Just wanted to say- I’m a single, first time homeowner with not a lot of repair knowledge. After watching this video I was able to fix my door after adjusting the electrical wire in the sensor (the light was not on- no power) after a quick adjustment, light came on and garage door went down! THANK YOU SO MUCH, you saved me so much money!!🙂
Welcome to the world of home ownership. As a decades long home owner, I would encourage you to consult UA-cam first, anytime you have a pending repair issue before you call in the expensive specialists. You might surprise yourself in just how successful you might be in solving a lot of home repairs yourself as a consequence of consulting UA-cam first. There is a wealth of information here. Best of luck in the future.
You just saved me $$$. My wife was calling a repairman. I asked her to give me .a little time . I watch your channel and follow your directions. Boom!!! My wife give me a big big hug
Searched for how to fix my garage door and found this video. I found my sensors were not getting power all the time. Switched the configuration on both and BINGO it worked like a charm. Thanks for taking the time to put this out there. You were a big help to me.
THANK YOU! THANK YOU! THANK YOU!! Coming across your video was a god send. My garage didn’t close all night I was terrified and watching your video help me fixed my door
I am so BEYOND grateful for this video. I can’t believe I fixed my garage 😂 it was a sensor that was loose and facing a different direction… I didn’t even KNOW those sensors were even there until this video. Thank you zillions for saving me a fortune that I definitely didn’t need to spend! Amazing
You probably just saved me hundreds of dollars. I had no idea what to do until I watched this. Now I have fixed the problem myself. Thank you, thank you, thank you.
Thank you!! I was cleaning and didn’t realize I moved one of the lenses out of place. I was able to move it back into place and it now works again. Appreciate your video!
Thank you so much. Yours were the first video I clicked on. I followed your steps and fixed the problem. Just wanted to show my appreciation for you posting the video.
Thank you for this video! The sensors were the issue for me-one was pointing the wrong way, probably from bumping it while taking out the trash bins. Your tips made it so easy to figure out, and now my garage door works perfectly! For anyone else watching, check out all the tips in this video-they’re a lifesaver!
I know without a doubt that G-D Himself brought me to this video! My garage door would not close and I had made an appt. for repair. My grandson literally prayed that He would show me what was wrong and that it would be something I could fix. Googled and your video came up. It was the sensor! Thank you so much!!!!
Thank you so much you saved the day. I hit my sensor and didn't know it. I was about to call someone until I found this video. I realigned my sensors and the light quit flashing. From the bottom of my heart ❤ I truly THANK YOU.
You're my figgin hero this morning! My garage door hasn't closed without me holding down the button until it's fully closed for MONTHS! LOL! Someone sweeping must have pulled the wire out from one of the sensors. I reconnected the wire and it closed just fine. Thanks sooo much for making this video! Free access to information is one of the most valuable and powerful things the inter webs have to offer us.
You are very welcome. I am always happy to hear when these videos help people out! It is almost always the sensors in one way or another. Really glad this helped you! Thank you very much for the feedback and letting me know!
@@HowToHomeDIY my husband just got irritated and closed the door with his hand becuase he's got A.d.d. and very impatient however I LEARNED ALOT FROM THIS VIDEO. THANK U SO MUCH I JUST SUBSCRIBED
Great vid but wonder if it can help with this particular anomaly after re-engaging? : Mine's a brand new garage door (I'd also been moving stuff in to store). My girlfriend didn't leave her key fob so I had to open the garage manually. I re-engaged the part that pulls back the garage door but the door is now only half closing?! i.e. I note the travelling white part (that engages the black metal mechanism part of the door) is stopping about two feet away from where it should - hence the door no longer shutting. I definitely haven't broken anything but that re-engaged white part refuses to travel back to it's further forward original position. Any extra help is welcome before I try tomorrow...!
OMG!!! can't thank you enough for helping me fix my garage door issue. Mine was due to sensor wire being disconnected. I was so worried before I listened to your instructions. Advice was right on the money. I did it- thanks to you👍🏽
This video helped a lot my brother .. my garage door went up but wouldn’t come down was just getting ready to call out a garage door repairman but came across your video … I found that a wire to the sensor broke I cut back the plastic put the wire nut back on and the door closed you saved me $$$$$ big Thank You
You are very welcome. I am really happy to hear that the video was able to help you in a time of need! I hope your husband gets/feels better soon! Bless you too Crystal!
Thanks a million. I didn't even have to watch your whole video. I went down stairs & cleaned the lenses & saw one of the units had a very fast blinking light. So I just pushed on the bracket a tad until the light went solid. Now the door is working as it should.
you are my hero today 。I had exact this problem for over a few weeks, a big headache. I started fixing my garage door while watching your video, I fixed the wire,make green light on, and clean the lens ，problem solved 。 bow with respect 。 Amituofo
Thank you so much for explaining and showing so clearly in a way I could understand. Because of you I can close my garage door. No more flickering lights and an easy close
Well-done and helpful video! I've had to adjust the sensors on occasion when they had been bumped and misaligned, but was stumped when the door would open but not go down more than a couple of inches. After viewing your video I looked more closely at the wire connections to the sensors and discovered that 1 wire had come slightly loose but it was not readily apparent upon a casual visual inspection. After reconnecting it, the sensor lights came back on and the door closes properly again. I appreciate you taking the time to share your knowledge so that others can benefit from it. And your explanations and visual examples were clear and easy to follow. Thanks!
Oh my gosh, I’m 70 years old, single female and I repaired my garage door by watching your video on the sensors!!! I can get a repairman job now! 😀😂 Thank you!!!
Hey, this video was so helpful. Your another garage door video was also awesome !! My garage door wasn’t closing down and i was always forcing it to close manually by pulling via handle. All other videos talked only about sensors and mine sensors were absolutely fine. All i did was adjusted closing, opening settings and increased closing force which you mentioned in your another video. Finally i was able to fix my long problem of my garage door !!! Big thanks to you, i am myself a youtuber but honestly you are doing such a great job !!! I am your new fan !!
Thanks! Your video saved the day. We had garage door problems like the ones in this video. I followed the advice and resolved the issue. Without this video I would have called a repairman. Thank you again!
Also if you have direct sunlight hitting one of the beams, that will cause your door to not shut! I just found this out with my door! I put a piece of cardboard near the sensor to shade it, and it works perfect now. That sun would hit that beam every year in the month of February, just at the right angle to interfere with the electric beam!
Excellent tip! While it is rare, it definitely does happen. Glad you figured that out. I have heard from a couple others with the same situation. In a couple of weeks the angle of the sun will be different and the issue will magically go away haha. Thanks for the feedback and that extra tip for folks!
Very true had the exact same issue. Even if the sensors are perfectly aligned, the sun can interfere at the right angle. I deal with it all summer long……except at night of course. Cardboard works great for blocking.
Thank you very much. After watching your video, it took about 2 minutes to fix the problem. Thank you for sparing me an expensive service call. Clueless Homeowner
Thank you so much! I had the blinking red light and once I cleaned the censors it was working again! You do not know how valuable you are! #singlefemalehomeowner
This was excellent, I was having the same exact issue. I did check all items you mention. All was good but it woudnt work! I unplugged it for 1 hr then plugged it back in and it worked like a charm! So if others are in similar situation like mine it helps to unplug for a while for the it to rest. Nonetheless excellent info here
Thank you! I couldn’t figure out what was going on - checked the wiring after your video, and a small wire had come out of the wire nut! I was vacuuming in that area last night and must have bumped the wiring. Great video 🙏🏼
Thank you for sharing this! Microfiber cloth worked like a charm. Over the course of 8 years, I've left the garage door open while doing yard work and here in Arizona you blow a lot of debris from the desert landscaping. Finally caught up to the sensors I guess. $$ saved.
Hey Carla, really glad to hear you were able to save your money! I can only imagine how much debris blows around out in desert terrain. Thanks for your feedback, I am glad it was helpful!
My garage door won't close and I found your video, which is not too long. I followed your instruction and it worked. My problem is the dirty lenses. Thank you soooooo much!
So happy I took the time to research this issue, my garage has been doing this for about two months, I checked and it was the wires not tightly connected so no light was on one of them. Plus mine don’t have the cap they just have tape. Super easy fix, just wished I would’ve UA-camd sooner. Good stuff here! #singlemomhandylady
Thank you for valuable video, my garage door was the first thing you addressed Sensor was dislocated and you saved me good amount of money Keep up the good work brother
Nice! Rightly predicted a loose wire after using the leaf blower in the garage. Sensor was not turning the green light on. I was able to re-adjust and put back into operation. Thanks!
Dude, you saved the day! In the last few sentences of your video you said “9 out of 10 times it’s the sensors” and you were bang on! Thanks for saving $400!
شكرا لك جدا لقد انقذت حياتي 😂😂😂😂. كنت افكر في الغياب من عملي و الاتصال بشركة ال Garage repair. لكن عندما بحتث في الاسباب , وجدت المشكل انه هناك كيس لإعادة تدوير القنينات وضعه ابني جانب المجس. شكرا لك يا رجل يا طيب . حفظك الله ووالديكم و اولادكم ❤❤❤❤. من اعماق قلبي 😊
you just saved me from calling a tech, the sensor thing got mine going. the other issue you didn't mention was the emergency latch with a rope dangling is disengaged
After having a garage repair man come twice already, and still having issues with my garage door, getting a conversion kit that was not cheap, and my door still not closing, I finally found the issue. Thank you 🙏🏼
ALSO! The lock button may have been accidentally pressed. This just happened. The receiver was green and red, wires looked fine but the sender was completely off. Then I clicked the lock button and went right down
Hi , I was able to adjust my sensor after looking at you video and it worked . I was prepared to call a repairman . Female here - thank you sooo much !! ✅❤️✅
This was exactly my problem. Thank you! I had bumped the sensor with my motorcycle and bent the bracket therefore making an intermittent signal with the other sensor. I appreciate you!
Thanks so much for this video, saved me a repair call. It was a sensor that got tilted upwards then had the metal framing blocking it. I had just had a delivery and the door was open, delivery person put the package inside the garage and must have knocked it. I just repositioned it and door works fine now. Thanks again!
Man you helped me out. It was baffling me why wont my door close. Looked at the sensors. I have no lights my sensors. But the one was just ever so slightly misaligned. 2 min. I fixed it. Thank you.
Thank you, my friend. I really appreciate it. Our garage door has not been working for the better part of a month and my dad refuses to fix it why I do not know so I decided to do it myself.
The first issue he described, with blocking/misaligned sensors was exactly our cause!! Our green light was flickering due to a misalignment, but cleaning with a broom made the LED turn solid green. This completely fixed our garage door issue.
Thank you for this. My garage door wouldn’t close on the first button press for months. Finally it stopped closing altogether and I was so upset because I couldn’t get anyone to come out and take a look. Turns out because my home is a new construction and after settling a bit, the right sensor became misaligned by a few centimeters. I pushed it in place and the red light stopped flickering and my remotes worked again on the first push. Thank goodness! No more running in and out of the house to leave.
This video actually helped me, thank you. My issue was with the sensors, I cleaned them multiple times, but i never paid attention that there were lights on them, fortunately i have 2 garage doors and was able to compare that there should be lights on the sensors, once i moved the sensors up and down the lights came back on ...i think this suggests they were out of alignment. This has been an ongoing issue for me for a while where the door works and then for no reason stops working...I have 1 more thing in my arsenole to check now.
My man, you are a rockstar. If you were near me id buy you lunch. Just as you said, one of the sensors was loose. I probably knocked it loose while sweeping. Thank you so much. Keep up the good work.
I had same symptoms intermittent and checked everything you shared to no avail. The fix ended up something thats easily overlooked: old grease on rails that caused wheels to get stuck. Rails should never have grease. After cleaning it up the doors worked perfect.
OMG thank you so much. I just fixed our garage. It does not go down all the way and we had this issue for months. We got a qoute to have it fixed and would have cost us 1200 for it to be fixed good thing we did not go with the guys estimate and had it fixed at the time. The sensor was blocked. Thank you so much!
Had the problem all winter. I thought it had something to do with the weather. After watching the video, it took all of 10 seconds to fix. Thank you. 🙏🙏
Thanks so much. You saved me lots of time. I noticed the other sensor was blinking red while the other was okay. It turned out I just needed to clean the lens. Thanks!
Thanks! i was getting ready to call the repair man when my husband suggested going on line for advice. I. did and....VOILA! It's fixed. Great advice!
You are very welcome! Really glad it was able to help you out! Thanks a lot for the feedback and the Super Thanks! It is very much appreciated!
Just wanted to say- I’m a single, first time homeowner with not a lot of repair knowledge. After watching this video I was able to fix my door after adjusting the electrical wire in the sensor (the light was not on- no power) after a quick adjustment, light came on and garage door went down! THANK YOU SO MUCH, you saved me so much money!!🙂
Welcome to the world of home ownership. As a decades long home owner, I would encourage you to consult UA-cam first, anytime you have a pending repair issue before you call in the expensive specialists. You might surprise yourself in just how successful you might be in solving a lot of home repairs yourself as a consequence of consulting UA-cam first. There is a wealth of information here. Best of luck in the future.
You just saved me $$$. My wife was calling a repairman. I asked her to give me .a little time . I watch your channel and follow your directions.
Boom!!! My wife give me a big big hug
same here! :D
@@carlosarturomoralescordoba Just a hug???
Searched for how to fix my garage door and found this video. I found my sensors were not getting power all the time. Switched the configuration on both and BINGO it worked like a charm. Thanks for taking the time to put this out there. You were a big help to me.
Single mom, sensors were dirty and cleaned them. Worked like a charm! Thank you!!
THANK YOU! THANK YOU! THANK YOU!! Coming across your video was a god send. My garage didn’t close all night I was terrified and watching your video help me fixed my door
I am so BEYOND grateful for this video. I can’t believe I fixed my garage 😂 it was a sensor that was loose and facing a different direction… I didn’t even KNOW those sensors were even there until this video. Thank you zillions for saving me a fortune that I definitely didn’t need to spend! Amazing
Thanks, I had a dirty lens problem
You probably just saved me hundreds of dollars. I had no idea what to do until I watched this. Now I have fixed the problem myself. Thank you, thank you, thank you.
OMG...nailed it on the first try....It was a leaf blocking the sensor. You saved me $100+..Grateful.......Thank you
Awesome! Glad it helped you save some hard earned money! Thank you for the feedback!
I walked through the steps and fixed the garage door! Can’t wait for my not so handy husband to come home. Thank you!
😂 Glad it was helpful! I hope he was impressed with your handiness!
Only reasons women have husbands is for children and personal handyman.
Please don't hate me saying this as a man
I told you so.....
Thank you!! I was cleaning and didn’t realize I moved one of the lenses out of place. I was able to move it back into place and it now works again. Appreciate your video!
Thank you so much. Yours were the first video I clicked on. I followed your steps and fixed the problem. Just wanted to show my appreciation for you posting the video.
Thank you for this video! The sensors were the issue for me-one was pointing the wrong way, probably from bumping it while taking out the trash bins. Your tips made it so easy to figure out, and now my garage door works perfectly! For anyone else watching, check out all the tips in this video-they’re a lifesaver!
I know without a doubt that G-D Himself brought me to this video! My garage door would not close and I had made an appt. for repair. My grandson literally prayed that He would show me what was wrong and that it would be something I could fix. Googled and your video came up. It was the sensor! Thank you so much!!!!
Thank you so much you saved the day. I hit my sensor and didn't know it. I was about to call someone until I found this video. I realigned my sensors and the light quit flashing.
From the bottom of my heart ❤ I truly THANK YOU.
Great! I am glad you were able to easily fix it! Thanks for the feedback!
OMG thank you so much we went all winter without our garage door not shutting with our remote and you have fixed us thank you
I'VE replaced the sensors before, and with my old door the problem has resurfaced. Your vid served as an EXCELLENT refresher. THANKS
You're my figgin hero this morning! My garage door hasn't closed without me holding down the button until it's fully closed for MONTHS! LOL! Someone sweeping must have pulled the wire out from one of the sensors. I reconnected the wire and it closed just fine. Thanks sooo much for making this video! Free access to information is one of the most valuable and powerful things the inter webs have to offer us.
You are very welcome. I am always happy to hear when these videos help people out! It is almost always the sensors in one way or another. Really glad this helped you! Thank you very much for the feedback and letting me know!
@@HowToHomeDIY my husband just got irritated and closed the door with his hand becuase he's got A.d.d. and very impatient however I LEARNED ALOT FROM THIS VIDEO. THANK U SO MUCH I JUST SUBSCRIBED
Great vid but wonder if it can help with this particular anomaly after re-engaging? :
Mine's a brand new garage door (I'd also been moving stuff in to store). My girlfriend didn't leave her key fob so I had to open the garage manually. I re-engaged the part that pulls back the garage door but the door is now only half closing?! i.e. I note the travelling white part (that engages the black metal mechanism part of the door) is stopping about two feet away from where it should - hence the door no longer shutting.
I definitely haven't broken anything but that re-engaged white part refuses to travel back to it's further forward original position. Any extra help is welcome before I try tomorrow...!
Thank you so much. My garage door wouldn't close but you said to check the sensors I did and now it's working. You are awesome!😊 👍
Bro I literally watch your video just now and fix mines swear to you appreciate it
The sensor alignment was the issue for me. Thank you for uploading this viedo!!
Thanks!
You are very welcome. Glad you found it helpful. Thanks a lot for the Super Thanks and the feedback!
OMG!!! can't thank you enough for helping me fix my garage door issue. Mine was due to sensor wire being disconnected. I was so worried before I listened to your instructions. Advice was right on the money. I did it- thanks to you👍🏽
I had same issue, thank you very much.
This video helped a lot my brother .. my garage door went up but wouldn’t come down was just getting ready to call out a garage door repairman but came across your video … I found that a wire to the sensor broke I cut back the plastic put the wire nut back on and the door closed you saved me $$$$$ big
Thank You
Thank you so much, husband is in the hospital, garage door replace man out of town til April, your how to saved the day? Bless you!!!
You are very welcome. I am really happy to hear that the video was able to help you in a time of need! I hope your husband gets/feels better soon! Bless you too Crystal!
Û
@@HowToHomeDIY a
Replace kerosun Omni 85 wick
Thanks a million. I didn't even have to watch your whole video. I went down stairs & cleaned the lenses & saw one of the units had a very fast blinking light. So I just pushed on the bracket a tad until the light went solid. Now the door is working as it should.
Thank you for getting straight to the point with your video and showing the common fixes. Good information for sure.
you are my hero today 。I had exact this problem for over a
few weeks, a big headache. I started fixing my garage door while watching your video, I fixed the wire,make green light on, and clean the lens ，problem solved 。 bow with respect 。 Amituofo
Awesome! Glad it was helpful!
Thank you so much for explaining and showing so clearly in a way I could understand. Because of you I can close my garage door. No more flickering lights and an easy close
Well-done and helpful video! I've had to adjust the sensors on occasion when they had been bumped and misaligned, but was stumped when the door would open but not go down more than a couple of inches. After viewing your video I looked more closely at the wire connections to the sensors and discovered that 1 wire had come slightly loose but it was not readily apparent upon a casual visual inspection. After reconnecting it, the sensor lights came back on and the door closes properly again. I appreciate you taking the time to share your knowledge so that others can benefit from it. And your explanations and visual examples were clear and easy to follow. Thanks!
You saved my sanity I was about to rip the door apart … Senses weren’t lined up thank you so much you guys are awesome
You are very welcome! Really glad to hear you liked it. Thanks a lot for the feedback!
Oh my gosh, I’m 70 years old, single female and I repaired my garage door by watching your video on the sensors!!! I can get a repairman job now! 😀😂 Thank you!!!
Thanks to you, I fixed my garage door opener all by myself. There was a broken wire, which I fixed. I appreciate your clear instructions.
Awesome! Glad it was helpful and you were able to get it fixed!
you look pretty Kathleen.
Omg thank you so much! As a woman living alone i pretty much know nothing and you helped me fix this right away!
Hey, this video was so helpful. Your another garage door video was also awesome !! My garage door wasn’t closing down and i was always forcing it to close manually by pulling via handle. All other videos talked only about sensors and mine sensors were absolutely fine. All i did was adjusted closing, opening settings and increased closing force which you mentioned in your another video. Finally i was able to fix my long problem of my garage door !!! Big thanks to you, i am myself a youtuber but honestly you are doing such a great job !!! I am your new fan !!
Awesome! I am glad one of the two videos helped you! Thank you very much for the feedback!
Thank you for this great video! Just "fixed" the garage door that had been aggravating me for months!
Thanks! Your video saved the day. We had garage door problems like the ones in this video. I followed the advice and resolved the issue. Without this video I would have called a repairman. Thank you again!
Awesome! Glad it was helpful and you were able to save the money! Always appreciate hearing this! Thank you for the feedback!
@@HowToHomeDIY fgggghytyyuuuuhdhfhf
@@HowToHomeDIY jifjffkkffkgkgkykgkgkggk
Thank you! You just saved me a bunch of money. I wiped off the sensor and it worked. I am a widow on a fixed income and can’t afford much.
You're a life saver. I was able to fix my garage door all nyself with your video. Thank You 🙏🏽
Awesome! Really glad to hear that it was helpful for you! Thanks a lot for the feedback!
Awesome!! Thanks for sharing 👍
Me too! Thank you! House is less than two weeks old. Loose wire. I squeeze and twisted the connection a couple of times and it works.
Thanks. I needed the reminder. Realigned one sensor.
This helped me out!!!!! I can't believe this worked!!!! You are out here saving lives.
Haha Awesome! Really glad to hear that it helped you out. Thanks for the feedback!
Also if you have direct sunlight hitting one of the beams, that will cause your door to not shut! I just found this out with my door! I put a piece of cardboard near the sensor to shade it, and it works perfect now. That sun would hit that beam every year in the month of February, just at the right angle to interfere with the electric beam!
Excellent tip! While it is rare, it definitely does happen. Glad you figured that out. I have heard from a couple others with the same situation. In a couple of weeks the angle of the sun will be different and the issue will magically go away haha. Thanks for the feedback and that extra tip for folks!
This also happens to mine!!! Morning sun… I will try the cardboard for shade!!
Very true had the exact same issue. Even if the sensors are perfectly aligned, the sun can interfere at the right angle. I deal with it all summer long……except at night of course. Cardboard works great for blocking.
Yup, I made shade hood's with large heat shrinkable tube
Where did you put the cardboard?
It indeed was the sensor thank you, sir! You’re out here saving lives.
Thank you very much. After watching your video, it took about 2 minutes to fix the problem. Thank you for sparing me an expensive service call.
Clueless Homeowner
Awesome, you are very welcome! Really glad to hear that it helped and saved you money. Thank you for the feedback!
YOU JUST SAVED ME TONS OF MONEY -- It was the sensors! Thank You!
Another success story! Thanks so much for sharing this video with us. Fixed the issue in a matter of a few mins.
Ps - you gained a new sub! Thanks again!
Hey man, a thousand thanks to you! We were about to call a garage specialist. You saved us lot of money.
Life changer. You just saved me $200+. Thank you 😊
YOU just saved me a load of money! One of the sensors was turned a different direction. Thank you
Awesome! You are very welcome! Really glad to hear it was helpful for you. Thanks a lot for the feedback!
Thanks you.. I just fixed my garage door based on your instructions. once again thank you.
You are very welcome. I am glad it was helpful!
You saved my day and money, it was sensors not pointing each other and definitely some cleaning activity would have disrupted. Thanks a ton!
Thank you! I didn’t even know there were “lights” on my sensors. It made it very easy to figure out the issue
You are welcome! I am glad that it made it easier! Thank you for the feedback.
Thank you so much! I had the blinking red light and once I cleaned the censors it was working again! You do not know how valuable you are! #singlefemalehomeowner
Thanks a ton...it helped me and my blood pressure was in control 😅
😄You are very welcome! I am glad it was helpful. Thank you for the feedback!
You saved me a lot of money. I didn’t notice one of the sensors had a tiny obstruction. One quick wipe and all good. Thanks.
This was excellent, I was having the same exact issue. I did check all items you mention. All was good but it woudnt work! I unplugged it for 1 hr then plugged it back in and it worked like a charm! So if others are in similar situation like mine it helps to unplug for a while for the it to rest. Nonetheless excellent info here
Thanks for the added tip!
How do you unplug it please ?
Thank you! I couldn’t figure out what was going on - checked the wiring after your video, and a small wire had come out of the wire nut! I was vacuuming in that area last night and must have bumped the wiring. Great video 🙏🏼
Awesome! Glad you were able to get it fixed! Thanks for the feedback!
Thank you for sharing this! Microfiber cloth worked like a charm. Over the course of 8 years, I've left the garage door open while doing yard work and here in Arizona you blow a lot of debris from the desert landscaping. Finally caught up to the sensors I guess. $$ saved.
Hey Carla, really glad to hear you were able to save your money! I can only imagine how much debris blows around out in desert terrain. Thanks for your feedback, I am glad it was helpful!
My garage door won't close and I found your video, which is not too long. I followed your instruction and it worked. My problem is the dirty lenses. Thank you soooooo much!
Awesome! Really glad to hear it helped! Thanks a lot for the feedback!
So happy I took the time to research this issue, my garage has been doing this for about two months, I checked and it was the wires not tightly connected so no light was on one of them. Plus mine don’t have the cap they just have tape. Super easy fix, just wished I would’ve UA-camd sooner. Good stuff here! #singlemomhandylady
Awesome! Really glad to hear it was able to help you. Good job!
Thank you so much. I was having problems with ours. I noticed one of the sensors was flickering. Moved it up and is now working!! Thank you again
This was sooo helpful! I almost panicked when my door wouldn't close. Thank you!
You're very welcome! I am glad you found it helpful. Thank you very much for the feedback!
Mee too I was like 🤦♂️so I heard lots of dyi on you tube , I was able to fix without calling maintenance for the property I am renting
Thank you for valuable video, my garage door was the first thing you addressed
Sensor was dislocated and you saved me good amount of money
Keep up the good work brother
You are very welcome! I am really glad you liked it and it was able to help you. Thank you very much for the feedback!
That was a big help I just fixed it and under a minute. Thank you brother and may God bless you always :-)
Excellent! You are very welcome. Really glad to hear it helped! Thanks a lot for the feedback and God bless you too Cliff!
Thank you, Adam! I adjusted my sensors this morning and the door is closing now. You rock!
Awesome! Glad it helped. Thanks a lot for the feedback!
Thank you for a clear explanation of potential problems. You got right to the point. Great!
You are very welcome! Glad you enjoyed it!
Nice! Rightly predicted a loose wire after using the leaf blower in the garage. Sensor was not turning the green light on. I was able to re-adjust and put back into operation. Thanks!
Thank you so much! I just fixed my garage door based on your instructions ❤️❤️
You are very welcome! I am glad it was able to help you! Thank you for the feedback!
Thank you for your video.
My garage door will not come down. My husband manually pulled it down for tonight so we will follow your advice tomorrow.
You are welcome! I hope you were able to get it fixed. Thank you for the feedback!
Thank you very much
This just saved me at least $100! Thank you!!! I'm out of work at the moment so $100 is a big deal at the moment!!
Thank you man! You are an absolute legend and a massive help!
You are very welcome! Really glad to hear you liked it! Thanks a lot for the feedback!
Thank you for this very clear explanation. It's COLD out there and I need to get the door DOWN - ASAP. Thank you for your help!!!!!
You totally fixed my garage door! It was the sensors 🤣 you’re awesome, liked and subscribed ;)
Oh awesome! I am really glad to hear it was helpful for you! Thank you for the feedback and also your kind words!
Dude, you saved the day! In the last few sentences of your video you said “9 out of 10 times it’s the sensors” and you were bang on! Thanks for saving $400!
Awesome! Really glad to hear it was helpful and saved ya some cash. Thanks a lot for the feedback!
You explained this perfectly! Thank you so much. I will certainly tell my friends!
You are very welcome. Really glad you liked it! Thanks a lot for the feedback!
شكرا لك جدا لقد انقذت حياتي 😂😂😂😂. كنت افكر في الغياب من عملي و الاتصال بشركة ال Garage repair. لكن عندما بحتث في الاسباب , وجدت المشكل انه هناك كيس لإعادة تدوير القنينات وضعه ابني جانب المجس. شكرا لك يا رجل يا طيب . حفظك الله ووالديكم و اولادكم ❤❤❤❤. من اعماق قلبي 😊
you just saved me from calling a tech, the sensor thing got mine going. the other issue you didn't mention was the emergency latch with a rope dangling is disengaged
Awesome! I am glad it was helpful! Yeah if that is disengaged it also wont work, you are right!
After having a garage repair man come twice already, and still having issues with my garage door, getting a conversion kit that was not cheap, and my door still not closing, I finally found the issue. Thank you 🙏🏼
What was issue?
ALSO! The lock button may have been accidentally pressed. This just happened. The receiver was green and red, wires looked fine but the sender was completely off. Then I clicked the lock button and went right down
Thanks for this note. Pressing the lock button worked. Garage door closed after pressing it
Where is the lock button
@@danielfortonforton223 Right next to the button to open the garage door. Mine was right below it. It has a picture of a lock
Thank you for your comment. This is EXACTLY what was wrong with ours. Saved us from looking like fools to the garage door repair people.
Me too. Should be the first thing you check, even before the sensors.
This video was fantastic. Straight to showing what to do and how to do it. Thank you!
Happened to us this morning and I watched your video and got the garage door down 👍🏻
Great! I am glad one of the fixes helped. Thank you for the feedback!
Hi ,
I was able to adjust my sensor after looking at you video and it worked . I was prepared to call a repairman . Female here - thank you sooo much !!
✅❤️✅
This was exactly my problem. Thank you! I had bumped the sensor with my motorcycle and bent the bracket therefore making an intermittent signal with the other sensor. I appreciate you!
Ok awesome! Glad it was helpful and you were able to get it fixed.
Thanks so much for this video, saved me a repair call. It was a sensor that got tilted upwards then had the metal framing blocking it. I had just had a delivery and the door was open, delivery person put the package inside the garage and must have knocked it. I just repositioned it and door works fine now. Thanks again!
Thanks a lot, I fixed my garage door.
Awesome! I’m glad this video was able to help! Thank you for the feedback.
Man you helped me out. It was baffling me why wont my door close. Looked at the sensors. I have no lights my sensors. But the one was just ever so slightly misaligned. 2 min. I fixed it. Thank you.
Awesome! Glad you were able to get it fixed yourself. Thank you for the feedback!
Thank you, my friend. I really appreciate it. Our garage door has not been working for the better part of a month and my dad refuses to fix it why I do not know so I decided to do it myself.
Thanks so much , your video just help me fix my garage door that won't close due to dirty lens of the sensors. Have a wonderful day and thank you.
Excellent! Really glad to hear it helped. Thanks a lot for the feedback!
The first issue he described, with blocking/misaligned sensors was exactly our cause!! Our green light was flickering due to a misalignment, but cleaning with a broom made the LED turn solid green. This completely fixed our garage door issue.
Thank you for this. My garage door wouldn’t close on the first button press for months. Finally it stopped closing altogether and I was so upset because I couldn’t get anyone to come out and take a look. Turns out because my home is a new construction and after settling a bit, the right sensor became misaligned by a few centimeters. I pushed it in place and the red light stopped flickering and my remotes worked again on the first push. Thank goodness! No more running in and out of the house to leave.
Awesome! Really glad to hear it was able to help you finally get that fixed! Thanks a lot for the feedback!
Outstanding job. Figured out in 2 seconds what was wrong after watching this video! Thanks.
This video actually helped me, thank you. My issue was with the sensors, I cleaned them multiple times, but i never paid attention that there were lights on them, fortunately i have 2 garage doors and was able to compare that there should be lights on the sensors, once i moved the sensors up and down the lights came back on ...i think this suggests they were out of alignment. This has been an ongoing issue for me for a while where the door works and then for no reason stops working...I have 1 more thing in my arsenole to check now.
Thank you for the great tutorial on main issue when the garage door is not closing.
Thank you for your video, I went through the checklist and the first part was my problem. Thanks for helping me save some money.
Awesome video, my red light was off and once I adjusted the sensor, BAM!!! all systems go.
Awesome! Really glad to hear you found it helpful! Thanks a lot for the feedback Brian!
My man, you are a rockstar. If you were near me id buy you lunch. Just as you said, one of the sensors was loose. I probably knocked it loose while sweeping. Thank you so much. Keep up the good work.
I had same symptoms intermittent and checked everything you shared to no avail. The fix ended up something thats easily overlooked: old grease on rails that caused wheels to get stuck. Rails should never have grease. After cleaning it up the doors worked perfect.
OMG thank you so much. I just fixed our garage. It does not go down all the way and we had this issue for months. We got a qoute to have it fixed and would have cost us 1200 for it to be fixed good thing we did not go with the guys estimate and had it fixed at the time. The sensor was blocked. Thank you so much!
Had the problem all winter. I thought it had something to do with the weather.
After watching the video, it took all of 10 seconds to fix. Thank you. 🙏🙏
Oh awesome! Sorry you didnt see it sooner. But glad it was able to help you out. Thanks a lot for the feedback!
Thanks so much. You saved me lots of time. I noticed the other sensor was blinking red while the other was okay. It turned out I just needed to clean the lens. Thanks!
Glad it helped! That is very common!