How to Replace Front Wheel Bearing 2000-2005 Buick LeSabre
Вставка
- Опубліковано 25 сер 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/id/1ASH...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com 1aau.to/if/1ASH...
This video shows you how to install a front wheel bearing on your 2000-2005 Buick LeSabre. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2004 Buick LeSabre Limited 3.8L and the process should be similar on the following vehicles:
2000 Buick LeSabre
2001 Buick LeSabre
2002 Buick LeSabre
2003 Buick LeSabre
2004 Buick LeSabre
2005 Buick LeSabre
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/ohc/1AX...
• 13mm Socket 1aau.to/ozY/1AX...
• 15mm Socket 1aau.to/ozY/1AX...
• 19mm Socket
• 34mm Socket 1aau.to/oh/1AAS...
• Brake Caliper Hanger 1aau.to/obb/1AX...
• Needle nose pliers 1aau.to/oej/1AX...
• Needle nose pliers 1aau.to/oej/1AX...
• Ratchet 1aau.to/oCj/1AX...
• Socket Extensions 1aau.to/ozY/1AX...
• Torque Wrench 1aau.to/oqJ/1AX...
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• Center Punch 1aau.to/oby/1AX...
• Floor Jack 1aau.to/oiy/1AX...
• Hammer
• Jack Stands 1aau.to/ohN/1AX...
• Wire Brush 1aau.to/ocH/1AX...
Subscribe: / @trq
Check out our playlist:
Buick LeSabre 8th Gen 2000-2005: • Buick LeSabre 8th Gen ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This is by far the best mechanic, DIY channel on UA-cam
love those old Buick's
2004 Buick Lesabre checking in with 235,000 miles. Still going strong!
Never have I ever witnessed one come off so easy in my life entire like wth
icon ratchet.
interesting to see how many shops are starting to leave big name and move towards the freight
I want to know where I can find a mechanic like this guy.
Awesome content beo. Very in depth. Keep it up
5:50 Give it a couple loving bonks 🎉
That brake caliper need to be replaced
Has anyone bought parts from TRQ and can recommend em???
👌
Those brakes were bad.
Didn't mention bleeding the break fluid
Why would you except because you are already in there? You did not open the brake system so no air was introduced. It is still a good idea to actually flush it while you are in thre because no one follows the 3-5 year brake fluid flush spec.