@@aradhyagaonkar9542 He died in bad motorcycle accident. I miss His amazing contribution to FPV. There is a really special memorial video one of His followers made. It was such an amazing tribute. Think if you type. Blue Falcon tribute you might find it. Peace out man.
Hi, I am using and f3-evo-brushed v2 it has a tx connected to it on uart2 and a TX06 FPV CAM connected to the battery it works fine. I wanted to connect the minimosd micro to it but it only show data then connected to uart2, uart1&3 aren’t working. Any idea what I am doing wrong?
Hi im having problems doing the set up in beta-flight ... for whatever reason motor 3 dont spin properly (lower speed compare with the rest) ... Do you know how to fix it?? thanks
is there a way to set the motors to a different position I need to move motor 6 to motor 1 because the tiny surface mount broke off on motor 1 so now I need to use motor 6
Tried this on two boards and now I can’t connect to beta after flashing. First board was this same one as yours omnibus Eachine and second was a spf3evo. Not sure what I did wrong but they flash but now can’t connect anymore
Aloha JC Can you tell me what I'm missing. I have successfully loaded betaflight To my f3 Evo. How ever when I replug it in my computer says it doesn't Recognize the USB device. I'm so close I can taste it.😎👍
Really great presentation love how clear the VO is. Only issue is that when you refer to the link in the top right in Firefox there is no link and i cant find it on your page. I have the SP racing F3 EVO with the Frysky rx is the process the same?
You may have two of the motors wires run backwards. Thats really the only thing that can make them spin the wrong way since they are DC motors and dont use ESCs.
i cant get mine running on 2s as soon i plug the battery motors start spinning full speed i did solder the pin for 2s when i plug the 1s battery works fine
Thanks for the vid sir. I am attempting to maiden a Phoenix Flight Gear 110mm frame with a HOBBYMATE Brushed F3 Mini Flight Controller. I had power glitches during Betaflight setup that cause the FS A8S rx to power off while connected to Betaflight. The FC and VTX still have power while connected to Betaflight. Also, after doing all the setup following the directions in this video, I can get airborne and controls work (yaw, pitch, roll). The throttle is at 70% to get hovering and after bumping up the throttle to gain more altitude the quad gains altitude then drops and loses connection to the tx. Now when I plug in a battery, the FC won't power on, but the rx and vtx do. If I plug back into Betaflight everything powers up fine. Very confusing to say the least! Any ideas why this is happening?
UPDATE - The quadcopter is flying now. I happen to have two new fully charged 1s 370mah batts. I tried one and now it's flying. The throttle is still at 70% to hover. I would like to be around 50% stick. How do I change that?
I COULD NOT GET MY QUADCOPTER TO FUNCTION PROPERLY WITH THIS BOARD UNTIL i WOULD PLUG IN QUAD BEFORE TURNING ON TRANSMITTER. Now it works fine as long as I plug in quadcopter BEFORE turning in transmitter!!!!
Hi can you help me? I have solid red light when i connect USB , but its not connecting to cleanflight or betaflight. It is trying open serial Port in configurators but closes then. It also says stm32 communication failed when im trying to flash?? Any good advice? Thank you.
Miss you J.C. Always learned so much from you. Your videos and voice live on forever.
Is he dead?
@@aradhyagaonkar9542 He died in bad motorcycle accident. I miss His amazing contribution to FPV. There is a really special memorial video one of His followers made. It was such an amazing tribute. Think if you type. Blue Falcon tribute you might find it. Peace out man.
There is a few tributes out there. The one that I saw was by AdjrianNickeloden called Amazing you tuber Project Blue Falcon.
I have used the same frame to upgrade my qx90c and love it, just getting into beta now, these little guys are the future of Droning!
Can i use modul Rx micro elrs?
Can u make a tutorial video?
Does this flight controller connect with the USB and The battery at the same time?? like the other ones ?
Can we connect ibus to the f3 evo brushed fc?
Hi, I am using and f3-evo-brushed v2 it has a tx connected to it on uart2 and a TX06 FPV CAM connected to the battery it works fine. I wanted to connect the minimosd micro to it but it only show data then connected to uart2, uart1&3 aren’t working. Any idea what I am doing wrong?
can the f3evo spracing receive iBus signal to one of the UARTs?
With some flight controllers you must connect receiver to tx! I could not get my receiver to work today until I connected it to tx instead of rx.
Hi i got the wrong version (frf3 evo wich has frsky onboard reciver) and i am wandering if i can use flysky exrange reciver instead?
Iam usung f3 evo v2 motors spinning without addition throttle. I put pwm rate 1000 on cleanflight
Hi im having problems doing the set up in beta-flight ... for whatever reason motor 3 dont spin properly (lower speed compare with the rest) ... Do you know how to fix it?? thanks
Hey where can i download older version betaflight?? I cant seem to be found any older version
is there a way to set the motors to a different position I need to move motor 6 to motor 1 because the tiny surface mount broke off on motor 1 so now I need to use motor 6
I'm not sure about these brushed boards. I've never tried it. I know with the normal boards you can use a custom motor mix to mote motors around.
that what I thought not having much luck with this board worked for a couple of times then everything went downhill
You can I did found guide online
Tried this on two boards and now I can’t connect to beta after flashing. First board was this same one as yours omnibus Eachine and second was a spf3evo. Not sure what I did wrong but they flash but now can’t connect anymore
this video solved all my problems with drone, nice work and thx
Wondering where you ended up with your PIDS. CPU cycle freq from 8 to 4 Khz...how did that work out for you?
Once again JC helps me out . Thank you bro.
So your thoughts on configuration page Motor PWM separate from PID Speed?
Aloha JC
Can you tell me what I'm missing. I have successfully loaded betaflight
To my f3 Evo. How ever when I replug it in my computer says it doesn't
Recognize the USB device. I'm so close I can taste it.😎👍
Very good video thank you. Quad working perfectly but too fast flying. Please help me how to set up PID tuning
Really great presentation love how clear the VO is. Only issue is that when you refer to the link in the top right in Firefox there is no link and i cant find it on your page. I have the SP racing F3 EVO with the Frysky rx is the process the same?
graupner is ppm right?
nice vid, just got all set up but all 4 motors going clockwise ? help needed !
You may have two of the motors wires run backwards. Thats really the only thing that can make them spin the wrong way since they are DC motors and dont use ESCs.
thanks got flying on 2s set up but only get 20 sec. before slow
drop & batt very hot , vbat still at 7v. what am i doing wrong ?
reset all motors reflashed now going to full throttle when i connect 2s ? can you help ?
flip the wires on the 2 motors that are going the wrong way
Did you find a solution to all motors full throttle? I have the same problem.
i cant get mine running on 2s as soon i plug the battery motors start spinning full speed i did solder the pin for 2s when i plug the 1s battery works fine
yul merced don't solder the 2 pins just leave it like it comes factory just plug in the 2s n it'll work
Thanks for the vid sir. I am attempting to maiden a Phoenix Flight Gear 110mm frame with a HOBBYMATE Brushed F3 Mini Flight Controller. I had power glitches during Betaflight setup that cause the FS A8S rx to power off while connected to Betaflight. The FC and VTX still have power while connected to Betaflight.
Also, after doing all the setup following the directions in this video, I can get airborne and controls work (yaw, pitch, roll). The throttle is at 70% to get hovering and after bumping up the throttle to gain more altitude the quad gains altitude then drops and loses connection to the tx.
Now when I plug in a battery, the FC won't power on, but the rx and vtx do. If I plug back into Betaflight everything powers up fine.
Very confusing to say the least!
Any ideas why this is happening?
UPDATE - The quadcopter is flying now. I happen to have two new fully charged 1s 370mah batts. I tried one and now it's flying. The throttle is still at 70% to hover. I would like to be around 50% stick. How do I change that?
Very nice video. Properly explained !!!! Thank you
I COULD NOT GET MY QUADCOPTER TO FUNCTION PROPERLY WITH THIS BOARD UNTIL i WOULD PLUG IN QUAD BEFORE TURNING ON TRANSMITTER. Now it works fine as long as I plug in quadcopter BEFORE turning in transmitter!!!!
Rip bro, you the best
Great vid, thx for sharing!
Great tutorial!!
can you help me pls
damn jc I could really use your help rite now. r i p
Hi can you help me? I have solid red light when i connect USB , but its not connecting to cleanflight or betaflight. It is trying open serial Port in configurators but closes then. It also says stm32 communication failed when im trying to flash?? Any good advice? Thank you.
he is dead, man
Install ImpulseRC Driver Fixer Tool, Zadig, the DFuSe package, etc, and follow an online manual as to the steps