Been around construction since I was 13...mainly HVAC and refrigeration...mechanical engineer now ...BUT even at the ripe old age of 57? I still learned a couple things from this video...thank you very much for sharing this...
I was a wood carpenter for 5 years ... I started my first metal stud job 2 years ago ...... I was so nervous so I watched this video literally a day before starting my metal framing job ..... now I’m a journeyman running a 4 man crew 3 framers and one more journeyman .... 🙌🏽
Jon Jones sorry not really ... I started as apprentice with a carpenter for 5 years and then started metal framing and it was very similar.... I’m sorry I don’t really know any books on metal framing ... but this video is very thorough 👌🏽👌🏽
Extremely useful video! Thank you so much for putting this together! - Up until now, I did not know anything about metal framing. Learned a great deal today! -Thank you so much, Mr. Ramirez!
Im 47 and went to Harpers ferry job corp/ united brother hood of carpenters and joiners of america pre apprenticeship.. i helped build the luxor*in vegas* and a couple of other big jobs b4 i switched to framing.. Thank You Dale & Mark for teaching me the basics.. Life is Good! To all young Men: get a trade make $$$ steady
I went to Boxelder in SD. For pre apprenticeship carpenter. Now I’m a diesel mechanic. But still a good trade to learn. And a very good program for young kids. I’m 41 now time goes by fast.
I’m a Philadelphia, Pa Job Corp alumni class of 1993. It’ nice to the advancement of the program I learned a great deal from all my instructors keep up the good work.
I don’t know why every so often this video shows up but I have to watch it. He explains everything so well. Would like to see the students build something too.
honestly to the people who wanna learn "metal framing". Its very easy and not difficult at all just watch your instructor carfully and do not hessitate to ask questions. I never went to school for it I just immediatly jumped into it due to my step dads friend for allowing me to work. im 21 and just started last week. Its a fun and very busy trade. Also always remember safty comes first always!. this is a trade where you must pay close attention or you or your partner/crew might end up hurt.
@@jbtwo1733 I start tomorrow and I'm gonna see what it's all about i guess. I've done wood framing a ton but never any metal framing. Seems pretty straightforward. A lot less material usage than wood it seems.
Wow, that was very cool! Huge amount of info in a very short time. You demonstrated many types of metal-to-metal joints and many types of complex wall openings in a VERY short period of time. And much of the nomenclature. The magnetic level is much easier to use than the traditional level on wood. Thanks, I will have to try steel framing on a small project.
I just finished building an outdoor kitchen using metal studs. The good news the granite tops didn’t collapse my frame… actually i overbuilt this thing. I wish I would of watched this prior to the build. Best takeaway is the stud’s openings should have small opening pointing down
Great Video! For people wanting to build an outdoor steel frame there is now a better alternative to track and studs called connectubes. Connectubes uses 1 1/2 galvanized steel rectangular tubes that are joined together with steel couplers and self tapping screws. No welding needed. It is sold wholesale to the public and is around the same cost as 18 gauge track and studs.
I hope this guy teaches the importance of layout so that the stud orientation is correct. I joined the union where I am after having moved 600 miles north and these idiots up here learned long ago the wrong way to turn studs and hang drywall so that the board is left protruding on one side because of this and starting the wrong direction with their hanging. I had to get it straight from Dietrich and print it for some of them to believe me...lost it, but need to get it in letter format again and tape it to every game box on every job. It's something so simple that so many get wrong too often up here in NY upstate.
From Sagada Philippines. We're planning to make our small Mt house with metal framing. This basic lesson really2 helps me much. It was well planned, straight to the point with my time well spent. It was like sex you don't want it to end 😂. Thanks Mr Ramirez. Keep up the good videos.
thanks for the lesson! this is what I plan to use on the walls in building my house. I learned a lot. Video was very informative and easy to follow. Two suggestions: camera-person: please get a tripod. the bouncing and spinning makes me dizzy. Instructor: keep facing the camera; we want to see you, not your back. ;-) Great start!
Thank you this video is really informative and easy to understand. Can we use metal stud to do a exterior privacy wall around a backyard patio to attach horizontal wood fenching? If yes if I expose the stud would the utah weather destroy it in time? Any suggestions please and thank you
The difference between a stud and a track is the "flange" on a stud which has a 90° leg of 1/4" at the end that adds rigidity, this usually comes after the leg which is called a flange in a stud and the flange is usually 1-1/4" on a non structural stud and 1-5/8" on a structural stud and a track has a 90° leg of 1-1/4". You can order an unpunched stud so you can't always go by the opening on a stud to say that it is a stud.
Great Instruction!! I learned something today.. I wonder if its cheaper wood framing or metal framing.. I talk to some of the old timers and I think they are biased on wood...
I have a question about the screws used. We never get to see the screws using up close. Most self tapping metal screws have a head on them that when driven down to its head still leaves the thickness of the head sticking up from the face of the metal stud surface. When you go and try to install dry wall on to a metal framed wall those screw heads will force your dry wall out the thickness of the head. In other words, the dry wall won't sit flush to the metal stud because the thickness of the screw heads suspend it away from the metal stud. How do you make the dry wall sit flush to the metal stud?
The screw heads dent into the backside of the drywall a bit but will also hump out the drywall a bit. At the ends of headers a drywaller will often beat on the screw heads and framing to drive it slightly below the plane of the wall. Another trick is to shave a little drywall off the backside of the sheet in bad areas.
Gracias, Rigo. I learned a lot in a short period. Now to see if you have a video for installing a floating steel stud wall, per code in expansive soil areas.
I don’t think that’s possible, metal track/studs have a coat of maximum of G90 making it strong against but not rust proof. Installing it on direct soil it’s not very think full. MHO.
Oscar robledo in areas with a lot bentonite in the soil, when the soil becomes wet it expands and will heave a concrete slab in a basement. In these areas (example, Colorado) it’s building code to have a gap of 1.5”-3” between a partition and the floor joists in a basement. You cannot pass inspection without this gap or “float”. Typically, a treated wooden 2”x4” is nailed to the floor and the wooden wall is attached to the overhead joists with a gap just above the treated 2”x4”. Then holes are drilled and spike nails inserted in the holes to keep the wall from swaying. I checked with out town’s engineer, and for steel studs, the wall is built and attached directly to the concrete floor of the basement. The wall needs to be 2” shorter than the height of the basement. Sliptrack (“U” snapped track with high sides) is attached to the joists above and the top of the wall sets into sliptrack. This allows the wall to slip up and down with movement of the concrete slab. Another iteration involves using a sliptrack with a series of elongated slots used to screw the wall to the sliptrack.
paul painter thank you for the information. I misunderstood the previous information (floating). I see that the expansion it has logic. But,If it’s seating on top of concrete, and expect that the concrete will move , that’s something interesting. I had worked on clay soil and understand the behavior of the water and clay, but we mixed with some regular soil, plus triturated stone, foam insulation and for moist barrier 4 mil poly sheating. (After study of soil) Thank you for the angle view, that’s info that come handy on different escenarios.
9:25 If you're doing a long wall it may help to put the top channel on the ceiling first. Having that bottom track on the floor while you're putting the top track up really gets in the way and can catch a lot of damage.
've seen on UA-cam where metal stud walls are being put up in basements. The metal stud wall is just inches away from the basement cement wall. They only put one screw in the bootm of the metal stud and one screw in the top of the metal stud. With only one screw at the top and bottom of the studs, would the studs be strong enough to hold two sheets of 5/8 drywall. One sheet put on and the second one put on top of that one?
Hello, Mr instructor looks like you know a thing or two. Here at Baptiste, we have 8yrs formal training and the proper use of instruments for our trade is vital to fellow manufactures spec. Too have a level upright is called plum not leveled to have it leveled is from left to right
ANYBODY KNOWS WHERE CAN I GET THE WHOLE COURSE? IM GUESSING MUST BE A 30 HOUR COURSE TO KNOW HOW TO BUILD WALLS, CEILING , FLOOR ETC. ANY SITE WHERE TO BUY IT?
This video was very informative, I am planning on an outdoor kitchen using these metal studs , so this helps
Seemed that half the entry were not there.
This is actually what I was looking for. The negativity is unnecessary!!!
Been around construction since I was 13...mainly HVAC and refrigeration...mechanical engineer now ...BUT even at the ripe old age of 57? I still learned a couple things from this video...thank you very much for sharing this...
Thank you Mr. Ramirez. Now I feel confident to frame out my outdoor kitchen.
This is exactly what I wanted to learn! Thanks Mr. Ramirez, you're a great instructor and teacher!
I was a wood carpenter for 5 years ... I started my first metal stud job 2 years ago ...... I was so nervous so I watched this video literally a day before starting my metal framing job ..... now I’m a journeyman running a 4 man crew 3 framers and one more journeyman .... 🙌🏽
TAHY09 best tips for new comers?
Rodrigo Lopez measure twice cut once 👌🏽 and always have batteries charging
Jon Jones sorry not really ... I started as apprentice with a carpenter for 5 years and then started metal framing and it was very similar.... I’m sorry I don’t really know any books on metal framing ... but this video is very thorough 👌🏽👌🏽
I'm not a carpenter but I've framed with both and I prefer metal.
@Chaos Covington rondo professional installation manual, gyprock red book. Enjoy
Extremely useful video!
Thank you so much for putting this together! - Up until now, I did not know anything about metal framing.
Learned a great deal today!
-Thank you so much, Mr. Ramirez!
Great lesson. A helpful addition would be to demonstrate the cuts made on the saw and by hand. Thank you. My homeschooled sons loved it!
Rigo! You are a natural. Great job teaching these kids and me too!
I am preparing to install metal studs so this lesson was exactly what I needed, thanks very much, Mr. Ramirez.
omg all instructors should present the material in this format great job
Im 47 and went to Harpers ferry job corp/ united brother hood of carpenters and joiners of america pre apprenticeship.. i helped build the luxor*in vegas* and a couple of other big jobs b4 i switched to framing.. Thank You Dale & Mark for teaching me the basics.. Life is Good! To all young Men: get a trade make $$$ steady
I went to Boxelder in SD. For pre apprenticeship carpenter. Now I’m a diesel mechanic. But still a good trade to learn. And a very good program for young kids. I’m 41 now time goes by fast.
I’m a Philadelphia, Pa Job Corp alumni class of 1993. It’ nice to the advancement of the program I learned a great deal from all my instructors keep up the good work.
I'm a computer scientist and I have no intention of getting into building frames, but I found your video fascinating to watch and very informative.
Thanks Mr Ramirez. It was concisely information.
Thank you for posting this! Great lesson and gives me so good ideas for my upcoming BBQ build!
Great lesson! I hope to see more videos like this.
Absolutely outstanding presentation! Thanks.
Thank you. I might not get fired this week . Fake it till u make it !!!!
I don’t know why every so often this video shows up but I have to watch it. He explains everything so well. Would like to see the students build something too.
Thanks for naming the types of cuts. I'm planning on building a tiny home on wheels using steel studs.😉
honestly to the people who wanna learn "metal framing". Its very easy and not difficult at all just watch your instructor carfully and do not hessitate to ask questions. I never went to school for it I just immediatly jumped into it due to my step dads friend for allowing me to work. im 21 and just started last week. Its a fun and very busy trade. Also always remember safty comes first always!. this is a trade where you must pay close attention or you or your partner/crew might end up hurt.
Any tips or tricks for beginners? Have experience with wood but looking to get into commercial metal framing.
@@jbtwo1733 I start tomorrow and I'm gonna see what it's all about i guess. I've done wood framing a ton but never any metal framing. Seems pretty straightforward. A lot less material usage than wood it seems.
Great video! Aproached practical side and also nomenclature, opening doors or windows to greater views of the subject!
Thank You so much, I’ve learned a lot!!! Much appreciated. 🙌🏾👊🏾
Much respect to these guy who has educate me a little more
Wow, that was very cool! Huge amount of info in a very short time. You demonstrated many types of metal-to-metal joints and many types of complex wall openings in a VERY short period of time. And much of the nomenclature. The magnetic level is much easier to use than the traditional level on wood. Thanks, I will have to try steel framing on a small project.
Great video, well explained for these young apprentices. Who by now should almost be journeymen.
I just finished building an outdoor kitchen using metal studs. The good news the granite tops didn’t collapse my frame… actually i overbuilt this thing. I wish I would of watched this prior to the build. Best takeaway is the stud’s openings should have small opening pointing down
Excellent for beginners....
I found this so helpful I went to look for more videos from Mr. Ramirez but only found one other.
Great Video! For people wanting to build an outdoor steel frame there is now a better alternative to track and studs called connectubes. Connectubes uses 1 1/2 galvanized steel rectangular tubes that are joined together with steel couplers and self tapping screws. No welding needed. It is sold wholesale to the public and is around the same cost as 18 gauge track and studs.
Doesn't wholesale mean sold to retailers who then mark it up to sell to public? Can diyers purchase connectubes?
About to frame out a fireplace, and would love to know what screws are being used.
he explained it so well.......thank you very much for the video.
I hope this guy teaches the importance of layout so that the stud orientation is correct. I joined the union where I am after having moved 600 miles north and these idiots up here learned long ago the wrong way to turn studs and hang drywall so that the board is left protruding on one side because of this and starting the wrong direction with their hanging. I had to get it straight from Dietrich and print it for some of them to believe me...lost it, but need to get it in letter format again and tape it to every game box on every job. It's something so simple that so many get wrong too often up here in NY upstate.
Saludos Rigo Ramirez muchas gracias x tu enseñanza Dios lo bendiga
Awesome lesson thank you, I've got a 14.5' wall with a door opening that will be easy cake now.
This is the perfect video what I was looking for. Thanks for sharing
very good lesson and using all the ppe necessary
Great Job amigo. Also like the watch.....
Your training is greatly appreciated thank you 🎯🍻
Very educational! I would love to see the next lesson.
Good video for understanding how to work with metal studs. Thanks.
From Sagada Philippines. We're planning to make our small Mt house with metal framing. This basic lesson really2 helps me much. It was well planned, straight to the point with my time well spent. It was like sex you don't want it to end 😂. Thanks Mr Ramirez. Keep up the good videos.
great video for the newbees thanks
Thank You for Your time and Help👍
thanks for the lesson! this is what I plan to use on the walls in building my house. I learned a lot. Video was very informative and easy to follow.
Two suggestions: camera-person: please get a tripod. the bouncing and spinning makes me dizzy. Instructor: keep facing the camera; we want to see you, not your back. ;-) Great start!
Thank you for this Video please make more vdeos too help us the DIYers out thank you this was helpful💯
Excellent lesson.
@Hello David how are you doing
Rigo you do a great job teaching 👍
This was an excellent training class. What does he say at 17:49 "cold rolled runner?" I'm seeing results for "Cold Rolled Channel"
Thank you for the training
Fantastic video Sir. can you show more? thank you
Thank you for posting this you have helped me SO much THANK YOU
Great demonstration.
Thank you this video is really informative and easy to understand. Can we use metal stud to do a exterior privacy wall around a backyard patio to attach horizontal wood fenching? If yes if I expose the stud would the utah weather destroy it in time? Any suggestions please and thank you
The difference between a stud and a track is the "flange" on a stud which has a 90° leg of 1/4" at the end that adds rigidity, this usually comes after the leg which is called a flange in a stud and the flange is usually 1-1/4" on a non structural stud and 1-5/8" on a structural stud and a track has a 90° leg of 1-1/4". You can order an unpunched stud so you can't always go by the opening on a stud to say that it is a stud.
This is exactly what I was looking for. Thank you :)
I always wondered what came of the stand and deliver students….. this teacher is definitely using that advanced math.
excellent! love the basic knowledge! next is mastery
Thank you.
Thank you sir for such good instructions on building a steel stud wall. I learned something new already.
Thank you Mr Ramirez!
Excellent video, very informative. Cheers.
Great Instruction!! I learned something today.. I wonder if its cheaper wood framing or metal framing.. I talk to some of the old timers and I think they are biased on wood...
I love metal framing
Good instruction.
great job sir
Good video, good information. Thanks
Question: I want to do offset studs so that I can insulate on each side. How would you do that with this material? Just double it up?
Great video, gracias maestro!
Informative for a beginner but for doorways you need to double up studs on either side and the header gets a center stud
Do More videos, they r very useful
Thanks for sharing
Where do u use the tongue piece
THANK YOU. I GOT THE LESSON. I CAN INSTALL A PARTITION IN MY ROOM NOW.
Excelente clase
so when framing with metal you dont need king stud and cripple ???
Good job 👏 👍
I have 28 years experience and I am tired of working in the field how do I learn to teach a class likenthis
I have a question about the screws used. We never get to see the screws using up close. Most self tapping metal screws have a head on them that when driven down to its head still leaves the thickness of the head sticking up from the face of the metal stud surface. When you go and try to install dry wall on to a metal framed wall those screw heads will force your dry wall out the thickness of the head. In other words, the dry wall won't sit flush to the metal stud because the thickness of the screw heads suspend it away from the metal stud. How do you make the dry wall sit flush to the metal stud?
The screw heads dent into the backside of the drywall a bit but will also hump out the drywall a bit. At the ends of headers a drywaller will often beat on the screw heads and framing to drive it slightly below the plane of the wall. Another trick is to shave a little drywall off the backside of the sheet in bad areas.
You’ve confirmed what i thought might be options for dealing with screws, but wasn’t sure it was OK! Thanks
You use Wafer head screws. They are self tapping fine thread for metal, and the head on them is flat so you can drywall over it.
What do you do when you can’t get to the back side? It’s going to be against the insulated block wall.
My thoughts exactly...
Angle shaft
Also you can screw from the front it just takes a lot of practice
Is metal crimper/stud crimper good for this job??
Thank you 😊
Can we use extruded aluminum as studs or is that no it structurally sound
Great lessons, Union all day!
Great beginners tutorial .
Gracias, Rigo. I learned a lot in a short period. Now to see if you have a video for installing a floating steel stud wall, per code in expansive soil areas.
I don’t think that’s possible, metal track/studs have a coat of maximum of G90 making it strong against but not rust proof.
Installing it on direct soil it’s not very think full.
MHO.
Oscar robledo in areas with a lot bentonite in the soil, when the soil becomes wet it expands and will heave a concrete slab in a basement. In these areas (example, Colorado) it’s building code to have a gap of 1.5”-3” between a partition and the floor joists in a basement. You cannot pass inspection without this gap or “float”.
Typically, a treated wooden 2”x4” is nailed to the floor and the wooden wall is attached to the overhead joists with a gap just above the treated 2”x4”. Then holes are drilled and spike nails inserted in the holes to keep the wall from swaying.
I checked with out town’s engineer, and for steel studs, the wall is built and attached directly to the concrete floor of the basement. The wall needs to be 2” shorter than the height of the basement. Sliptrack (“U” snapped track with high sides) is attached to the joists above and the top of the wall sets into sliptrack. This allows the wall to slip up and down with movement of the concrete slab.
Another iteration involves using a sliptrack with a series of elongated slots used to screw the wall to the sliptrack.
paul painter thank you for the information.
I misunderstood the previous information (floating).
I see that the expansion it has logic.
But,If it’s seating on top of concrete, and expect that the concrete will move , that’s something interesting. I had worked on clay soil and understand the behavior of the water and clay, but we mixed with some regular soil, plus triturated stone, foam insulation and for moist barrier 4 mil poly sheating.
(After study of soil)
Thank you for the angle view, that’s info that come handy on different escenarios.
9:25 If you're doing a long wall it may help to put the top channel on the ceiling first. Having that bottom track on the floor while you're putting the top track up really gets in the way and can catch a lot of damage.
How so
@@Hockeykid1515 walking on it, tripping on it, driving the high lift over it.
What size screws are those?
Nice well done
Mr.Ramirez were is the schol to take this clases tankyuo
Well done! I would like to share this video with my new apprenticeship instructors to give them an example of how to conduct a proper class.
Thanks man!
've seen on UA-cam where metal stud walls are being put up in basements. The metal stud wall is just inches away from the basement cement wall. They only put one screw in the bootm of the metal stud and one screw in the top of the metal stud. With only one screw at the top and bottom of the studs, would the studs be strong enough to hold two sheets of 5/8 drywall. One sheet put on and the second one put on top of that one?
Yes... actually screws are not needed, just the outer studs. The other studs what gives rigidity is the drywall.
Hello, Mr instructor looks like you know a thing or two. Here at Baptiste, we have 8yrs formal training and the proper use of instruments for our trade is vital to fellow manufactures spec. Too have a level upright is called plum not leveled to have it leveled is from left to right
Plumb, not plum...
Plumb is in vertical
Level is horizontal
ANYBODY KNOWS WHERE CAN I GET THE WHOLE COURSE? IM GUESSING MUST BE A 30 HOUR COURSE TO KNOW HOW TO BUILD WALLS, CEILING , FLOOR ETC. ANY SITE WHERE TO BUY IT?
the only way you can get the whole course is to go to job corps in utah
30 hours? lol
Awesome
Does it not matter which direction the stud is facing vertically?
Great video. Very Clear instruction..Thank you very much
Loved it when the student wrote on the stud and the teacher thought it was real
Just the information I needed. Thanks :)