AFS: Kronotex Herringbone Laminate Installation
Вставка
- Опубліковано 28 вер 2024
- Discover a new elegance with Kronotex HERRINGBONE laminate distributed by Australian Flooring Supplies. A Kronotex HERRINGBONE floor is strong, beautiful and importantly - easy to install. Watch our instructional HERRINGBONE Installation video to guide you through your first KRONOTEX HERRINGBONE install.
I like the method to set all triangular(s) started from one wall. What happen if got a sliding wall line? Often it happened in old build. Where and how the adjustment should be made before carrying on the rest repeating effort? Thank in advance for advice
Is this kronoswiss herringbone?
I know somebody who's kronoswiss herringbone clicks when they walk on it, apparently the concrete floor underneath wasn't latexed/levelled beforehand? Would you recommend always levelling the subfloor first? And what underlay would you recommend? The back of the box says atleast 1.5mm which is what they used, a 1.5mm foam DPM underlay, also the instructions on the kronoswiss shows to glue the edges of the planks aswell?
Hi! Why is your offset line is exactly 94mm? Thank you
Do you have to have an equal amount of A cases with b cases
looks like a very square room
why the music..trying to concentrate on video its a great help but for the racket
Awesome that you've found it useful! You can mute the video to avoid the music :)
What if the walls aren’t straight?
thanks lots sir
When it measures 133mm for the starting triangle, should it actually be 113cm? 133cm is too far across
Should the triangle be even?
this is misleading, the first 3 triangle will end up with cutting the length of each piece of laminate floor.
What is the width of the board used in this video?
I’ve had kronotex for a few months now, avoid if you can, the amount of chips at the edges is ridiculous, not suitable for home flooring
Znsn
Hi! I’ve sent you an email
Hi Ben, I can't find your email - can you please forward it to salesaust@qep.com
Did anyone notice that the floor was not centered? Ya gotta offset the first triangle half the width of a plank.
Неправильное видео! Нифига он так легко не собирается, у него с 4 сторон замки
I only put one triangle at my front door then worked back down my hallway and into my living room, no problem and it’s easy to clip together…
"Mark out the offset" what is that mean... 2", 5"... from where? Please explain the step for non-pro. Thanks
Hi there, see the video at about 1 minute. Draw your centre line & the offset line is 94mm away from that. If you need anymore help please contact us on afscustomerservice@qep.com
You have made an error, the B and A wrong way round
Totally agree. Maybe the shot was in selfie mode, so flipped horizontal?
Edit
Not flipped, his watch is still on his left wrist. So definitely wrong!
Where can I buy that specific flooring
Hi
where the Glue was used ???
Can I do this with any laminate what not have A and B?
Hi I want to tile the floor with the ceramic tiles 200* 600mm using the herringbone design. The problem is the opposite walls are not straight they have a C-shape or in a form of brackets ( ). The gaps from the the walls are so great. Please help me out.
Thank you
Супер🎉 класс
Yea cos every room is this square 🙄
For the layman thinking they can do it themselves then call up a pro, oh could you finish our flooring, we started to lay it but haven't time to finish it 🤣..
you mean u can't do the hard bits.
Also looks of center tot me
Installed this floor today and found it very easy to instal, you just need to get in the feeling and you’re done before dinner.
LIKE COPIANDO
How can we buy this floor in Turkey?
Kafası baya işlek kafa
Approximately what is the waste % please
20%
Parabéns pleo trabalho muito bom, Brasil.
Hello sir .. i have a concrete floor is it ok to install with just cement or adhesive or i need to but something above the floor before the installation
BTW im speaking about the second floor of my house
100%👍✍😘
What’s the size of the tiles?
That music 😖😖😖😖
Nice
very good
I love your layout it will work the same with laying tile right?
What is the colour used for this floor? Is there like a colour code or something I can look for?
Hi Justin, it is Treviso Oak (D4764) www.kronotex-aust.com.au/treviso-oak.html
🏆🏆🏆🏆
Excellent work 👍
Hi, may i know if the shades of A & B are different?
Hi there, the A & B refers to the locking system only. Every install requires both the A & B of one colour for the click system.
Hi
I've just bought the exact same laminate. I have a fireplace so which way should the flooring lay as I'm not sure??
Do you find it’s creaky? Mine just got laid today and it’s so bad
@lauracovx
Is it laminate, hybrid laminate or LVP. ?
And does it continue creaking
Which color is it?
Hi there, it is Treviso Oak (D4764) www.kronotex-aust.com.au/treviso-oak.html
How much for feet
Hi there - you can use a conversion like...www.google.com/search?q=mm+to+feet+conversion&rlz=1C1GCEU_enAU893AU893&oq=mm+to+feet+conversion&aqs=chrome..69i57j6j0l4.4493j0j7&sourceid=chrome&ie=UTF-8
Great video! Just a question: in which case we need to use glue as I've seen in several herringbone flooring videos?
Laminate flooring is a floating floor, it has locking systems and no connection to the subfloor.
Do yo mean parquet flooring? Parquet is usually glued down on to the base with a urethane based glue.
That’s guys doing lvp it’s a glue down product
You use it on the end and sometimes with the starting triangles. Depends if the click mechanism works good. On the finishing end of the floor you could have a very small piece of flooring so you have to glue that to keep it in place. Click mechanism is too short to fit tight on such short piece. Hope I explained it clear enough, English is not my native language
I just bought this floor and it’s super creaky and squeaky? Like everywhere. The whole thing is creaky. Does anyone else have this problem? I feel like it’s where one end doesn’t “lock” into place which means there’s movement there. Pls let me know if anyone else has this issue?
Yes, me too, also the corners started to rise 😢
I'm doing a kitchen/dining room, with bay window, fireplace, not one straight wall to follow this guide
Amazing video great job thanks 😍
How much to fit this laminate??
This is really my favourite Channel!
Thanks for your nice Videos,
it is very enlightening,
Waiting for your latest update.
Drumsnab Parkette
Keep picking up boxes of wood like that and your flooring days are numbered 👨🦼👩🦼🧑🦼