Washer Troubleshooting: Front-Load Washer Won't Fill- How to Fix Your Washer | PartSelect.com

This week we're taking a look at some of the causes of a washer that won't fill. Steve will take you step-by-step through the process of how to troubleshoot a washer that won't fill; from the different components that could be causing the issue, and where they're located, and how to test them so that you know if they're defective.
You'll first want to check the obvious (0:28):
Are the faucets turned on?
Are the inlet hoses kinked?
Is there adequate water pressure?
Here are the most common parts that could be causing a no-fill situation:
Inlet Fill Valve (0:53)
Door Switch/Lock Assembly (5:28)
Water Level Control (6:43)
Control Board (8:44)
How to Run a Diagnostic Cycle (10:23)
Here's how to use a Multimeter to check for continuity:
• Appliance Repair: How ...
Does your washer fill, but won't drain properly? Here's how to troubleshoot that symptom:
• Washer Troubleshooting...
*****************
Find this video helpful? Hit the LIKE 👍 button, and don’t forget to SUBSCRIBE to our channel for more help with your appliances!
Leave us a comment below and let us know what video YOU would like to see us do next or ask a question about your appliance!
More Washer-Specific Repair Videos can be found on the Washer Repair playlist on our UA-cam Channel: • Washer Troubleshooting...
For more help diagnosing your Washer problems, or to find an instructional video that is specific to your model, visit our website at www.partselect.com
At PartSelect.com, we have thousands of replacement parts for a variety of household appliances. We specialize in OEM (Original Equipment Manufacturer) parts, so you can rest assured that your part will fit with your model appliance.
PartSelect.com is committed to providing you with high-quality parts, quickly and easily. Buy with confidence by learning about our Same-Day Shipping, Secure Shopping, and 30-Day Return Policy on our website.
www.partselect.com/Same-Day-S...
www.partselect.com/Thirty-Day...
www.partselect.com/Secure-Sho...
At PartSelect, we’re here to help at every stage of your repair. Our friendly Customer Service Representatives are happy to help with any questions you have about your repair, your appliance, or your replacement part. Visit our website to try our new LIVE CHAT feature or speak to one of our representatives over the phone at 1-888-260-4310.
Visit Us on Social Media!
/ partselect
/ partselect
www.pinterest.ca/partselect/

[@TonyG-iu4td]

A good instructional video. Made easy for most people that don't have great knowledge on the subject. Thank you

[@boneseraspe]

If The cold water level is clog and if you don't want to use hot water for sometimes just removed the hot water hose and replace to cold water hose and connect to cold water outlet.

[@elainepotts8433]

while hooked up what if you do not have water coming out of neither hot nor cold

[@alfredretana6987]

If you follow the video, and there are many, they instruct you how to diagnose the problem. Start with the simple instructions and if need be start diagnosing more involved procedures. The obvious first is are the water valves open...then are the lines going to the washer clear...are the inlet valves the lines hook up to clear meaning do you have to clear up or clean up the screens at the in flow... you slowly and systematically go through the diagnosis until your problem is solved. Don’t be discouraged just go through the steps and realize sometimes you fix one problem then find another. You will find you will learn a lot about your appliance, save a lot of money and enjoy the process. Always be safe and unplug your appliance, know how to turn the water off outside if you need to, know that it could take a few days to analyze your appliance and order your replacement part, make sure you pull your appliance out so you have room to work on it mostly taking the top off and sometimes the back. See as many videos, about 5, to get comfortable with what you should be dealing with and the most important if you feel uncomfortable with doing any of these procedures have someone help you or just hire a technician...they are the pros but usually you/we can handle it. For me it’s fun learning. Good luck

[@abrahamvaro5482]

Super very nice video thanks!!!

[@moslemdan8281]

Very nice video thanks

[@tehseen]

Hi Sir
Whirlpool manual selector model.
Its prewash water taking side is ok but wash side is not taking water.
Please guide .

[@danielgrenier2417]

Good info. CAN ANYONE HELP? I have a Samsung-made Kenmore 592-49427 front loader. Hot or cold water flows in just fine on SOME settings (Delicate, Express etc) but NO water, hot or cold, goes in on other settings (Normal, Heavy etc). I swapped the obvious - main "computer" cct board (DC92-00686H) - but the problem stays exactly the same! What else can it be??? I'm stomped!

[@tehseen]

Excellent

[@dmytrovolodimirovich]

Thank you for this video. My Whirlpool Washer WFW9550WR00 is having a similar issue, any help is appreciated. @

[@elgastsos210]

Where can i get a new board?

[@nadinelewis7358]

My machine taking in water but running out back what can I do

[@joymuthue3265]

Hi.. dear..did you get any assistance

[@soniamoreno1653]

l