How To Install A Vinyl Swimming Pool Liner On A Pool Kit From Pool Warehouse.
Вставка
- Опубліковано 28 сер 2024
- Pool Warehouse!, Selling inground Pool Kits Online For Over 26 Years!
Click Here: bit.ly/1oH175L Too Shop Our Swimming Pool Liners!
Pool Warehouse has been selling swimming pool kits online since 1998 making our company the oldest and largest factory direct inground swimming pool kit company on the internet. Click Here bit.ly/VhV8aj to shop our pool kits!
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Tough way to install a liner. Next time, take it out of the box at the breakover, place the liner at the center of the breakover with the arrow facing the stairs. Two people pull the liner to the stairs and install the steps first. Then work your way back to the breakover. At that point, have at least one person on each side of the pool pull the remaining liner to the deep end of the pool. Install the liner in the bead making sure the corners are where they belong and work back toward the breakover.Try it, you'll like it.Rick
Rick Tanguay. My dad has been in the pool industry for over 37 years. He has been doing it the way you just said. I have bean working with him for 8 years I like it, it’s a pretty fun job (but) can be tough sometimes.
When I installed my liner with steel steps it was not as easy as this video made it look. I would like more information on how the liner fits in the space between the steps. Could you possibly provide more help videos with tricks and tips to fit liner in those steps. It was a miserable experience for me. I really like the look of liner over the steps, just has to be an easier way.
Agreed, and my liner came with a reverse bead over the steps. I had 15,000 gallons of water and no fix. Had to work around it and still was charged for the bead incorrect.
Easiest way to install is from the outside actually
Start from which ever end and start rolling it in and hooking into track a section a time I do this every day at my job
would of help to know you need to fill pool half way before cutting all the return and skimmer holes
❤
Can I screw in the brackets for the stair rods into the steel stairs on my in-ground vinyl liner covered steel stairs when I replaced the old liner I found the rods are embedded in the sides of the stairs
You will need to request "rod pockets" be added to the design of your liner when looking to replace in the future. The rods should come out but we would recommend verifying first. Most manufactures, like Hydra Pools, no longer use rods and have gone to a tab method. It's a much simpler process but the rods should come out unless other issues have come to light.
I took my liner off the rods are embedded into the sides of the stairs they look threaded on the ends the rods are Rusty I use the vise-grips I cannot return the rods
Man, that's deep
Thanks for this perfect video!!!!! Can you please advise on what material is being used for the wall boards
galvanized steel
How long to suction out enough air? The neighbor's has been running 24/7 for a coup[le of days.
Very good
ua-cam.com/video/u4mmkyG2Yok/v-deo.html
I liked the music on this educational video
What size pool liner is this??? 16×32???
I'm in the process of Replacing my liner.I now have my liner out. It's been out for about a week, and we are waiting for our liner to be made and shipped to us.The pool floor actually looks really good!! However, there is some ground water weaping at a few of the seams of the polymer walls where the floor meet... , and some sand from behind the wall too. Not a lot , of water, but some. My questions are 1) should we repair these weaping areas? , or not be concerned? 2) if I am going to repair this, with what product? I see a product called Hydracrete that works on wet/weaping areas, but I don't know if it is too rough for the underside of the liner.? Or should I use pool crete? If yes to the pool crete will it bond well? I saw the video on making old concrete bond with new concrete-- It said to Clean the area well, acid wash, then make a slurry of portland cement, water and a glue product by quick crete-- then paint it on, then apply the new concrete( Or pool crete is my question?) I don't want to mess up what looks like a really decent pool floor, but I don't want to regret not repairing the leaky areas either. And just FYI, we do have a sump pump in an underground barrel with holes in it to pump out ground water, near the pool, and this worked well to keep out ground water from collecting under our liner. I'm open to any and all suggestions!! Thank you!!
Curious to hear what you ended up doing. It seems like it’s something that needed to be fixed?
Tienen compañía en new Jersey busco para que me hagan este trabajo
I’m watching for information not entertainment. I’d rather have someone narrating instead of the music, just sayin.
very goof❤
great job. what are the messurment and depth?
No bottom drain needed?
How wide is the concrete deck?
good
LoLo LoLo doog
@@otfchris3702 ua-cam.com/video/u4mmkyG2Yok/v-deo.html
Step 4 is wrong. Open liner in pool where you know it’s clean of debris. Their boots are leaving little bits of stuff that could puncture your new liner.
This drummer is sick.
It's electronic
Good job
What about all those wrinkles...? What the best way to prevent them?
go with fiberglass or concrete, liners will have wrinkles
82 contractors from California have viewed this video
ua-cam.com/video/u4mmkyG2Yok/v-deo.html
What size pool was that?
Cool music whose the artist
the one, the only, the amazingly talented, cat love'n, God fear'n, B3 doctor of love, Don Eanes!
That music was fire
Hello! Looking for an installer of this type of pool ASAP in the Dallas, TX area. Please provide your contact info if available and in that area.
why is it recommended to use foam on the steel walls?
Offers a barrier between liner and wall to preserve the liner from punctures and damage in the event the walls have any sharp surface...also prevents it from sticking to wall
@@nathanielmoore5677 That's completely backwards and incorrect. Lay a piece of paper on your desk and try to puncture it with a pencil. Impossible.
Now place a thin piece of foam under the paper and try.....hole!
Hi
Can y'all show the son of a gun full. SMH
good
good