Im in my final year of architecture and i have to say i have learnt 90 percent of what i know in revit from you, thankful for your channel for your existence balkan architect!
Actually we did it (this building have done by my company) in rhino and Archicad. And what you did even closely not the same as it have been done. If you want see real model of this building. Let me know.
Yes it is pretty hard to achieve with a none nurbs/mesh modeller. Have a look at the Archicad "try" if you like: ua-cam.com/video/_CufugKxb4E/v-deo.html
Cool - didn't realise you were involved with this project, small world! Rhino is a great choice for this, I guess if it had to be in Revit then Rhino Inside and adaptives could do it now. I assume you achieved the roof form as a rollform and the ceiling in separate panels?
@Aussie BIM Guru That's right. the idea is was to create as many as we can same panels (same size) for the gold part. As you understand if we will have a lot of panel types, it will have a high cost for the client. We used Rhino+Grasshopper to create this network and achieved a pretty good result, in the end, we have only a few types of panels.
Yes, exactly, its shouldnt be same. But still the point of Balkan architects video was not to show that ''building is simple and modelled perfectly or precisely in Revit''. cuz he did it in a short period of time just to show basics for modelling such things. a real project for client etc. would include giving more time and finetuning every corner or detail . Thus, yess its also a matter of spending time and making finetunes as u said for the size of gold panels by grasshopper and rhino. By the way, its great that u did it, I knew ur channel but I didnt know u were associated with it. Great work :)) It would be great to see real model of that building in ur channel as a tutorial :)
Hihi, one quick fix for your problem with the intersecting roofs is to set one roof to be on top of the face and the gold one to be on bottom of its face. Good luck
Hi....can you please help on cut void videos on generic model(found in Model in place).....revit does not allow me to cut the void....( i tried to select the void then model nit it does not work)...
Do you have courses on building families? I work for an electrical engineer and I enjoy seeing my boss get giddy when I customize light fixtures and make them look like the lights we are spec'ing.
This is really cool!! I can't make roof though, I've tried changing to thinner generic one or any other one but it just doesn't work on my model... :( I really want this to work so I can apply material to the wavy roof. Is there any other way to check where my model went wrong?
Hi every one if anyone knows this problem. kindly help me. Using Revit & Vray . while rendering in vray there is another model attached to the original one in the background.
Every university professors just tells the students to come watch his videos when it comes to creating something as good what Balkan Architecture does Edit: they also recommend his teachings courses because they know he is more advanced when working with complex design.
Im in my final year of architecture and i have to say i have learnt 90 percent of what i know in revit from you, thankful for your channel for your existence balkan architect!
very nice man. what a simple and creative way to use the tools. thank you for all your tutorials
Believe me never stop I am the first supporter for you thank you very much🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
ajme urnebesan si. hvala na svemu, spasio si mi skolovanje!
Looks like Revit ended up trolling us instead of Archicad being trolled this time around.
Thank you for this tutorial , i have made it also and rendered it in Lumion too , its looking awesome in Lumion rendered Image
love all your videos thank you so much
I LOVE YOU AND YOUR WORK BALKAN
the best Chanel that i ever subscribe in love with your method 👏👏
I really appreciate your tutorial.....because every time learning new tricks....thank you so much
Nice and beautiful design
Powerfull video
Thank you for sharing and teaching these awesome works.
wish i could like this vid twice just for trolling archicad 🤣
Actually we did it (this building have done by my company) in rhino and Archicad. And what you did even closely not the same as it have been done. If you want see real model of this building. Let me know.
Yes it is pretty hard to achieve with a none nurbs/mesh modeller. Have a look at the Archicad "try" if you like: ua-cam.com/video/_CufugKxb4E/v-deo.html
Cool - didn't realise you were involved with this project, small world! Rhino is a great choice for this, I guess if it had to be in Revit then Rhino Inside and adaptives could do it now. I assume you achieved the roof form as a rollform and the ceiling in separate panels?
@Aussie BIM Guru That's right. the idea is was to create as many as we can same panels (same size) for the gold part. As you understand if we will have a lot of panel types, it will have a high cost for the client.
We used Rhino+Grasshopper to create this network and achieved a pretty good result, in the end, we have only a few types of panels.
yes man .we need to see it .please post the video .i like your videos on grasshopper.
Yes, exactly, its shouldnt be same. But still the point of Balkan architects video was not to show that ''building is simple and modelled perfectly or precisely in Revit''. cuz he did it in a short period of time just to show basics for modelling such things. a real project for client etc. would include giving more time and finetuning every corner or detail . Thus, yess its also a matter of spending time and making finetunes as u said for the size of gold panels by grasshopper and rhino.
By the way, its great that u did it, I knew ur channel but I didnt know u were associated with it. Great work :)) It would be great to see real model of that building in ur channel as a tutorial :)
Hihi, one quick fix for your problem with the intersecting roofs is to set one roof to be on top of the face and the gold one to be on bottom of its face. Good luck
You are amazing thank you so much 🙏🏻
Good job 👏!
your channel is amazing channel
Great video thanks! 👍
So you are amazing because you tech a lot of lesson in Revit
you always know when we were stuck
Ok Switched the roof type it kind of works out now 🥵🥵
you amazing congrat....
Saw the thumbnail, saw who uploaded it, immediately starts laughing
My boss hated revit and avoided it like covid with a passion 🥲
great sir
THANK YOU !!!
How to create an trapezoidal balcony with top one end stretched upward. Tried many times but didn't get the idea. Plz do an tutorial for this.
thank you so much
It won´t let me make roof in any of the faces, any Ideas?
Can I know, why I cant select the upper part of mass to create roof?
Hi....can you please help on cut void videos on generic model(found in Model in place).....revit does not allow me to cut the void....( i tried to select the void then model nit it does not work)...
very good tank you bro
Thanks for the great content, I have a question how can I make night rendering and switch on the lights in Revit LT, many thanks
Hey! Why don’t you make videos on highlighting the maximum potential of Revit LT.
"Hello Engineer, good time. I urgently need this project for my student work. Could you please send the review file? Thank you."
I tried this video , the edge wasn't selecting, any help?
I can't select mass faces to create roof. Help pls
How do you put lights?
Love from India
Do you have courses on building families? I work for an electrical engineer and I enjoy seeing my boss get giddy when I customize light fixtures and make them look like the lights we are spec'ing.
Hi, was wondering if someone could help me . When I select wall or any other object in Revit it won't turn blue. Thanks in advance.
Wow, I'm interested do you have multi storey buildings in your coarse Thanks
This is really cool!! I can't make roof though, I've tried changing to thinner generic one or any other one but it just doesn't work on my model... :( I really want this to work so I can apply material to the wavy roof. Is there any other way to check where my model went wrong?
I have the same problem, did you find a solution?
Hi every one if anyone knows this problem. kindly help me. Using Revit & Vray . while rendering in vray there is another model attached to the original one in the background.
Everything perfect until I hit create roof and it’s comes ERROR 🤬🤬🤬anyone has the same
Problem at the end ??
yes
Is this project file available? Not seeing it on the Patreon
Yes, it's now up on patreon, sorry for the delay :)
Every university professors just tells the students to come watch his videos when it comes to creating something as good what Balkan Architecture does
Edit: they also recommend his teachings courses because they know he is more advanced when working with complex design.
👍❤️🔥
👌👌👌👌👌
Oh no can't turn the mass into a roof helpp
Please you have removed the Massing for beginners on your site ....
This is the course on massing: balkan-architect.teachable.com/p/advanced-modeling-in-revit-conceptual-massing-course
i thought vsauce had an architecture channel
the 18 dislikes are from archicad users
but why?
hahaha that is archicad icon building right??
i think revit work flow quicker easier
What if the walls were cylindrical
How do you cut it
So its no protruding through the roof
You ARE NOT BIASED!!! ))))))))))))))))))))
牛
The Host is very very slow, imposible to work !
thank you very much