O4 Air Unit Park flying in Crux35
Вставка
- Опубліковано 7 лют 2025
- Uncut, just getting used to the weight and feel. Looks pretty good in my eyeballs while flying. Was pretty nervous overall on this one. Crashed the last two times I flew this frame.
O4 Air unit(lite), Crux35 v2(was analog), 5/9v bec, mounts edited(not well enough) to use 3 holes, only using 2 currently. Wired the O4 to the open uart1 connection.
Newest mount- meh, try it please give feedback. As someone who is newer, it can be invaluable.
www.thingivers...
In betaflight I then had to activate the uart1 as an MSP and set peripherals to MSP+display port. To get the osd working right, I had set it to HD and ran a cli command "set osd_device_displayport_device = msp".
Hi, i just gonna do the same build with o4 and crux35. Can you tell me where you wired the bec and witch one you choose the 6 or 9v ?
Matek Micro BEC 6-30V to 5V/9V. Wire directly on board to bat + and bat - accordingly.
Just to clarify my almost unhelpful comment. I soldered the bec's 9v pads to make it 9v. Because the 5v is also 1.5a, peaks at 2.5a. Which may lead to brownouts. So I just went 9v 1.5a with the 2.5a peak because that is more power. Flight times increased from having a thumbro w taking power on top of the analog system.
@@RuToClose that sound nice 😎, i gonna do the same with BEC 9v/1.5A from battery to dji o4 .Thank you for reply 👌