Yes, the quality is very good. But it's almost too good for me. With a metal channel I wouldn't need this camera movement. It's more of a gimmick for me. simple but on the point is enough for me. my opinion
I stopped watching before the first minute was over, sorry. Way too much movement, changes, pure stress and hence odd chaos for my eyes. And the music - like an oversponsored rallye cars TV channel. Bye bye
👍👍👍👍👍 Как я люблю РУКАСТЫХ людей! Ребзя! Вы супер! Все ваши творения должны заноситься в отдельную книгу - "Те кто достоин УВАЖЕНИЯ"! Так, и никак иначе! Вот кто ест свой хлеб не напрасно! Уважаю людей с прямыми руками, и тех кто к этому стремится! На таких ещё и держится всё общество👍👌
Отличная работа, сразу вспомнил свою учёбу по токарному делу, когда болванки летали по цеху 😁 а теперь спустя года понимаешь, что токарное дело-это искуство. 👍👍👍
Your skill level is on another level. Strange use of a boring bar tho when you angled the vertical mills head I personally thought you might of used a end mill or at least a tool with more cutting teeth on it plus I thought your set up would of had a lot of chatter happening? but fair play if it worked. Love watching your videos. Very jealous of your set up as I used to be a machinist and fabricator but now full time as a designer in the world of CAD. Used to really enjoy being on the tools. The one thing I never did for some reason is screw cutting and wondered if you could do a short video on that as would be really interested. Amazing stuff as usual 😎
Изделие сомнительное, ну т.е. сделано качественно, тут 100% не поспоришь, но это обычный арбалетный трубогиб за дорого, который не сможет качественно согнуть трубу, автор конечно пытается выбрать выгодные ракурсы, но если внимательно посмотреть, то видно что трубу сплющивает в месте загиба
@@ПасенкоФедор метод отличный для водопроводных труб, там большого внимания не придают замятым углам, но сантехники не будут использовать такой сложный и дорогой трубогиб, как в видео, достаточно на основе домкрата с оправками, но если более ответственные заготовки гнуть, то он не справится, большие требования к сохранению окружности, я варил каркас , там одно из требований было для 45мм трубы , не больше 2мм сплющивания, арбалетом испортили кучу трубы, и с песком и с нагревом, но нужного результата не получили, в итоге получилось на том где колесо(пуансон) наматывает на себя трубу
@@ПасенкоФедор да пользуются все, правда труба немного плющится в месте сгиба, но не критично. Для больших диаметров обычно используют прокатные станки, как для листового металла. В данном случае, ну уж сильно заморочился мужик, потратил времени и материала больше, чем стоит такого типа инструмент с ручным гидронасосом, и все ради сомнительной скорости в гибке. Туда еще и не хватает угловой разметки по градусам.
@@andriyxadir А нафига твое пресловутое качество? разве что эстетическую важность играет а на ттх ни как не влияет, наоборот в некоторых случаях для упрочнения изгиба делают с внутренней стороны отформованный валик. А вот сделать самому если могёшь и практикуешь почти всегда дешевле и надёжнее.
Always awesome to watch these videos! Next make a automatic tig welding machine something similar to your plasma pipe notching setup please 🙏 People please like this comment so Make it extreme can build it please 🙏
That's fun to see it all from nothing, really impressive how well it aligned. If you pack the tube with sand or something, can you get nearly mandrel type bends? I'd also be tempted to heat the stretch side at the same time.
I was working in Grand Blanc Michigan at a shop. This is the job I had. The machine had a number of parts it put out. I doubled that number the first time I ran it. By the end of the night they had enough parts to run all day long the next day without starting the bending machine
Ciao Artigiano !!! Sei un Maestro e hai le mani d'oro ! Sono davvero esterrefatto dalla bravura e competenza !!! Complimenti e grazie molte per questa tua gentile condivisione, ciao Nicola from IT
I hate it when people say “I made this ____” when what they really mean is “I assembled this____ from a bunch of parts that I bought”. Don’t say you made it unless you actually made it. 3 cheers for making this project top to bottom!!!
that is one heck of a build. The Hydraulics part of the build was great to see man. I love the lathe and milling machines but cannot afford to buy those bad boys. I will only be buying the smaller versions but for my purposes in a small home garage workshop they'll be fine for me. Really enjoyed this video bro. U have got some crazy machining skills. The machines always help but the experience and knowhow of how to use them correctly is the real reason u make sUch phenomenal work pieces man.. Salute to u there from a DIYer in Dublin, IRE..
No pipe made stands a chance surviving this beast-excellent in every way as always! Only wish I was able to give it more thumbs up. 👍👍👍 God bless. [edit]: Btw-an excellent job re: filming/editing as well.
Gran trabajo,se nota que se divierten haciéndolo Cada vez que hay video nuevo;pienso..... A ver que se les ocurrió ahora,😅😅 Para mi gusto,la edicion tiene demasiados cambios de plano,y demasiado rapidos Y,la musica....,sobra El sonido de las maquinas trabajando,creo que estaría mas acorde Esto,desde mi punto de vista,aunque como es su canal;pueden hacer lo que les de la gana Mientras mantengan ese punto de locura fabricando esas maquinas locas,con las que nos sorprenden de vez en cuando Aqui seguiré 👍👍👍👍
Yeah, there are too many cuts, I understand that the things you are building take time, and you will end up with hours long videos if you put everything in them, but it gets dizzy after a while with all the cuts
Im not even watching make it extreme anymore. I like the build and technical videos beceuse i get relaxed by them. Seeing how someone else tackles technical difficulties AvE, TOT, CEE, marty t and many more are brilliant because of that . This is not relaxed anymore. It is braking my head down
He could have just built the pipe bender and thrown in a off the shelf hydraulic cylinder but instead he built it also, props to him for not cutting corners. 👏
Very nice. Extreme as always guys. Music was great for my taste but sometimes a bit too loud as sometimes, I could not hear the machines as, personally, I love watching the chips fly and hear the meanness and aggressiveness of the tools working. That was a whole lot of work in a short video. Thanks again for another great video. Let those hot chips fly!
What do you do, work for a fabrication company or a machining company that lets you use their machines to make these videos? I wish I could afford all these machines! I like watching you make this stuff!
Hey guys, are the plans for this available? The link to your patreon page doesnt seem to specify whether this is available. It seems like the perfect bender for my needs so keen to get one made. Thanks for the great vid
This is the reason I subscribed in the first place years ago. Welcome back. 100%. Points for content full marks. Editing full marks. Points for content full marks. Keep up the good work. Greetings from Mozambique 🇲🇿
Excelent video as well as craftsmanship. I’m a lazy toolmaker and would have simply bought the hydraulic cylinder 😂. Safe to assume you made all the rollers as well. Thats the bitch of tube benders having to buy so many different dies. Unless of course you only bend one size tubing. Well done sir.
Be careful, the barrel of that homemade hydraulic cylinder does not look adequate to support 10000 psi, which is what is commonly used in cylinders in this application/size.
Great job guys! 😉
Thank you!! 😁
@@MakeitExtreme you are a single identity or two person.
Это невероятное изделие!!! Ваши руки растут из правильного места..... Это достойно уважения! С наилучшими пожеланиями из России!!!!👍👍👍
Can we all take a moment to appreciate how good the video production quality is getting.
Too polished - I prefer real nitty gritty showing details
Yes, the quality is very good. But it's almost too good for me. With a metal channel I wouldn't need this camera movement. It's more of a gimmick for me. simple but on the point is enough for me. my opinion
It's terrible. Changing the POV every 3 seconds may feel sexy and cutting edge, but it just makes me dizzy. Thumbs down
I stopped watching before the first minute was over, sorry. Way too much movement, changes, pure stress and hence odd chaos for my eyes. And the music - like an oversponsored rallye cars TV channel. Bye bye
It's been great all along! Long time fan here 😊
👍👍👍👍👍 Как я люблю РУКАСТЫХ людей! Ребзя! Вы супер! Все ваши творения должны заноситься в отдельную книгу - "Те кто достоин УВАЖЕНИЯ"! Так, и никак иначе! Вот кто ест свой хлеб не напрасно! Уважаю людей с прямыми руками, и тех кто к этому стремится! На таких ещё и держится всё общество👍👌
Отличная работа, сразу вспомнил свою учёбу по токарному делу, когда болванки летали по цеху 😁 а теперь спустя года понимаешь, что токарное дело-это искуство. 👍👍👍
Ein geschickter und hochintelligenter Handwerker!!!
Your skill level is on another level. Strange use of a boring bar tho when you angled the vertical mills head I personally thought you might of used a end mill or at least a tool with more cutting teeth on it plus I thought your set up would of had a lot of chatter happening? but fair play if it worked. Love watching your videos. Very jealous of your set up as I used to be a machinist and fabricator but now full time as a designer in the world of CAD. Used to really enjoy being on the tools. The one thing I never did for some reason is screw cutting and wondered if you could do a short video on that as would be really interested. Amazing stuff as usual 😎
Always amazing craftsmanship! I never get tired of watching you make things. Thanks for sharing your talents with us
Это тот контент, который не стыдно назвать качественным. В этом видео прекрасно все и монтаж и видео ряд и качество работы и изделие
Изделие сомнительное, ну т.е. сделано качественно, тут 100% не поспоришь, но это обычный арбалетный трубогиб за дорого, который не сможет качественно согнуть трубу, автор конечно пытается выбрать выгодные ракурсы, но если внимательно посмотреть, то видно что трубу сплющивает в месте загиба
@@andriyxadir т.е. сам метод арбалетный "ПОРОЧНЫЙ" что ли? от него все отказались??? в чём проблемы как их исправить?
@@ПасенкоФедор метод отличный для водопроводных труб, там большого внимания не придают замятым углам, но сантехники не будут использовать такой сложный и дорогой трубогиб, как в видео, достаточно на основе домкрата с оправками, но если более ответственные заготовки гнуть, то он не справится, большие требования к сохранению окружности, я варил каркас , там одно из требований было для 45мм трубы , не больше 2мм сплющивания, арбалетом испортили кучу трубы, и с песком и с нагревом, но нужного результата не получили, в итоге получилось на том где колесо(пуансон) наматывает на себя трубу
@@ПасенкоФедор да пользуются все, правда труба немного плющится в месте сгиба, но не критично. Для больших диаметров обычно используют прокатные станки, как для листового металла. В данном случае, ну уж сильно заморочился мужик, потратил времени и материала больше, чем стоит такого типа инструмент с ручным гидронасосом, и все ради сомнительной скорости в гибке. Туда еще и не хватает угловой разметки по градусам.
@@andriyxadir А нафига твое пресловутое качество? разве что эстетическую важность играет а на ттх ни как не влияет, наоборот в некоторых случаях для упрочнения изгиба делают с внутренней стороны отформованный валик.
А вот сделать самому если могёшь и практикуешь почти всегда дешевле и надёжнее.
Always awesome to watch these videos! Next make a automatic tig welding machine something similar to your plasma pipe notching setup please 🙏
People please like this comment so Make it extreme can build it please 🙏
I was stressed and dizzy watching this, To bad because the skills an build is awesome .
The music gave dizziness, too loud for my taste. The skills and build remarkable !!
The videos keep getting worse. It's less make it extreme and more how many unnecessary out of focus shots of a lathe can we fit in
@@jonnymiskatonic lol, more 'video extreme'
That's fun to see it all from nothing, really impressive how well it aligned.
If you pack the tube with sand or something, can you get nearly mandrel type bends? I'd also be tempted to heat the stretch side at the same time.
I have lathe envy....My southbend is not a grand as yours but I am going to try and build one of these!! great video...
Great video as usual, music seemed a bit louder than it needed to be though.
The volume button has been invented for quite some time now
I was working in Grand Blanc Michigan at a shop. This is the job I had. The machine had a number of parts it put out. I doubled that number the first time I ran it. By the end of the night they had enough parts to run all day long the next day without starting the bending machine
you are an artist man love watching all your projects
Ciao Artigiano !!! Sei un Maestro e hai le mani d'oro !
Sono davvero esterrefatto dalla bravura e competenza !!! Complimenti e grazie molte per questa tua gentile condivisione, ciao Nicola from IT
Nice job guys! Do you guys still use the ball mill to make the metal chips smaller?
I hate it when people say “I made this ____” when what they really mean is “I assembled this____ from a bunch of parts that I bought”. Don’t say you made it unless you actually made it.
3 cheers for making this project top to bottom!!!
that is one heck of a build. The Hydraulics part of the build was great to see man. I love the lathe and milling machines but cannot afford to buy those bad boys. I will only be buying the smaller versions but for my purposes in a small home garage workshop they'll be fine for me.
Really enjoyed this video bro. U have got some crazy machining skills. The machines always help but the experience and knowhow of how to use them correctly is the real reason u make sUch phenomenal work pieces man.. Salute to u there from a DIYer in Dublin, IRE..
No pipe made stands a chance surviving this beast-excellent in every way as always!
Only wish I was able to give it more thumbs up. 👍👍👍 God bless.
[edit]: Btw-an excellent job re: filming/editing as well.
Gran trabajo,se nota que se divierten haciéndolo
Cada vez que hay video nuevo;pienso.....
A ver que se les ocurrió ahora,😅😅
Para mi gusto,la edicion tiene demasiados cambios de plano,y demasiado rapidos
Y,la musica....,sobra
El sonido de las maquinas trabajando,creo que estaría mas acorde
Esto,desde mi punto de vista,aunque como es su canal;pueden hacer lo que les de la gana
Mientras mantengan ese punto de locura fabricando esas maquinas locas,con las que nos sorprenden de vez en cuando
Aqui seguiré
👍👍👍👍
Oh, the trouble I could get myself into with a shop like yours lol. The possibilities seem endless 😜…. Amazing as always to watch your work, sir. 🫡
Very very talented men who are lucky enough to make money and have fun doing it. I personally are very jealous 😊😊
I miss the old videos where it wasn't a jarring jump every 3 seconds.
Yeah, there are too many cuts, I understand that the things you are building take time, and you will end up with hours long videos if you put everything in them, but it gets dizzy after a while with all the cuts
Im not even watching make it extreme anymore. I like the build and technical videos beceuse i get relaxed by them. Seeing how someone else tackles technical difficulties AvE, TOT, CEE, marty t and many more are brilliant because of that . This is not relaxed anymore. It is braking my head down
Yes very annoying
Maestro are finally back at it again.
Thank you guys for another great making, after work these videos are relaxing to watch. Legends creating....
sending love from Athens Greece
6:24 genuinely thought it was a brick lol, alsome video as always cinematography on point as always.
Was just coming to the comments to question if anyone else thought it was too
I thought it was a block of wood. 😅
Me too, I thought it was a brick. lol.
Hello mister beautifully made professional workmanship good job well done
Awesome construction...love changing the face....of a piece of material to make something useful!
Beutifull Built ❤ but can it make a 90 - 180 degreed bend without filling the pipe with sand ❓
What impresses me the most is that y'all fabricate your own hydraulic apparatus.
The amount of engineering and design that went into that is asstounding.
He could have just built the pipe bender and thrown in a off the shelf hydraulic cylinder but instead he built it also, props to him for not cutting corners. 👏
❤never fail to please and amaze. Great work. Thanks for keeping it going.
Very nice. Extreme as always guys. Music was great for my taste but sometimes a bit too loud as sometimes, I could not hear the machines as, personally, I love watching the chips fly and hear the meanness and aggressiveness of the tools working. That was a whole lot of work in a short video. Thanks again for another great video. Let those hot chips fly!
Videography is sick
Господи как это красиво! нихера поначалу не понятно, но просто великолепно!!!
hmm .. looks like you could bootstrap a driven gear on the roller if your push blocks also had roller dies profiles..
Another nice build. A build like that is on my list of tools I want to make.
Baddest dude on the planet
You need a “Make It Extreme”powdercoating oven
ua-cam.com/video/8j0JyVFBjOo/v-deo.htmlsi=bJHyL4s4t9OOY2O-
I like all of your machines but this one is really excellent.
You make it look so simple! Great video!
you could've machined the U groove on all 4 sides of those square blocks...
Awesome video as usual! 💥💥👍👍
Вы классные, я вас люблю! красивая картинка и потрясающие работы!
TOP-Super gemacht.
مبدع ماشاءالله 👍
Can it do square tubing?
Good product. Those 2 square parts could be rounded, for to make it more efficient to bend in different angle and longsides
Please? What is the distance between the two rollers for each steel tube and its diameter?❤
Real Machinists 🤠👌 thanks for the Show👌🤟🤘
Ok, now it's time to re-make all these tools again with different color 😜🙃
You indeed make a very extreme mashine 👍
always love your work........love from Pakistan
Fantástico!!! A qualidade é o acabamento nota 10. Gostei
Love your vids. Wondering if you have built an iron worker yet? That would be good to have, a handy little item.
Ποιότητα μόνο..epic!!
عمل رائع جدا 👍💪
What do you do, work for a fabrication company or a machining company that lets you use their machines to make these videos? I wish I could afford all these machines! I like watching you make this stuff!
Very Nice ❤
Cool I watched it with pleasure ! I know how to operate all these machines, but I don’t work on them.
Very Nice!
nice build you're awesome guys .
Nice to see a video, with somebody not wearing gloves, and building with there hands
Awesome machine
I would love to have a machine like that! It is awesome!
When will you be selling this I'll buy one
Hey guys, are the plans for this available? The link to your patreon page doesnt seem to specify whether this is available. It seems like the perfect bender for my needs so keen to get one made. Thanks for the great vid
Hello! Yes is available on our website. Thank you! Link Here: www.makeitextreme.com/merchandise/plans/
Thanks, not sure how I managed to miss that but plans purchased. Keen to get started. Thanks
That's a lot of material being used...How much would you sell it for?
Great work, results “ kinks “ all corners if bend 180 degree (waste times and materials)
what type of metals are used for the casing and for the shaft?
Also type of alloys if available
super cool 😊
Not really sure why everyone is so amazed. It's nothing but math and time.
Show me how it's done then 😊
This is the reason I subscribed in the first place years ago. Welcome back. 100%. Points for content full marks. Editing full marks. Points for content full marks. Keep up the good work. Greetings from Mozambique 🇲🇿
great tool🔧 thanks my dear friend ❤♥
You are GREAT 👍
Well done👍
Good job! You really need to get a good inserted shell mill. That fly-cutter is dangerous!
Bravo Make!
Now try with thin walled tubing.
Saludos desde Mexico Bro
20k likes and 69 comments 😢
leaving mine: haha love the channel ❤ awesome build 😮
Saludos desde Argentina
I wasn't sure if I was watching a pipe bender being made or if this was an intro to a Mission Impossible movie. That music was way heavy!
Excelent video as well as craftsmanship. I’m a lazy toolmaker and would have simply bought the hydraulic cylinder 😂. Safe to assume you made all the rollers as well. Thats the bitch of tube benders having to buy so many different dies. Unless of course you only bend one size tubing. Well done sir.
Пол часа видео что бы понять как и чем согнуть трубу .. молодец конечно приблула красивая .. но трубу можно согнуть гораздо проще
great for the instant gratification generation but a pipe bender is low hanging fruit. a properly functioning tube bender would be truly impressive.
good work man
No safety glasses when turning!? Please use them so you can keep making great projects!!!
Like honestly do you see what he’s turning? Any mishaps safety glasses won’t do sht when it can take your face off
Awesome build! :)
Be careful, the barrel of that homemade hydraulic cylinder does not look adequate to support 10000 psi, which is what is commonly used in cylinders in this application/size.
doesn't work with 90° ?
Non finirete mai di stupire...siete dei bravi artigiani...mettete cuore è anima nei lavori e nei video...🇮🇹
It's much better to fill tight fit sand in the pipes, to avoid kinks at the bends.
Great job 😊
Your a genius
Nice looking build Too bad the pipe kinked when it bent.
Expert Worker.. Awesome!
Thank you