Best way to Tie on nocking points Nail Knot for archery!
Вставка
- Опубліковано 28 сер 2024
- How to tie a nail knot for your archery nocking points. This is my (Kramer) personal favorite way to nock arrows to my bowstring. It is simple and a great skill to learn! #ShatterproofArchery #Kramerammons #traditionalarchery #Recurvebows
Affiliate links were used in this description
“As an Amazon Associate, I earn from qualifying purchases.
”Thank you for your support
Pure genius. Been struggling with nocking points BUT no more. Thanks
What about the nocking points are you struggling with?
Welch ein Sehnengarn wird hier verwendet.....???
It's so rare to see one of these shorts that actually has a real tip
It's to the point that I don't know what to trust anymore 😅😅😅
Really? I've seen quite a few of them. I see them all the time.
Don’t forget to mention it doesn’t cut off a tells you to go to they’re page for the full video!
Brilliant, so simple, so elegant.
Have you looked into doing this like whipping? Basically make a bight and lay it along the line, then wrap around that bight. When you’re done put the working end of the line through the bight. You can then pull the tail of the bight tight to pull both ends of the line under the wraps.
That's what I was about to suggest but then saw you comment.
just cleaned off the glued up mess of my string and tied these knots. Massively cleaner, will see how long they stay in place but super easy to tie
Been wondering the best way to do this for my recurve to eliminate weight (brass nock points) in the middle of the string. Awesome!
Perfect timing! This is the best knowledge I’ve gained today!
Omg iv been struggling for 2 years !!! Thanks bro
What a great and quick tip! Will definitely use that, thanks Kramer!
Thanks that's best tied knock point I've seen yet
Thank you Sir, you really are amazing in what you do.
i have to serve my string just now and this video is a really good way to show an easier way to do this thanks kramer! good lookin out bud
We fishermen call that a “bobber stopper”. Great knot.
i use 2 strings, lay one where you want to wrap foming a sort of U, wrap tightly with the second one and pass the tip under the U, then pull the first string from the other end to pass the tip through the wrapping. Imo is faster
That's an excellent method because you don't have to 'dress' the knot while snugging it tight. It also helps if you put a bit of masking tape on both the end of the loop and its tag ends to hold it in pace so you focus on the whipping thread.
I also use the method in the video, but I use a 1" section of clear pen refill with 45º cuts on the ends, so you just stick the loose end down the centre then remove the tube. Anything hollow like a feather will do.
We use a loop, then wrap one strand around string, through the loop 6 to 8 turns and pull it tight. It is a bobber stop knot. No need for the Sharpie, it makes it harder!
Thanks for posting this video. I dont use a nail knot, but I might give it a try. I tend to like a bit of a more pronounced nock point, I double serve my knot so that it has a profile about that of a brass nock.
And when your string stretchs?
doing it with dental floss...make a loop, wrap the floss a few times around, put the end through the loop, pull on the part of the loop, and the floss end will get pulled under the wraps...when its far enough it just breaks off clean and will stay there forever:D
Came out great Kramer thanks
This helped so much. Thank you!
That was smart. Thank You Sir. 👍🏾🔥
Keep them coming. Need more trad bow content in my feed lol
Love this Guy 🎯🫡
Man all the fishing knots i use i can also use on my bow nice. Since mypro shop is full of money grabs and uneducated people i have to learn myself. So far i yave done way better on squaring my bow up
That is a simple and easy to tie nail knot. We us this knot in fly fishing to connect our fly line to our backing and or leaders
😮 That is awesome! Thanks
Sick and clean, my new go to..🤘
Your shorts just popped up in my feed 👍
It's so simple I thought it can't possibly work. But it does.
Dang, never seen that before! 🍻
That sharpie been through it son
Good one
Great info
Alternating overhand knots work too. The advantage is they stay where you put them.
Sharpie is not necessary. Lay a loop along the string and wrap toward the loop. Put the open end of the string through the loop and pull the knot under the wraps. Can easily make it more clean.
Thanks for sharing
Or just use a Nail Knot tool, or a stiff straw.
Either way..
Great Video
That would be awesome advice.....if only I was into archery!!
Looks naughty!
Historically they would place the line on top of the string, and then wrap around it while leaving a loop, then after tightening put the other end through the hoop, then pull both ends tight and pull the string that made the hoop slightly more so that where the hoop grabs the end is under, in the middle of the wrap. It is how they made tight string tool handles without any glue, held in by friction.
Need this on all trad strings !!!
Works betterif you attatch a needle to the end of the string to help get it through the loops and use either a drinking straw or a round stir stick or bamboo skewer instead of a sharpie so the knot will be easier to tighten
This makes me want to start shooting arrows. What caliber are these❓😜😂😭
In your opinion, what is the best serving and serving size? Thanks.
Do you need a specific type of rope or can you take some random string ?
What!!! Loop around finger pull finger out, string through loops
Same thing fir a slip bobber stop for fishing .... But do iton a cut piece of drinking straw
1 million Views 😎
Nice, but not sure about the burning bit.😂 I'd be worried the blwstring would get singed.
The Knotles knot is a fishing knot used to present a boily on a hair rig. It is a way of tying of the line on a hook using friction only leaving a loop at the hook and an end to go to the main line. This is not a knot-less knot It looks more like a knot known as a fisherman knot used to join to lines of equal size
A little piece of a straw is even easier!
I wish I would have seen this method before I tied the glob of string I’m using as a notch set.
You can use the same knot your fishing 🎣 slip bobber
Same knot works as a slip stop for slip bobbers in fishing. In case you forgot to put a pre-tied one first thing
Wow that’s the way I make a slip bobber knot without the sharpie
Well, if it’s only super smooth and super nice, I don’t wanna cause I’m looking for really smooth really nice
Just a fly fishing knot. Nail knot. Used all the time in trout fishing.
That's so old, my grandfather used it to tie his hooks onto a fishing line.
Aka bobber stop for all the fisherman out there 😂
Would the strands inside of paracord also work?
Dude, 👏
can someone explain to me? it looks like it barely protrudes i'm not sure how it could provide a real rest/stopping point for an arrow
That's called a Barrel Knot
Nah mate...it's actually called a Whipping Knot.
Should the arrow be perpendicular to the bowstring?
I would have taken a couple more wraps for more "bite".
That's the "barrel" knot used on Rosaries.
NAIL KNOT is the correct name ,using a smaller tube like a straw or brass tube , much easier
Where were you four years ago when I started doing this for my kids?
Genius
Bow hunting in oregon opens in a week
I'm going to try my nail knot tool that I use for fly fishing only because I don't have a Sharpie as dirty and nasty is that one🥺
Mrs. Doubtfire has entered the chat......🙄
Amigo buen día explícame la forma ma plática de fabrica un arco .tradicional 😅
Just loop it and pull the other end thru.
Nail knot in fishing
That is the nail knot. I was using that knot 40 years ago.
Well they make them in tubes i guess i was spoiled 😢sliding bobber is 1
I couldn't figure out why he's wrapping the string around a nail. If guess it's not a nail...
Nail knor
This is literally just like three Clovehitch is layered on top of each other
Just so you know, a knotless knot has it’s own name that has been used for years. Its called a hitch.
No it's knot.
What is serving material?
Nail knot
It’s the same knot for a slip bobber
what string do i need to use to do that :)
me new
Double half hitch
What are knocking points?
Snell knot
I’ve used brass knocking stops my whole life, what?
I will most certainly not take a lighter to my bowstring made of fishing line but thanks for the tip
why do you have a bowstring made of fishing line?
do you mean that you serve your bowstring with monofilament? The amount of heat required to melt the frayed ends of the nock serving material is very minimal.
I've tied my nocks on for decades, never had a problem. I dont use a nail knot, but I burn the ends of the nock serving the exact same way. Rotate the string so that the frayed ends are 90 degrees to the flame then slowly bring the flame to the ends until they melt then pinch them smooth. That smeared nylon capping the end is very resistant to being pulled back through and unraveling. Again, decades of use with no issues.
I'd honetly be more concerned about a brass nock getting over crimped and damaging the strring material than I would tying my own nock in the manner shown in the video
Barrel knot
Also known as a constrictor knot.
It's called a nail knot,they use this not in fly fishing to tie leader to fly line.
or a Timberline Hitch
This is not a timber hitch.
Half of a fisherman's knot
Just like a noose
Looks like a stop nott
😮
Careful with that flame or bo-😮ing.😢
Isn't that a constrictor knot ?
It's a Fisherman's Bend. The number of wraps is irrelevant, single, double, whatever. It's a bend, not a knot.
A waif would call it a knotless knot.
Why the SHARPE?