SCX24 - Drivetrain Clicking, Binding and Setting Mesh. Narrow it Down!!
Вставка
- Опубліковано 7 сер 2024
- The process of elimination that I go through to find binding or noise issues on the SCX24.
Purchasing from these links really helps support the channel!!
Parts In this video:
Metal Gearbox for SPGCM (Red): s.click.aliexpress.com/e/_ABps9N
McCue RC Ultra High Clearance Links with Behind the axle steering:
C10/JLU: ebay.us/IfI7gJ
Deadbolt/Betty: ebay.us/tpKmTN
Gladiator: ebay.us/XUyOJG
RC4WD Stamped Steel 1.0 Stock Beadlock Wheels (White) 4pcs: amzn.to/3viuIJh
Bench Gear:
Pro'sKit 900-015 Helping Hands Soldering Aid: amzn.to/3DkNkfx
Lifegoo Heat Insulation Silicone Repair Mat: amzn.to/3Luf44d
SCX24 Toolset: amzn.to/35mjXgh
ANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool: amzn.to/3u7Owjq
UNIWEIGH Gram Scale,200 gx0.01 g( 7.05 oz x 0.001 oz)Digital Pocket Scale: amzn.to/3u71oWT
Recording Gear:
Blue Yeti USB Mic: amzn.to/3J4Bnf4
Apple Lightning to USB3 Camera Adapter: amzn.to/3LvwaP6
Pasow USB A Male to A Female Extension Cable (50 Feet(15m)): amzn.to/3J4Bnf4
Camera Stand 1: Custom Built
Camera Stand 2: amzn.to/3wJszZH
Camera Stand 3: amzn.to/36wqwgZ Thanks a ton!
We also now have shirts and stuff! Find it all here: my-store-4267224.creator-spri... - Розваги
Thanks! Best video I've seen so far. Helped a lot
Thanks a ton, glad it helped. Be sure to sub, we have a TON of similar videos.
Great diagnosis procedure!!! I will have to look at the steering knuckles!!!👍👍👍 Subbed
Thanks! We are glad it could help.
Great pointers to look for. You helped me. Just subscribed and liked 👍
Awesome that the video helped!!!
That was it thanks a bunch I was banging my head against a wall wondering wtf!!! I was ready to buy new axles again and I had the nice ones already on it. Thanks again
Glad it could help you!!!
Thank you really informative and well made :)
Thanks a ton! Be sure to sub and share any videos you think others would like!
Ty for this video!!! You were right!!!
Hahaha glad it could help you!!!
great info mate 😀 👌 👍 👍
Thanks a ton. I just know there are many new people to the hobby and they may be overwhelmed when they have an issue.
This video was helpful!
Awesome! I hope you subbed and be sure to share this with anyone else who might find it helpful!
If you just changed your motor double check the set screw because it could be hitting something else. Check for rocks or debris in the gears too. So many times the clicking comes from picking up something in the teeth.
On my on-road it had a pin that kept the stub wheel axles and dogbones connected together and that pin would slide out a little and cause clicking. Typically only when I turned one direction vs the other. It definitely didn't seem like a good design.
Yep, great info here!!! Thanks for helping the community!
@BrightDogTraining the set screw is used to attach the pinion gear. You can also get noise from the gear mesh. Try turning the gears without the motor and see if you can feel any spots with resistance.
With the spur and pinion, I wonder if putting something in between the two when setting up and tightening the motor down would help keep the mesh gap perfect and consistent for everyone. Especially those of us who's eye's are getting not so good with tiny stuff.....! LOL! Sometime you could stick between the teeth of the two, like a sliver of paper or dental floss or 4 lb braided fishing line or some kind of sewing thread, etc, etc. Just thick enough to get the perfect gear mesh spacing that can be slid out or feed out once the motor is tightened down.
Just a thought. :)
Most use a slip of paper. ;)
@@TheShopMiniRC Great. Good to know that works! :D
i noticed both the bottom screws fell out the front far ends of my axel an i have the Injora +4mm axels an they have little brass looking cylinder type things an its been a pain i have stormed my Tan carpet lol if someone seen me they would be laughing so hard. but i found one so i have three in. but im having issues when C10 is at full droop it vibrates a lot?
The vibrating is likely your driveshaft hitting links.
Mine more than clicking it's noisy and not turning the axles at times , I imagine there's a pin that broke in the transmission, do I bother taking it apart or just buy new transmission, I gave it to my neighbor with 2 little boys and the use the heck out of it. I used it alot b4 I gave to them , I figured I'd buy furitec for mine and just put new transmission back in there's. Maybe the hobby shoo can give me transmission they put furitc in all there personal ones , do they sell stock transmission? You don't have answer I'm just thinking out loud it could be mesh like you said going check that now 😎
You can pick up a metal transmission for like $20 on ali express or Amazon.
Why do they put an o ring on the diff gear I didn't put one on mine when I put the overdrive in and it's been running ruff I'm wondering if this is the reason
It helps keep the slop out. You definitely want to run at least one o-ring. Some people run one on each side.
I will try that thankyou
So my driveshaft is hitting the y link. Is there a way to get it off of it?
Shave the shaft, or the link, or go 4 link or lower your ride height.
Can you help my account 24 the black esc keeps blinking and won’t give any throttle I already got a new esc and it still won’t work
Make sure your battery is actually charging. Use a good charger to check the voltage.
@@TheShopMiniRC okay thanks I charged it and the original charger broke but I had a charger that is the same so am going to try it
@@guillermofernandez2956 I think you want to actually get a good hobby grade charger to check the battery (ask someone who has one to check your battery for you.)
If a battery gets too low, it has a cut off that stops the motor/esc from working. Usually you will still get steering, but no throttle.
If you are 100% sure your battery is good, then it’s likely something else. (Maybe motor?)
Hi! I had that problem where the screws for the knuckles hit the pins. I've got a few other problems too. Had to replace the esc with another stock one and now I have the use more throttle and can't crawl as smoothly. And my axels or wheels have alot of play which I show here at the start ua-cam.com/video/ytGf3T8hTio/v-deo.html
Worm gears generally have a lot of play in them like that. I think all my rigs move about that much.
@@TheShopMiniRC Ah ok! Thank you!
🤦♂️ Wish I watched this video 3 days ago lmao
What happened?!?!
@@TheShopMiniRC remember it was those screws too tight in my knuckles 😅 you literally mention it in this video 🤦♂️ subscirbed a lil too late but glad to be following your channel now for all this great info 😅 fell down a rabbit hole getting the trucks ready to go to rre this saturday
@@OutSpoken5280 Hahha oh yeah. Well, glad you got it fixed either way. ;)
When the drive shaft is hitting the Y link how do you fix this to stop it? My driveshaft has eaten a small Grove in the Y link. I also have binding somewhere that I need to try and find when I get some days off.
@@mtairgunner4044 4 link it if you can thats what i did because i noticed the same little groove in mine