I'm running the dr10 stock chassis I upgraded my shocks balance my wheels changed wheelie bar that helped my car a lot of course I'm still running the same set up but I did change my motor to a 3.0t and a drk esc I'm running 2.4s right now
Get a shock equalizer. Shocks set up equally improve handling. Even more so in a straight line going REALLY fast. How many build their shocks emulsion style? My biggest advantage when it comes to handling that much power and speed
I'm back looking at some of your old stuff dude the knowledge you share is priceless I hope your still putting out good content!! I'll see support your channel as always
thanks bro. working on it. seems like im always waiting on that one more thing for the build. i have been doing a lot of carpet racing lately and enjoying that!!
I use the exotek flat carbon wheelie bar.i also changed it to one wheel and I’m using the noble nb4.starting the new season with the noble.that wheelie bar has taken some hits.I’m running the Losi 22s.my last run last year was 2.800 at 53mph.my esc took a dump.but have a better one this year.it’s fun and thank you for all the info and nice job with your cars to.👍
Dude my first 1/10 is a c6r 3 spd , is powerful as all hell and it twists with the best on road course, I’m stoked to be getting into no prep drag racing 🤯
My DR10 is the most exotic RC vehicle I’ve ever owned. Titanium everywhere. Carbide speed bearings. Lockout slipper clutch. Ground effects package. Front and rear canards. High downforce rear wing. Kashima shocks. Everything but a carbon fiber chassis. I still don’t think I need one. I do well without one. Very well. Much more stable than the carbon cars. You still have to make it to the finish line and way too powerful and light usually doesn’t make it that easily. It even has titanium wheel nuts. I have touring car technology in this one. I go to Australia to get my touring car sh*t…
I like the chevy Silverado I just bought one..not painted yet..😢 looking at chevy Camaro 1987 body...to race probably take your advice and roll with the vette
Cool video man hey I think there's a few things you ought to look into or at least try check out the new monster grip traction compound they sell the whole kit with pre-grip and tire conditioner and then the traction compound it works excellent it softens the rubber nice and supple for reaction tires and check out straight line spoilers I've got a few of them and they work great
What is everyone using for shocks/springs on Outlaw cars? I have a set of Hot Racing shocks (TD90X06) that fit well with my 22S. My problem is finding different weight springs for tuning. Any help would be greatly appreciated. Keep up the great videos. Your channel has taught me more about this end of the hobby than any other!
@@Dorkyand40 I have the same model I know what you mean. You should try building the Polar lights Enterprise refit. 1/350 scale. I have own that kit for 8 years now and it intimadates me still. I do custom lighting effects and the paint that is required for it is really hard to do. Some day I'll start it.
ive debated on ordering a set but ihavent seen many people say they are much better then the reactions. seems like voodoo is still the one to beat..maybe the cyrul tires will be good
@@Dorkyand40 Just sanded mine,.....they are STICKY! Sat them on my desk and it looks like I did a burn out,....( they weren't on the car) I'm trying them sunday. let ya know. ( no foam, ribs cut out)
Chad side note Bro, quick question what do you think I should set my DRK 3.5t can timing at? it's paired up with MMX8s currently (eventually I'm gonna get the Big Boy 4 pole castle motor) but for now, I'm also running timing on the esc. I wasn't sure if the DRK had sweet spot on the end bell for timing ? Thanks Buddy
slipper and 250k in the diff. use your esc or radio to control your launch. start low and find out how much it will take..smooth is fast..build the speed down the line. it will change throughout the day based on the road..your tires and the prep and heat
Hey need help with my maclan drk esc 160,I program esc,it’s n Reverse can’t get it to go forward try to Reverse the program it still goes in reverse try to go Norman is still goes in reverse can someone help me with 160 Dragrace king esc?
Start with a new model in the radio and then calibrate the esc per maclan instructions. If it still is in reverse then change the motor direction in the maclan app and not the radio. You can also swap 2 of the motor poles so desolder 2 of the wires from the motor and swap them and resolder.
I'm running the dr10 stock chassis I upgraded my shocks balance my wheels changed wheelie bar that helped my car a lot of course I'm still running the same set up but I did change my motor to a 3.0t and a drk esc I'm running 2.4s right now
You’re on the right track. That was nearly my setup most of last year.
@@Dorkyand40 if u where to c my car on paper it shouldn't make a straight pass but it works I did finally go to a slipper eliminator
Get a shock equalizer. Shocks set up equally improve handling. Even more so in a straight line going REALLY fast. How many build their shocks emulsion style? My biggest advantage when it comes to handling that much power and speed
I'm back looking at some of your old stuff dude the knowledge you share is priceless I hope your still putting out good content!! I'll see support your channel as always
thanks bro. working on it. seems like im always waiting on that one more thing for the build. i have been doing a lot of carpet racing lately and enjoying that!!
@@Dorkyand40 super awesome!!
I use the exotek flat carbon wheelie bar.i also changed it to one wheel and I’m using the noble nb4.starting the new season with the noble.that wheelie bar has taken some hits.I’m running the Losi 22s.my last run last year was 2.800 at 53mph.my esc took a dump.but have a better one this year.it’s fun and thank you for all the info and nice job with your cars to.👍
thanks ghost..keep it up. let me know how the noble works out for you if you end up using it heavily for radio tuning
@@Dorkyand40 That what I'm doing
Great video. I'm just starting and this is a ton of help.
Dude my first 1/10 is a c6r 3 spd , is powerful as all hell and it twists with the best on road course, I’m stoked to be getting into no prep drag racing 🤯
Ya me too! I don't play the rtr game I just build them
My DR10 is the most exotic RC vehicle I’ve ever owned. Titanium everywhere. Carbide speed bearings. Lockout slipper clutch. Ground effects package. Front and rear canards. High downforce rear wing. Kashima shocks. Everything but a carbon fiber chassis. I still don’t think I need one. I do well without one. Very well. Much more stable than the carbon cars. You still have to make it to the finish line and way too powerful and light usually doesn’t make it that easily. It even has titanium wheel nuts. I have touring car technology in this one. I go to Australia to get my touring car sh*t…
I like the chevy Silverado I just bought one..not painted yet..😢 looking at chevy Camaro 1987 body...to race probably take your advice and roll with the vette
nice man..they are cool
Cool video man hey I think there's a few things you ought to look into or at least try check out the new monster grip traction compound they sell the whole kit with pre-grip and tire conditioner and then the traction compound it works excellent it softens the rubber nice and supple for reaction tires and check out straight line spoilers I've got a few of them and they work great
pretty sure ill be trying little things like this since my car should be on point and ready to go :) i hope lol
@@Dorkyand40 id also look at the fantom 2s3p battery there great, I just ran a 1.73 @ 86 mph
Just ordered my DRK and 3T with Wireless link. Thanks for the info bud !
Nice. Fun times ahead
What is everyone using for shocks/springs on Outlaw cars? I have a set of Hot Racing shocks (TD90X06) that fit well with my 22S. My problem is finding different weight springs for tuning. Any help would be greatly appreciated.
Keep up the great videos. Your channel has taught me more about this end of the hobby than any other!
Custom works springs. Offered in many lengths and weights
@@Dorkyand40 👍Thanks bud! I was looking at those and was unsure.👍
I can wait do get my Drag Cars out..my dr10 and my b6.2 iceman Chassis......its do Cold in Europa nice day Manuel from Europa Austria 🇦🇹
Hope it comes soon friend. Cold here too
Damn, I wish you made this video last year.. Lol
My losi it took a lot of work and still getting there.
yeah man it took all year to learn it lol
I see it in the back ground You're a Star Trek geek. I see the Defiant.
Wow nice man!! Good call out!! One of the hardest and best models I’ve ever built :)
@@Dorkyand40 I have the same model I know what you mean. You should try building the Polar lights Enterprise refit. 1/350 scale. I have own that kit for 8 years now and it intimadates me still. I do custom lighting effects and the paint that is required for it is really hard to do. Some day I'll start it.
I got a drag slash. What should I do to make it go straight and faster
what do you think about the Dragrace Concepts AXIS Tires????
ive debated on ordering a set but ihavent seen many people say they are much better then the reactions. seems like voodoo is still the one to beat..maybe the cyrul tires will be good
@@Dorkyand40 Just sanded mine,.....they are STICKY! Sat them on my desk and it looks like I did a burn out,....( they weren't on the car) I'm trying them sunday. let ya know. ( no foam, ribs cut out)
Chad side note Bro, quick question what do you think I should set my DRK 3.5t can timing at? it's paired up with MMX8s currently (eventually I'm gonna get the Big Boy 4 pole castle motor) but for now, I'm also running timing on the esc. I wasn't sure if the DRK had sweet spot on the end bell for timing ? Thanks Buddy
think most of us have found that around 32-34 is actually around 30 so that would be a good start without using an analyzer
@@Dorkyand40 Ok cool Thanks, I appreciate the jump start 🤙🏽💯🏁
Have you ever tried weighting the inside of the wheel ? Add weight and balance all in one I would think.
Just balance with the putty inside of the rim. That’s it.
👀💯 morning goodness 💪🏾💯
Hey hey
Awesome information in this post Chad. How you messed around with the 22s roller?
I haven’t. Only one I haven’t touched yet. All
Of this should def apply though.
My dude I’m going to get a losi 22s with 71 gto body , going to go nuts on it and make a big chief tribute
You Cut the showtime Wheel or Take it wide on a Normal Reaktion..tire nice day
showtime+ uncut..glue em up and good to go with foams or air if you want to try that
Thanks as always for the knowledge and thanks for the video sir !
Do you run posi traction or a thick diff fluid? I have posi now without any good luck.
slipper and 250k in the diff. use your esc or radio to control your launch. start low and find out how much it will take..smooth is fast..build the speed down the line. it will change throughout the day based on the road..your tires and the prep and heat
@@Dorkyand40 ok thanks I'm going to try that.
Great job 👏🏼
Thank you!! 😁
Hi sir have you known anyone to rig the sky rc tire warmers Without the sky rc module
not that i know of im sure it can be done with some soldering and meter checking
👍
Don't forget to balance your tires on your dr10 video of it
Good call. Always balance the rubber
🎉🎉🎉🎉🎉
:)
Hey need help with my maclan drk esc 160,I program esc,it’s n Reverse can’t get it to go forward try to Reverse the program it still goes in reverse try to go Norman is still goes in reverse can someone help me with 160 Dragrace king esc?
Start with a new model in the radio and then calibrate the esc per maclan instructions. If it still is in reverse then change the motor direction in the maclan app and not the radio. You can also swap 2 of the motor poles so desolder 2 of the wires from the motor and swap them and resolder.
@@Dorkyand40 thanks,I haven’t tried changing the model but I did try reversing the motor it didn’t change so I will try changing model,thanks again
New Shark bodies dropping tonight.
And no Traxxas love :(
Can’t wait for my Traxxas Breakout to arrive.
Just not enough experience with that car. Powermad on UA-cam is the man for that. Check him out.
@@Dorkyand40 I’ll be racing with him next weekend in Okeechobee
This weekend actually
There you go my man
Just add money 💰
Lots :)