aau.to/h/PC/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I love how the washer fluid cap is missing on this one like mine 😅 it always comes just falls to sit right below it
Other than dumping the entire radiator on the ground cause I forgot to drain it, this video helped me put bunches!!! Thank you!!!
+Joseph Wolos Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Well now I'm still having issues with the temp gauge rising with the a.c. on. There's so many different things it could be from what I've read Idk what to knock out first
Easy and straightforward instructions, you guys are the best 👍🏼
+GrayFatty Thanks for checking us out. 1aauto.com
How do you remove the fan clutch bolt if stuck and won’t come off
Miami Vice called asking for their music back...
😅😅😅
I replaced my fan clutch and it worked for about a week and now it only works when I start my truck than it won’t come on again after it cools off the first time and the vehicle starts overheating if I’m stopped for a few seconds. Help?
Is there a link to the tools used to remove the fan clutch?
Working on the 2006 fan the 4 bolts can not be seen they are covered
I bought a fan clucht but the sensor has a little line that doesnt let the plug go in ,its actually on the other side, so i Just scrape it and plugged it ,is that ok or not...dont have a picture to show what im talking about
Thanks for the upload!! Question: Do you have to drain the radiator to do this job?
+vjurado11 Thank you for checking us out. You don't necessarily have to drain it, but it is a good idea to do it and refill at the same time to ensure proper function of the system. 1aauto.com
so I replaced the clutch.. fan seems to still be engaged all the time.. does the pcm need time to adjust?
+vjurado11 Thank you for checking us out. No you do not need to drain the radiator to replace the fan clutch! We always recommend you have your vehicle properly diagnosed if you are unable to accurately do so. www.1aauto.com
Victor Jurado
I have not replaced anything yet and have this same issue. My fan will be engaged as soon as I start my vehicle after sitting over night.
I have read that it is a bad PCM sensor sending a false reading of overheating, causing the fan to continually run.
Any thoughts?
So. You list a torque wrench, but forgot to actually use it.