This works, and I think is as far as most people need to get if this is only for a school project. I am worried that all those voids on this mass, if this was larger then just a small facade, would create huge lag in the model. this is great for concepts though! Can't always be thinking about the production environment when planning this kind of stuff out
Thank you. As a BIM Tech, I am always looking for new methods to create buildings. Thank you so much for this video. Keep posting more videos like this.
Hi Mr. Balkan, I am agree with you. There is some points noted below. Working with huge project revit is much useful & easier then archicad. Setup of project is much easier in revit and also Documentation is easy but Archicad create document with beauty with some complications. It is little orthodox type working with layers in archicad. I am irritated particularly conceptual design in revit. Opening, grid, sheet, dimension etc are very easy in revit. I prefer both but 75% i used revit. Keep going.
Thanks for making this tutorial video. Went on course for content creation and these exercises help a lot with understanding how everything works. Great stuff
thank you for this but i had a hard time doing it on a non-square plane (a curved strip of plane) and i had to do it manually...it was very time consuming...omg
Thanks very much Balkan architect your videos are very simple and helpful I hope you can do a video about classic decoration cornices and thank you very much again
Why do I always fail at the 6:23 minute mark when following the tutorial? In Revit, I always get the warning 'None of the created elements are visible in Elevation: West View. You may want to check the active view, its Parameters, and Visibility settings.' even though I have turned everything on :((
For on site construction of this facade we need to provide detail of each and every member. Can you please share how we can do so in your way, because my way was too long and quite A.CAD like.
You can make sections between each wooden panel, the sections will provide you with 2d views of each panel with the exact shape that you can export to autocad.
I was thinking this same question! But even if i have to cut a million sections of it, that’s still easier than figuring it out in AutoCad! Thanks so much for this!
I struggled immensely trying to get a void form to come through the façade wall to be able to use a door but I finally figured out a way that worked, though it took like an extra 15 minutes. This was a very cool design. I was just getting frustrated with the windows and doors
@@robertagiosanu1337 so what I ended up having to do was go back in and edit the void forms. I edited the void forms to where I had a solid piece again and then I could create a new void form there to have my doors/and or windows
Hello designers, I like to caution you about using form for from sake. In the real world, this type of design or wild patterns will be rejected by owner or builders, who are paying for the project. It's not because of the aesthetics but functionality. These undulating forms will likely to collect debris, trash blown by winds.sand and snow. Its is very difficult to build and maintain. As external concept, like many parametric exterior designs, fun to look at but very expansive to build.
Thanks for the video, it was great! I only have one question: is there a way to generate these wooden parts individually in view so that it's able to be cut the same way in real life?
Thank you very much for your contribution man. I was just curious how we would know the dimensions of each wooden part after designing using this method. It comes in a mess. how do we calculate it and place an order with the carpenter?
Your videos are very useful for Revit designers.Thank you so much.It is not showing in Vray rendering. How can be visible mass family in vray rendering
the coolest channel for revit tutorials. i learned revit because of this channel. thanks!
Without doubt these are the best tutorials I have ever come across
I'm a beginner and at first i thought was complicated to make it, now by your tutorial a can keep practicing. Thank you so much!
Thank you so much for tutorials like this, it helps a lot in my academic works. Keep up the good work!
Nos has salvado, estamos agradecidos
I’m really learning lot from you sir
i really liked every single videos you creating for us thank you for being in my life
This video was extremely helpful for a ceiling I'm designing -- thank you !!
Лучший💪💪 Уже третий день смотрю. Без лишних слов) коротко и ясно) +отличный контент👍👍👍
Thank You for your tutorials Mr Balkan
This works, and I think is as far as most people need to get if this is only for a school project. I am worried that all those voids on this mass, if this was larger then just a small facade, would create huge lag in the model. this is great for concepts though! Can't always be thinking about the production environment when planning this kind of stuff out
Thank you. As a BIM Tech, I am always looking for new methods to create buildings. Thank you so much for this video. Keep posting more videos like this.
Thank You soo much for uploading such tutorials. Its very easy for us to learn Revit from your videos.
This method is very similar to your creating curtains tutorial. Great work! Very easy to follow!
Thank you for your demonstration, it helps my school project in creating a high-rise building with that special wave facade.
Hi Mr. Balkan,
I am agree with you.
There is some points noted below.
Working with huge project revit is much useful & easier then archicad.
Setup of project is much easier in revit and also Documentation is easy but Archicad create document with beauty with some complications.
It is little orthodox type working with layers in archicad.
I am irritated particularly conceptual design in revit.
Opening, grid, sheet, dimension etc are very easy in revit.
I prefer both but 75% i used revit.
Keep going.
Thank you so much! You just save me and my final project! I truly appreciate it!
Thanks for making this tutorial video.
Went on course for content creation and these exercises help a lot with understanding how everything works.
Great stuff
I have been looking for such a tutorial since forever! Thank you Balkan!
I rarely leave comments on videos. But, this channel is quite amazing. Thanks Balkan.
This is just amazing a tutorial, thank you so much! Looks like you've got a new Patreon altogether. Bless you!
Thank you for your contributions to the craft and the profession, you are a great mentor! From Long Beach California we appreciate your sharing.
best channel for revit tutorials!
.. how many times .should i thank ..you ...sir ...
as i already told .... u solve all my problems and queries ... thankyou so much for guiding us ....
Wow! Thank you sir im learning revit and this seems doable now hopefully thanks to you!
Thank You Balkan Architects For Giving Us Such a Good Procedure Thank You Soooo Much
Bravo on this tutorial! I have learned a lot from these. Keep up the good work!
thank you for this but i had a hard time doing it on a non-square plane (a curved strip of plane) and i had to do it manually...it was very time consuming...omg
Great facade, easy steps
Thank you Balkan
I'm completely in love with your tutorials you're awesome thanks
gracias por compartir todo lo que sabes, tus vídeos son excelentes y me ayudan mucho en la escuela, estoy muy agradecida de que compartas lo que sabes
You are the Best Balkan... Awesome tutorial...you help me daily 😍😍😍 Love your work man.Bless up
The great Balkan Architect, please can you do a spiral or twisted column(round) like that of a rope. Definitely great job as usual
You smart! I wouldn't even tried it somewhere else than rhino. Thanks a lot.
Nice tutorial.
Thanks very much Balkan architect your videos are very simple and helpful I hope you can do a video about classic decoration cornices and thank you very much again
Amazing! Very useful channel. Thank you alot!
Bravo momak
Do a video on Chinese roof tiles or roofing sheets with ridge cap.
Great video. Keep it up.
wow. that is really incredible. now how in the crap would anyone build that. easy to do on the computer.
So amazing tutorial. Thanks.
Thank You!
Cool videos bro. Thank you for that!!!
Thank you for sharing. Ti si master
Keep going it's so helpful
Thank you
What about a curtain wall following the form and making a void behind the form so the curtain wall profile doesn't cut in the building
muito bom, por mais que falemos línguas diferente sua explicação consegue ser clara. parabens
Thank you sir. You are awesome!
Me ayudó mucho! Muy buen tutorial!! Muchas graciaaas
Very nice Thank you
Thank you so much for this video !!! It's really helpfull
Thank you very much
you are awesome as always. I'd suggest you a video about point cloud, when you can do it, please
Лучший канал
thank you so much!!!
THANKS
awesome, done
Predobro!
Thank you
Thank you for this amazing tutorial... Can you plzzzz tell me how to do this kind of a walls but on a curved wall plzz
Is it possible to do a tutorial of this in a circular building ? It's so tricky :(
Excellent, thank you 😍💯
this is great !
My favorite Channel !! (Y)
thank you!! you are amazing :)
Thanks bro
This is amazing🏆... Thank you so much
u're a Genius !!
This is great to build a cool courtyard hahaha
Why do I always fail at the 6:23 minute mark when following the tutorial? In Revit, I always get the warning 'None of the created elements are visible in Elevation: West View. You may want to check the active view, its Parameters, and Visibility settings.' even though I have turned everything on :((
Хороший урок - коротко и ясно!
For on site construction of this facade we need to provide detail of each and every member. Can you please share how we can do so in your way, because my way was too long and quite A.CAD like.
Can you answer this question for me too?
You can make sections between each wooden panel, the sections will provide you with 2d views of each panel with the exact shape that you can export to autocad.
+1 Same issue I ran into. Schedules and production are far more important to us than rendering. Excellent tutorial, either way!
I was thinking this same question! But even if i have to cut a million sections of it, that’s still easier than figuring it out in AutoCad! Thanks so much for this!
Very good
Great balkan.
Hi mate
Waiting for some basic classes
Or a complete house just in revit
When ur using some autocad drawing its a kind of confusing
Thanks Erfan
Amazing
awesome 😮😮
thanks!
Perfect 👌🏽
Спасибо вам!
I struggled immensely trying to get a void form to come through the façade wall to be able to use a door but I finally figured out a way that worked, though it took like an extra 15 minutes. This was a very cool design. I was just getting frustrated with the windows and doors
I have been trying to figure out how to do this, may you please tell me how you go it to work for you?
@@robertagiosanu1337 so what I ended up having to do was go back in and edit the void forms. I edited the void forms to where I had a solid piece again and then I could create a new void form there to have my doors/and or windows
Hello designers, I like to caution you about using form for from sake.
In the real world, this type of design or wild patterns will be rejected by owner or builders, who are paying for the project.
It's not because of the aesthetics but functionality. These undulating forms will likely to collect debris, trash blown by winds.sand and snow.
Its is very difficult to build and maintain. As external concept, like many parametric exterior designs, fun to look at but very expansive to build.
this is amazinggggg
bro i shiddid me pants watching this tut
\
|
|
dud me shartted and peed too
Hey! Nice video :-) About the copy proccess at 7:15, I`d rather use array (shortcut AR) Any thougts about that? Keep up the good work!!
Amazing!
ERES UN GENIO
Thanks for the video, it was great! I only have one question: is there a way to generate these wooden parts individually in view so that it's able to be cut the same way in real life?
awesome
Thank you !!!
waah Creizyy😍
oh wow its wondeflllllllllll😇
Could you do a tutorial on how to create those "cool looking" geometric parametric wall panels.
perfect....
Awesome.. Thanks for sharing.
Nice
king
Thanks for video. Can you provide video that shows how can we export each member to laser cut process for physical model ?
Hi, thanks for this tutorial video.
but, do you have a tutorial video about wave facade in revit for all around the building (including the corners)?
Thank you very much for your contribution man. I was just curious how we would know the dimensions of each wooden part after designing using this method. It comes in a mess. how do we calculate it and place an order with the carpenter?
An answer here would be much appreciated!
Your videos are very useful for Revit designers.Thank you so much.It is not showing in Vray rendering. How can be visible mass family
in vray rendering