CNC automated edge finding / zeroing with touch plate
Вставка
- Опубліковано 5 лип 2016
- New feature in Estlcam 9.004: Automated edge finding with a touch plate.
It is a simple and precise method to find workpiece zero without expensive probes and also works with non-conductive workpieces like wood. - Наука та технологія
You sir are a genius. You have produced very interesting software with remarkable features such as this for a home mill.
as an hobbyist your videos are precious source,thanks.
Great feature, how does it runs? I mean this is saved together with the gcode generated by Estlcam? I run the code in Repetier host, so this zeroing findings will run under the Repetier?
Nice video sir, do you sale that jig working on stefcraft?
Nice!
Hi Christian, I wonder if this automated edge finding can be used in a MPCNC using Ramps on MKS Gen L? I could not find a way to make it work. is there any guide to do it?
Ist es mit Estlcam auch möglich einen Innendurchmesser oder einen Aussendurchmesser anzutasten? So dass der Nullpunkt dann im Zentrum des Kreises liegt. Das wäre für zylindrische Werkstücke sehr praktisch.
Very nice feature Christian! does it always perform a 3 point measurement on X/Y or only when the block is tilted?
Only when the "Measure angle deviation" checkbox is checked.
hi, are the plans of the touch plate available for download?
keep up the good work
Hi Christian, When I run the touch plate sequence auto touch off X, Y, Z it touches off the Z but then the x travels all the way to the limit on the X axis (even the full 1.5 meters) in your video it only moves 20mm-30mm how can I change this I can not see a parameter anywhere, thanks!
What controller is used with this? Grbl?
i have sample cnc shield v3 with arduino uno where i can connect the probe ? and other question i wan6t buy your programs is very nice but when i chance my grbl 1.1 firm with your program my z axis steper start make noise and go hot without my machine do anything
Hallo!
Genial!!!
Bitte um Info wie man die Tastplatte mit dem Arduino(Pinbelegung) verbindet.
Vielen Dank!
Geiles Teil,hab ich nun endlich auch...75x75x10...
hi can you show us new eastlcam9 3d double side function?
okay und welche ist die steifere mit der der alublock gefräst wurde oder womit du die aluteile in deinen anderen videos gefräst hasst
Habe ich da etwas verpasst? Woher kennt das Programm die Kantenlängen des Werkstücks, wenn es nur die Ausrichtung ermittelt hat? Ist diese vorher im Programm eingegeben worden?
Die Kantenlänge der Werkstücks spielt für den Zweck keine Rolle.
Die Abmessungen des Tastklotzes sind allerdings in der Software einstellbar.
Where is this program available ??
How do you set this up
Where can I get the plate and software?
Is this usable on linuxcnc?
how can i set this up with the Ramps board / arduino ? your work is awesome will be buying a licence shortly.
Probe input is connected to Aux4 / Pin 17 on the ramps board.
But I highly recommend to use Arduino UNO or Nano instead of Ramps because the Ramps compatible Estlcam firmware has some limitations.
Do you have some list of these limitations?
also just paid for a licence :)
purchased the license around a month ago and never received the license back from you.
I'm just going through my emails to see again if I've missed it and I'll also double check my paypal to ensure that payment went through. I'll let you know the results of my looking tonight ( or tomorrow )
found licence key, was in spam folder.
thank you. will be really great to get rid of the register message.
thank you
Hallo was für eine Fräse nutzt du?
lg
Das im Video ist eine Shapeoko 3
Der Tastblock wurde allerdings mit einer deutlich steiferen Eigenbaufräse hergestellt.
so wie ich das auf unseren Industriellen Maschinen kenne, ist es so, dass man zwingend zuerst die Rotation und dann die Position einmessen muss, warum ist es hier anders herum?
Intern wird tatsächlich zuerst der Winkel berechnet und dann der Nullpunkt.
Die mathematische Voraussetzung zur Berechnung von sowohl Winkel als auch Nullpunkt ist 3 seitliche Punkte zu haben. In welcher Reihenfolge die Punkte gemessen werden ist dabei egal, denn erst wenn alle 3 vorliegen kann man beide Werte ermitteln.
Allerdings kann man das als Programmierer natürlich sehr unterschiedlich umsetzen:
Bei mir ist es so, dass alle 3 Punkte direkt hintereinander gemessen werden und zuerst die beiden Punkte drankommen die bei einem korrekt ausgerichteten Werkstück ausreichen würden den Nullpunkt zu bestimmen. Die Reihenfolge spielt dabei wie gesagt eigentlich keine Rolle, da bei Nullpunkt + Winkel ohnehin erst ab dem 3. Punkt gerechnet wird. Allerdings kann ich in dem Fall eben auch schon nach dem 2. Punkt aufhören wenn nur der Nullpunkt gewünscht wird.
Man kann aber natürlich auch erst einmal getrennt den Winkel bestimmen und dann nochmal getrennt den Nullpunkt. Je nach dem ob sich das Programm dabei die vorherigen Punkte merkt müssen dann bestimmte Vorgehensweisen strikt eingehalten werden oder nicht.
Im Endeffekt ist es also nur eine Frage der jeweiligen Umsetzung - die Mathematik dahinter ist letztenendes diesselbe.
Fantastic!
We can test Estlcam for free...but for how long?
Für eine ganze Weile lang - spätestens, wenn Dir die dann auftretenden Wartezeiten zu Viel werden, solltest Du dieses Stück Software honorieren und Dir die Vollversion leisten - Die genau den gleichen Funktionsumfang hat - nur dann ohne Wartezeiten.
Anyone know how I can do this with linuxcnc ??
So what about the software ?
How does this connect to Estlcam/arduino?
The touch plate is directly connected to the Arduinos probe input and the tool is directly connected to Arduino GND.
There are no additional components required.
I have an standard mpcnc with arduinoMega/ramps. Can´t find a spot for the probe - is it on the ramps? (sorry for the noob question)
@@joakimscholdberg8700 I want to know this too. What probe input?
Hello friends, one question:
Somebody knows how add COMMAND G38.2 to Marlin?
I was read about here:
github.com/MarlinFirmware/Marlin/issues/7972
but I'm not sure how install.
I wanna use Cycle Homming and the COMMAND G38.2 for Z probe.
I'm not a programmer but I wanna use the code in Marli for CNC Machine.
Thank you for you reply.
It would be great if you responded to your emails...