How to Install Flat Transitions Between Laminate Flooring and Tile Tips MrYoucandoityourself
Вставка
- Опубліковано 5 вер 2024
- Here are some tips about how to install flat transitions between laminate flooring and tile. Previous MrYoucandoityourself video: • How to Make and Instal...
THINGS I MENTION IN THIS VID:
- TRANSITION ALUM T9/25AT - goo.gl/RYo3Y6
- Hot Gluegun - amzn.to/2hOEuz2
- Adhesivegun - amzn.to/2hOEoI4
- Construction Adhesive - amzn.to/2hOFeEz
- Heavy-Duty Utility Knife - amzn.to/2kIvPvY
SUBSCRIBE FOR MORE VIDS! www.youtube.com...
ALSO FIND ME HERE:
www.hardwoodflo...
/ mryoucandoityourself
/ ovisha
------------
STUFF I USE TO MAKE VIDEOS:
Canon T5i - amzn.to/2i3ptu5
Favorite tools:
1.Woodworking:
- Dewalt Miter Saw - amzn.to/2i7JonF
- Miter Saw Stand - amzn.to/2hQbdDM
- Dewalt Table Saw - amzn.to/2h3aOgy
- Milescraft FeatherBoard - amzn.to/2kjsvIC
- Router Table - amzn.to/2ikRmO2
- Dewalt Miter Saw Crown Stops - amzn.to/2hObQOa
- Pin Nailer 23-Gauge - amzn.to/2ibSUds
- Dewalt 18 Ga nailgun - amzn.to/2i7TTaa
- Dewalt 16 Ga nailgun - amzn.to/2h33B06
- Dewalt circular saw - amzn.to/2jkgG80
- Compressor - amzn.to/2ihgl0X
- Compressor hose - amzn.to/2kOlyyl
- Ridgid Vacuum - amzn.to/2i7HWRZ
- Festool 36 Auto Clean Vacuum - amzn.to/2jt9jX0
- Makita Jig Saw - amzn.to/2i7Oe3V
- Makita Cordless Tool Kit - amzn.to/2i2oNVF
- Laminate cutter - amzn.to/2h3A6LG
- Rubber Mallet - amzn.to/2i7mnBa
- Rockwell Versacut Saw - amzn.to/2h3zTYB
- Fein Multimaster - amzn.to/2gVcZQ0
- Undercut Saw - amzn.to/2i3poqc
- Angle Grinder - amzn.to/2jXLnMh
- Sliding T-Bevel - amzn.to/2i3qMJu
- Wood Glue - amzn.to/2i3vqH4
- Tongue and Groove Glue - amzn.to/2hC8bD9
- Duct Tape - amzn.to/2jk6WdU
- Scotch Masking Tape - amzn.to/2kMnA6p
- Clamp - amzn.to/2lqwJxL
- Irwin Clamps - amzn.to/2mWmmDE
- Water Based Spray - amzn.to/2lsKSNZ
- Bostik Best flooring glue - amzn.to/2kLc4U6
- Waxed Paper Underlayment - amzn.to/2iiCi3m
- Laminate Flooring - amzn.to/2mh4fdX
- Flooring Underlayment - amzn.to/2lYSXZd
- Finish Stain Marker - amzn.to/2n2FEWw
Thanks for watching! Please give this video a thumbs up, leave a comment and add to your favorites! Please share this video with your friends, family, and animals it really helps me out! =]
All MrYoucandoityourself videos are here: www.youtube.co...
Brilliant. Just what I was searching for. Thank you for making this video and sharing.
Before glue it, sending bottom of this transition with sand paper for better bonding and use Pl400 or construction glue as well. Thanks.
Great video! I just moved into an apartment and had this very situation. Instead of waiting on the landlord to get around to it, I did it myself using your video. Looks wonderful! Thanks so much!
Glad it helped!
Thank you. Perfectly explained.
Very professional looking. Clean and looks part of the design. Thanks again !
You’re welcome! Thanks for your comment!
Many of you asked my opinion about how to install transitions between laminate flooring and tile. Here it is! I hope this video will give you some additional ideas. If you make this job in different way - just show your skills, so we can learn from each other.
If that's laminate flooring, it will expand and you did not leave any expansion gap. The floor planks may pop up depending on the magnitude of expansion, depending on humidity and temperature variation.
Hi Bogdan, there is expansion gap1/4”
Exactly what I needed. Thank you for sharing!
Hi Melissa, Thanks for watching and positive comment!
Your videos are very useful, thanks
Thanks a lot!
Спасибо. Очень доходчиво.
Благодарю!
Great video, never thought of using my hot glue gun. Now I will👍
Thanks for watching and commenting!
You sir think outside the box. Great job!
Thanks a lot!
Great video thank you .
You are welcome!
Thank you for your instructions. It helped me.
I am happy to help you!
I wonder how long it's going to take for that piece of metal to get all scratched up from people waling on it.
We used it over 5 years - no any scratches. Thanks!
Very nice! I've searched the links you provided and am not sure which one is where you purchased the transition piece.
Hi crissala, transition in description T9/25AT - google it. You can find in home depot and lowes. Thanks for watching!
Thank you! Great videos!
I am happy to help!
Great tutorial video as always 🙏🙏
You are so professional, where are you located
In Vancouver. Thanks
you are the Master
Thanks a lot for your positive comment!
Thank you going to go fix mine right now👍
Great!
Excellent work. Looks great.
Thanks!
Good tips
Thanks!
Epoxy will work as well. Just make sure your material is very clean.
Thanks for your advice!
Looks amazing
Thanks!
Good job
Thanks!
The hot glue ended up on the tile side not laminate which I thought you said would have the hot glue. But that aside I question how long any glue will hold over time especially on something you walk on.
I think you are right, I've been doing flooring for quite a while. This glue doesn't look like it will hold very long. There's only one glue I know of that I think might hold. That expensive shit that mixes two different chemicals in the nozzle you screw on.
That hot glue was only for temporary hold down while the construction adhesive cures. No glue on the laminate side to allow for expansion
That was to hold the transition in place while the construction glue dries. He said the laminate is a floating floor so it needs to be able to move and therefore do not want to glue it.
What if the tile flooring is much lower than the laminate flooring? By say 4mm difference ?
Use a reducer or match the height of both floors.
Also, you can watch this video, I did this levelling to match the height for the floor to install the aluminum transition. - ua-cam.com/video/iyjqP9YgPrA/v-deo.html
Think this would work between tile and hardwood that are 1/8” different height?
No, you have to take regular transition with different height, it’s call reducer.
Hi,
Where can I purchase that particular low profile aluminum transition?
Thank you.
You can find it any tile store.
Great tips, I love it. Thank you for sharing.
Hi Metals, Thanks for for watching!
How about transition is curved in design? Can I still use metal material on it? . Thanks!
I guess not.
What the best way to lay vinyl click down to a tile entry way on concrete
For any floating floor you need install transition, otherwise you will get a problem in a future. Thanks
Super tip, again thanks for sharing. The Boss!!!
Thanks!
Nice floor tiles
It's my favorite!
What type of schluter transition was used on this?
You can find link in description for this video. Thanks!
Thank you for sharing! What grit sandpaper did you use?
Hi, on the T- leg has edge, which is don’t give it glue properly to the tile. Now I use 4 inch angle grinder, for cutting off this edge and make rough bottom T moulding for better bonding.
Is this helpful?
What is the name of the construction glue?
Hi, It's call "Construction glue" by Titebond, or you can buy PL 400 in Home Depot. Thanks!
How big gap between tile and laminate flooring
3/8"
Hello - would you ever transition a curbless shower (tile in the shower) to LVP (bathroom floor) using this method?
No, sorry.
Great video, thanks!!
You are welcome!
Do with a transition between laminate floor and sheet vinyl you would glue the vinyl side?
Hi Kirk, if vinyl not floated, yes.
We have tiled transition bars in our bathrooms but will be taking up the carpet in the hallways outside of the bathrooms. Is there a way to keep the existing bathroom transition bar? Would we need another transition bar?
Hi Andrea, If this transition in good condition you can reuse it. Thanks!
Why not just use construction adhesive on the whole strip...whipe excess with rag..
Because I used two type of glue there.
@@MrYoucandoityourself what’s the purpose of a glue gun other then to build popsicle stick houses...
You glued only one side. Can I put that quality caulk on the other side that always stays flexible?
From other side should be 1/4” gap for floating floor moving. I don’t recommend you put caulk. Thanks!
Great video! Will this work for uneven tile to laminate surface?Maybe aboit 1/2 ince height difference. Home depot website says for even surface transition. Thanks
Hi, only for even laminate and tile floor.
Where can I buy those strips?
In flooring stores who sell tiles. On Amazon, link in description. Thanks
@@MrYoucandoityourself link does not work
How wide is the strip? I need atleast 1.5 inches
This transition 1 inch.
1 1/2 gap....u must have cut short...u may need a larger threshold type transition....typically the way I learned u should be within 3/16ths ....layout is key
thank you
You are welcome!
👍👍😉
Thanks!
Use silicone
We are not using silicon instead of overlap transition, because if some issues with floating floor it’s not be covered by insurance.
just curious, is this a Ukrainian accent you have? :)
Canadian.
you puted both glue one side 😄😄😄😄😄😄
Yes.
Yes, I did it, because other side is floating floor. Thanks
Классные ролики. У Вас случайно на русском канала нет, или может знаете кто из североамериканских ютьюберов подобные темы на русском пишет?
Привет Виталий. я делал такой канал. Там было столько критики и ругани, что мы удалили с него все видео.
Очень жаль. Лучше бы вы просто комменты отключили. Но если решите снова сделать канал на русском, один подписчик у вас уже есть. Удачи.
Привет Виталий, спасибо. С Новым Годом! Удачи!
Большое спасибо, и Вас С Новым Годом!!!
Great graphics but terrible sound. The strong accent with the bad microphone placement made this an impossible watch
Thanks for commenting! I am very appreciate!
terrible material to transition in a residential home, strictly a commercial way to add a different material between both laminate and tile. did it strictly for education not because anyone would ever want their home to look like that
This is in my property, it's already over 5 years and I like it. Thanks!
Complete bs. Incapable of getting to the point.
What missing?