Montana “Mini” Intruder Fly Tying Tutorial

Поділитися
Вставка
  • Опубліковано 8 вер 2024

КОМЕНТАРІ • 8

  • @seanmooney3907
    @seanmooney3907 9 років тому +1

    I think I am going to up size this just a little and go after bass with it. Flashy enough for Northern Maine Pike too but that would require serious upsizing. All the best and thanks for sharing. Sean

    • @HouseOfFly
      @HouseOfFly  9 років тому

      +Sean Mooney That sounds awesome Sean, let us know how well it works for you.

  • @lp7064
    @lp7064 7 років тому

    If I were to attach the trailing hook with the point up (to reduce snagging), would it mess up the action of the fly?

    • @HouseOfFly
      @HouseOfFly  7 років тому +1

      Hey Luke, hook direction is more personal preference but it should not affect the action of the fly. Let us know how it works for you.

  • @lesterma1608
    @lesterma1608 3 роки тому

    What makes a fly, an intruder fly?

    • @oak8728
      @oak8728 3 роки тому +1

      Good question, an intruder is short for intruding or intrusive to a fish as to solicit a strike. But the concept was brought in by Jerry French and Ed Ward as a trailer hook, to tie a large fly on a small hook. At the time if you wanted a large fly that meant you got a large ol hook. The other concept was to utilize two separate sections of the fly with a thin body between. This allowed the flu to cast easily during a time when synthetics and other non water holding hairs fly tyers were less aware of.
      Nowadays it’s a loose interpretation that stays relatively true to the “two station” or “two section” concept. Most will use a trailer hook but not all with advances in hooks.
      Cheers.

    • @lesterma1608
      @lesterma1608 3 роки тому

      @@oak8728 great explanation, thanks!