Low Slope Roofing. What is the Best Material
Вставка
- Опубліковано 8 вер 2022
- Low Slope Roofing. What is the Best Material?
Drew’s Roofing and Home Repair.
Southport NC 28461.
Re-Roofing Brunswick County NC Roofer.
Shingle Replacement and Repairs.
Complete re-Roofing. 14 sq total.
12sq shingles, 2 bundles caps.
2 Bundles Starter Strips.
17 pieces new Drip Edge.
Total labor and Materials.
Southport NC Roof repairs and replacement. Call Drew at Drew’s Roofing And Home Repair for your free estimate today.
910-294-1761. - Навчання та стиль
You kept saying the broom would make a difference and it sure did! I could see the rubber laying down smoothly while Paul was sweeping!! Thank you, Drew!
You have to push the rubber down into the product in order for the two of them to bond together. Is a very important step of the project thank you for watching
Drew ..it looks like another qaulity Drew job...good work..Drew and Paul.. thank you
Thank you I appreciate you being able to see quality work
i have a flat roof over my pool patio and the edges are all rolled up....great video Drew and thanks for sharing
Thank you for watching my friend I hope my video helps you to repair yours
Great video Drew and a lovely job
Thank you David. Hard work never killed anyone
Thanks for sharing. Nice job!
Thank you Ruth this is an amazing product for low slope roofing areas
I thoroughly enjoy watching your channel. Your narration is rock solid and you make it easy to understand the process. Sometimes those explanations result in me realizing I need to hire someone and not attempt that particular project . I've been saying for years that mobile homes are the last affordable housing for home ownership. I'm glad folks are spending the money for proper upkeep. SFH and apartments here south of Atlanta and close enough to commute to the city run way over $1000/mon. Last SFH I rented (5 years ago) was $1450/mo.
Wow prices are insane. I have a Doublewide that I rent out for $1400 a month.
Thank you for the amazing comments I appreciate it when people can appreciate good work. I try to make it easy for you.
I just bought some land with a 1984 single wide with a roof that leaked and rotted out sub floors by the windows.
Wife showed me your channel last night, and it’s been a great source of information already- thanks for your informative content!
If there’s anything I can help you with in particular let me know
Great job!!!!!🤙🏼💪🏼
Thank you William. It is a very good product for low slope roofing one solid piece
That looks like the same roofing rubber I put on box trailer roofs! That stuff is awesome! Nice job Paul 😉👍🏻 Cheers Drew 👍🏻
Thank you Bush dog. This product is amazing I love it way better than half lap rolled roofing
@@Drewsroofingandhomerepair I think it was half lap we used on the rig camp trailers
Half-life used to be the thing back in the day you won’t find many people that use it anymore. Half Lapiz old school EP DM’s new school
And it is all done with just one piece
Hey Drew how thick OSB board do you use on the old mobile home ?
My dad's has a rounded roof, no peak, so I think the OSB board would have to bend.
Thankyou guys.
Welcome
You NEED to use low VOC PRIMER when putting cover tape on the drip edge… that cover tape will not last just going directly onto the rubber just by cleaning it with membrane cleaner
Interesting! Looks good for low slope. I have seen plenty of torch down for low slope.
I’m not a big fan of torch down but it will work
@@Drewsroofingandhomerepair It seems to be popular for low slope in SoCal, but of course we don’t get Snow or much rain. Thanks for the response.
Yeah boy let’s go my good friend.
Thank you for watching your the best
Good jon
Thank you for showing us how to put on a rubber roof. Can you tell us what is the brand of everything used in the job? Thank you again
ABC supply is where I get all my materials
Would have loved to see the finished product from afar to get what kind of a slope you were working with. Also, if you could just tell me what you were using as cleaner? After watching this video, we are now considering rubber roofing. Good video, thanks.
Poling I did the Rubber Roof that’s all of it that we did somebody else did the rest so I might unable to show you the finished product unfortunately as for the cleaner I’m using EP DM rubber roof cleaner. It comes in a gallon can white with red letters, I can show you another video that shows the cleaner that I’m using this is the video.
ua-cam.com/video/SHpItm86bvQ/v-deo.htmlsi=uFmz6LykfXyPxC7z
What can you cover top of EPDM / rubber with so it doesn’t look like $h!* from the road?
Frank Lloyd Wright Prairie Style house & whole thing is 1-1/2 - 12 pitch roof.
Insurance denied rolled asphalt so looking for options, but decorative low slope roofing options. Asphalt build-up can be covered in small stone like pea-gravel.
Is that possible over rubber??
EPDM can be painted white. Or just use TPO it is white and makes for a good roof
great video. what type of cleaner did you use
We are installing a Rubber Roof the kind of cleaner we are using is made for EP DM. It would say EP DM cleaner I’m pretty sure in a few of my videos I show it you might’ve missed it if you did any fast forwarding or anything like that.
I have a slow slope a addition was added attached to the my house so it is separate from the roof of the house so what would be the best material to use if the addition is only leaking
Use hydro stop it is a 3 part deal. But it will stop the leak. ua-cam.com/video/AGnQow7qus4/v-deo.html
Did you forget your primer for the cover strip
No I just did not record a step. I was like dang it. I didn’t pick up my camera and it got done before I could show
Hello, can we apply the rubber roof on the existing garage metal roof? Thank you.
No. You need a flat surface to install rubber
What is the best way to hoist the epdm up on the roof if it is just two of you? The size we need for my mobile home weighs 1125 pounds according to the Amazon link you provided in the previous video I watched.... thanks!
If you notice I use 16 foot pieces and I carry them up on my shoulder. If you were to try to make it in one piece my guess is it would be a little more difficult. But it can be done you would have to put two ladders up fold the rubber up at the bottom of the two ladders. Make sure to secure the top of the ladder so it does not slide. Each person would grab a corner and walk to the top of the ladder and then just accordion style pull it up to the roof
@@Drewsroofingandhomerepair Thank you so much for the reply...
I try to reply to all my comments thank you very much for spending part of your day with me.
@@Drewsroofingandhomerepair That in addition to your willingness to be so helpful is what we appreciate...have a blessed one!
I installed a roof hatch on a rubber roof. I cut through the 1× and a layer of roll roofing. I was quite surprised to find a layer of sand, another layer of a roll mineral, then partial board covered with rubber. I estimated $20,000 to remove and replace it.
Have you ever heard of sand being used?
Never ever. What the heck? Interesting how would sand work??
@@Drewsroofingandhomerepair the only reason I could come up with was for a fire block. It was a serious mess that I wanted nothing to do with.
Very interesting to say the least. I never heard of it
Question: If that adhesive will stick to anything then why not put the drip edge on first then glue the membrane down over it instead of gluing down the membrane first then the drip edge and then seam tape?
Because with single ply you always put drip in the middle
The Rubber Hass to go first because if you put the drip edge down first and there is any water intrusion anywhere it will go right into the facia metal very important to put the rubber down the drip edge and then a cover tape over the top very important to follow the steps that I took or it will not work. Everything needs counter flashing and that’s what we do I promise if you do it the other way you will regret it
The only way I would do it the other way is if I was using termination bar which is my preference but that is not what he wanted
Thank you for that comment
What’s the size of that roll? How many sqf did u cover ? I need something like that done
20 x 100 we covered around 1100 Sq ft
Greetings, I currently have a 30 by 30 addition that’s covered with shingles but constantly leaks. So I’m deciding to use EPDM , but does it comes in a 30 by 30ft roll ?
It comes in 30 x100 rolls
Also Firestone EPDM only come in 10 by 50 or 10 by 100. Which manufacturer have 30 by 100, thanks?
Is TPO a good material to use on a low slope roof (sunroom)?
Yes tpo last about 10 to 12 years
Do use the cover tape to keep the water from going under the drip plate?
Yes, that will stop water from being able to ever go under there
Yes
Do you know if roofing epdm is the same as artificial pond epdm liner?
Yes EP DM is made for artificial pons also
Ponds
60 mil tpo is the best material for that application
I like EPDM. IT WILL LAST LONGER
I wish you did work in Virginia.
I have mobile home that needs a roof
And otherwork
Is there any company around lynchburg
Virginia you could recommend.
I don’t know any companies that does what I do. We have been to Virginia in the past but traveling nowadays is expensive. We would have to charge another three or $4000 over what we did when we came to Virginia for this job
ua-cam.com/video/HnglNs_udC4/v-deo.html
ua-cam.com/video/qfTCm2WO0NU/v-deo.html
I would like my roof to get that, what is the cost for the homeowner for a roof like that.
7 to 8 thousand
@@Drewsroofingandhomerepair thank you I appreciate it
Are you doing the whole roof...
No just the rubber. Thank God
Are y willing to come and look at our roof to see if we could work with a price.
I am in southeast North Carolina not sure where you’re at
Is this cheaper than roll roofing
No road roofing would probably be cheaper, but this will outlast rolled roofing by years and years a little bit harder to work with because of its size. I buy all my material at ABC Supply.
80 pound roller will really get the air out.
I bet
No slope??
None
The OSB gonna get rotten, no insulation between...
The osb will never get wet. No worries there.
Rubber? I guess it is called epdm
Yes
@@Drewsroofingandhomerepair i hear people also talk about a pvc roof covering..what do you think about that? Better then bitumen or epdm ?
Why do they make the rubber membrane black and not white, black roof will suck in the heat, white will repel it. Should at least give you the choice.
Epdm black
Or
Tpo white.
Tpo is twice as much for material and you have to have special tools to install it. Are used to black and then the customer has the choice of white Hydro Stop on top.
Hey
Hello big country thanks for stopping by my friend
#boomfirst
Thank you my friend
MULEHIDE hands down!
All day long I agree
That's my problem my mobile home is a 78 and I'm waiting for assistants by cacs but I hope I can get my life out of this old girl
Mobile homes will last a long time if kept up. I love working on them
@@Drewsroofingandhomerepair me to this is my second one there easy if you know a little bit of carpentry skills there a good investment
I always see if it’s made of what you can fix it. I don’t care if it’s a mobile home or a mansion
@@Drewsroofingandhomerepair that’s right! Raindrops don’t care if it’s leather or fabric. I’m with you on that. My first home was a trailer house. 23 yrs old just married. Conceived my 1st kid in it. Great times!
I’m pretty sure I can see you the few kids in a mobile home lol
How irresponsible to throw that nail he pulled out into the customer's grass, can't wait to enjoy my lawn barefoot and surprise I got a nail stuck in my foot. I would never hire Mr.I'm too busy man-splaining about not putting shingles on a flat roof that I let my worker to just throw nails into the customers yard.
Find another channel as_ wipe
Exactly!
@@DrewsroofingandhomerepairDon’t be a woke butthurt snowflake.