You fixed our Dyson!!!!! Thank you so much!!!!! My sister took it in and they said it was the transmission……… it was not!!!! The hose going into the head was clogged!!!! Thank you 🙏🏻 thank you 🙏🏻 thank you!!!!
¹My sister is always clogging her vacuums.Now she has a Dyson they didn't even make back when I owned a vacuum cleaner sales and repair shop. I didn't have much patience yesterday to deal with it so your video really was useful to me.Apparently she had no knowledge of the existence of the filter inside the center of the dirt receptacle.She had assured me she checked the filter but she meant the one under the ball. The rubber and cloth one has never been cleaned in over 4 years. BTW, she has 6 cats, it was soon clogged up. Thank you sir!
Thank you for the breakdown. My wife was about to throw out our Dyson, and I followed your video and found that there was a rubber kids toy blocking the flow of air. So thank you again.
Beautiful. I never would have found the tiny straw brush blocking the hose/floor attachment switcher without you. Saved me buying a whole new vacuum…and it’s probably good to wash the filter, too, I guess.
Your video showed me how to remove the clip, so the cleaner head could be freed. I then found the pipe was totally blocked and after removing all that fluff, no surprise our Dyson worked again ! Thank you.
Thank you for posting, I was so frustrated. Accidentally sucked up half of a dry kleenex & lost suction completely! It was in the choke point in the wand. Now it’s working perfectly. So grateful. My tip is a few drops of essential oil in the washable filter makes the room smell great. I use pine or cedar or mint. Makes the house smell like I just cleaned. Mrs Z
I wasn't paying attention and the vacuum picked up a door stop the dog had gotten loose from the wall. THANK YOU! I was able to safely get it out. Thank you for sharing your genius!
Thanks for this video. There was a piece of plastic tubing preventing the hose/floor valve from working. As they say, "couldn't have done it without you". Blessings.
Thanks! Good tip on the changeover valve. Had a plastic spork stuck there that wasn’t allowing the suction to change over from the attachments to the floor head.
Great video, thanks for making it. I am having problems getting my hepa filter to slide to the unlock position. I don't want to apply too much force and damage the filter. Any ideas?
I've never had one get stuck, If removing the filter causes it to break it was mostly likely needing replace any way. Try it when the machine is cold and also warm after being run for a time.
Sometimes a customer will pick up a machine in July and we'll say "you haven't been sweeping since Christmas" because of pine needles. Talk about Christmas in July :-)
Thank you ! I was able to get the plastic cap my kitty plays with unstuck from the nozzle. I did not know the hose came apart like you showed in the video.
We have a sock lodged in the plastic wand. You looked at it 1st, mentioned that it was the tightest point. Does the top (colored piece) come a part from the wand? It looks about 1.5" into that piece, but isn't budging. Is it glued?
It may require you to disassemble the vacuum. Typically nonremovable filters last the life of the machine or are not supposed to get very dirty. In either case if a nonreloadable filter is blocking section you should take it to your local vacuum shop for service.
Check the change over valve (little hoses that switch back and forth between floor and tools). Also make sure the clear clean out door is not missing. If all else fails take it to your local vacuum repair shop!
Did you check inside the wand? Many times something gets stock in the wand towards the tip (that's the tightest point). If not it is most likely something inside the ball with the small hose that changes the suction over from the floor to the wand.
Dyson Ball is a pain and the ass to own. Always trying to figure out why the valve is tripped. What a pain in the ass. It is a frustrating vacuum to own.
You fixed our Dyson!!!!! Thank you so much!!!!! My sister took it in and they said it was the transmission……… it was not!!!! The hose going into the head was clogged!!!! Thank you 🙏🏻 thank you 🙏🏻 thank you!!!!
So glad we could help! Thank you for your business :)
¹My sister is always clogging her vacuums.Now she has a Dyson they didn't even make back when I owned a vacuum cleaner sales and repair shop. I didn't have much patience yesterday to deal with it so your video really was useful to me.Apparently she had no knowledge of the existence of the filter inside the center of the dirt receptacle.She had assured me she checked the filter but she meant the one under the ball. The rubber and cloth one has never been cleaned in over 4 years. BTW, she has 6 cats, it was soon clogged up. Thank you sir!
That's not uncommon actually. Her performance has been low for a long time.
Thank you for the breakdown. My wife was about to throw out our Dyson, and I followed your video and found that there was a rubber kids toy blocking the flow of air. So thank you again.
You are welcome!
Beautiful. I never would have found the tiny straw brush blocking the hose/floor attachment switcher without you. Saved me buying a whole new vacuum…and it’s probably good to wash the filter, too, I guess.
Glad I could help!
I never knew how my vacuum worked until now. Thank you.
Thank you! I had sucked up a latex glove thru the wand, but couldn't remove it until I watched this video. Saved us many headaches!
Glad you got it!
Your video showed me how to remove the clip, so the cleaner head could be freed. I then found the pipe was totally blocked and after removing all that fluff, no surprise our Dyson worked again ! Thank you.
Good deal.
Thank you for posting, I was so frustrated. Accidentally sucked up half of a dry kleenex & lost suction completely! It was in the choke point in the wand. Now it’s working perfectly. So grateful.
My tip is a few drops of essential oil in the washable filter makes the room smell great. I use pine or cedar or mint. Makes the house smell like I just cleaned.
Mrs Z
Thank you
The bottom part of the wand. That’s where my problem was.
Thank you very much for your very thorough tutorial!!!
Glad it helped!
I wasn't paying attention and the vacuum picked up a door stop the dog had gotten loose from the wall. THANK YOU! I was able to safely get it out. Thank you for sharing your genius!
That's Great!
Thanks, your information worked like a charm. The hose behind the head unit was plugged.
Dude! Very well done! We definitely owe you a beer!! Best of luck!!
Glad I could help out.
Great presentation easy to follow and logical. Fixed a blockage so many thanks your a great guy for sharing your knowledge so well.
Very welcome
Thanks for this video. There was a piece of plastic tubing preventing the hose/floor valve from working. As they say, "couldn't have done it without you". Blessings.
Glad I could help!
Good stuff, you snap those vacuums around, really helped with my question’s .
Glad I can help!
great informative video hence i sorted a blockage in my wandering hose. thanks
Great info, it definitely helped me unclog my vacuum.
Thanks! Good tip on the changeover valve. Had a plastic spork stuck there that wasn’t allowing the suction to change over from the attachments to the floor head.
Glad it helped
You helped me fix my problem! Thanks! It was the last one in the video of course. Followed all the steps tho. Awesome video.
Glad I could help
Thanks to you, fixed our Dyson!
Great to hear! Glad our video helped.
Actually was a easy fix with the help of this video!! Was stuck in the small part of the tip!
Great!
Thank you so much! I have a couple of different models, and Im looking forward to taking them apart to thoroughly clean them.
If you are cleaning the vacuum then who is the vacuum cleaner :-)
@@ClassicVacuum right?!!
Thank you! Very helpful! It's now fixed! 😊
Glad it helped!
Wow thank u sooo much I have been trying for over 1 week .
Glad I could help
Great video, thanks for making it. I am having problems getting my hepa filter to slide to the unlock position. I don't want to apply too much force and damage the filter. Any ideas?
I've never had one get stuck, If removing the filter causes it to break it was mostly likely needing replace any way. Try it when the machine is cold and also warm after being run for a time.
@@ClassicVacuum ty
Thank you for this video. Clear and informative !
Glad it was helpful!
Turns out it was pine needles and a branch in my case 😂 thank you for the helpful video!!!!
Sometimes a customer will pick up a machine in July and we'll say "you haven't been sweeping since Christmas" because of pine needles. Talk about Christmas in July :-)
Great easy instructions- thank you 🙏
You’re welcome 😊
This was so helpful! Thank you!
Glad it was helpful!
Thank you! You just saved us $400. Fixed the dyson, thought we were going to have to buy a new one! 😃
Excellent!
Thank you ! I was able to get the plastic cap my kitty plays with unstuck from the nozzle. I did not know the hose came apart like you showed in the video.
You're welcome :-)
thanks. this helped me unclog my wand.
Your Welcome!
We have a sock lodged in the plastic wand. You looked at it 1st, mentioned that it was the tightest point. Does the top (colored piece) come a part from the wand? It looks about 1.5" into that piece, but isn't budging. Is it glued?
No it is not supposed to come apart. It's most likely joined with ABS cement. I recommend getting a hook type tool, snag it and pull it out.
Great job there. You are a pro 👍
Thanks!
I folkowed ur instructions and it worked.
😆Thank you!!
You're welcome!
Thank you great video
You're welcome!
How do you clean behind that filter that you cannot remove?
It may require you to disassemble the vacuum. Typically nonremovable filters last the life of the machine or are not supposed to get very dirty. In either case if a nonreloadable filter is blocking section you should take it to your local vacuum shop for service.
Great video you cover it all! thank you
Awesome thanks for the comment!
It definitely helped!!!!
All fixed, thank you thank you thank you!
You are welcome!
I'm not getting suction on the ground and all hoses and head is clear i dont get it
Check the change over valve (little hoses that switch back and forth between floor and tools). Also make sure the clear clean out door is not missing. If all else fails take it to your local vacuum repair shop!
Thank you. I didn’t have to buy a new one. 😁
Glad I could help!
Thank you 🙏🏻
My hose is not clogged we took it off and nothing, have suction in floor not wand
Did you check inside the wand? Many times something gets stock in the wand towards the tip (that's the tightest point). If not it is most likely something inside the ball with the small hose that changes the suction over from the floor to the wand.
Thank you!!!!!!!❤
You are so welcome!
Dyson Ball is a pain and the ass to own. Always trying to figure out why the valve is tripped. What a pain in the ass. It is a frustrating vacuum to own.
We sell a lot of the SEBO Felix to Dyson Ball owners. 10 year warranty!
classicvac.com/sebo-felix-pemium-rosso
😱😱😢😱