Oh yeah they are bright for me..And yes they are bright enough I run 40w led on each side so total of 80w pushing out and the led around the headlights are bright too.. Don't get me wrong stocks are good too. But this new style looks nice.. For me ill stick with this new Vland headlights
Hooked mine up everything works all the lights work but daytime running lamps won’t cut on unless I turn the switch on on the dash any idea on what it might be ? because they should work on AUTO
I use the switch also to turn on the led bar around the headlights. During daytime. That's how it is. But only when auto lights for night will work but not day time unless u turn on your clearance switch during the day.
@@DaBoss86 unfortunately no u would have to have the switch on if you want them showing during the day... Your clearance lights . But at night when auto kicks in it will all light up
@@hectoraguilarii5503 . you plug the wire with the light bulb inside the housing wire and close it with the lid. then u plug the main wire to the outside of the back of the headlight
@@itzasrt i bought TypeS H7 6500k Ultra Bright White 1800LM Brightness 26w power max there ok I need more light in front of my car ahead on the road to see more ahead in front
H7 LED Headlight Bulbs High Low Beam Pure White Conversion Kit with, 80W, 12,000Lm, 6000K, 2pcs www.amazon.com/dp/B07RBVW63N/ref=cm_sw_r_apanp_LPGLI5oDYarsE
I had a bit of trouble with putting them on with the round ring clip where the bulb sits. I just lock it in there and I've been fine every since I got em.. Up to u if u wanna buy this or others
What led bulbs did you run ? I can’t find the right ones to work I keep getting only high beam bulbs that work.. All the dual beams I looked at have 3 prongs but my plug n play only has 2
@@UFOBradConcert yeah it don't. Only v8s.. I'm not sure what kind of wire is a v6. I've never looked at the difference. Are you trying to change the headlight or the bulb?
After using them for a bit do you think they’re bright enough? And would you rather have them or the stock headlights?
Oh yeah they are bright for me..And yes they are bright enough I run 40w led on each side so total of 80w pushing out and the led around the headlights are bright too.. Don't get me wrong stocks are good too. But this new style looks nice.. For me ill stick with this new Vland headlights
We just installed these today, but the light around the headlight that the new chargers have don’t come on on mine.
Did you hook it up to the marker lights wire?
There’s 2 cut wires on both sides and we don’t know if that’s what’s making it not work
@@itzasrt that is what it is never mind 🤣I have to order clips for those wires
Hooked mine up everything works all the lights work but daytime running lamps won’t cut on unless I turn the switch on on the dash any idea on what it might be ? because they should work on AUTO
I use the switch also to turn on the led bar around the headlights. During daytime.
That's how it is. But only when auto lights for night will work but not day time unless u turn on your clearance switch during the day.
Did the new headlights already come with bulbs ? If not which new bulbs did you get that fit the vland wiring?
Nope it didn't.
I went with H7 led...
You can probably find a different size
Yup only v8 models
So it was just bolts on? No other wire harness needed?
Yeah the bolts that hold ur light and plug and play. Nope no other hardness needed
do they still light up bright since you bought em and you must didn't get the ones you can change the colors on? I just ordered some
Yup they still are bright.
Naw the color ones looked low and thin.
Koo
did your headlights flicker? mine were fine for like an hour then the flickering started. i have the ballast that came with it
No they didn't Flicker
I just plug and play. Not using a ballast.
Since there LED bulbs
Did your car come equipped with hid’s?
Did you have any excessive gap between the headlight and the fender?
No I did not really. To me it's perfect.
Did you used a H7 led on it ? I have the same one, but it doesn’t fit ..
Yeah I had issues to but I held it straight and clip the round clip around it and it stayed for me.. Till this day no issues
Do you need to remove the front bumper to replace the headlight?
Yupp u do
What type of Headlight bulb do u need in order for it to fit correctly ?
I used h7 led.. if u go to vland website it will give u more details on there.. i think there's another one but I'm not sure what is it.
any advice if my turning signals won’t turn on
Is everything plug in good? I had to push hard on hooking the turn signals
Nice car and nice headlights
Thanks 💯
And are those halogen that you have now meaning did you convert them??
No its stock
Nice job 💯💯
😄😄😁😁🤝
So basically these are plug and play? My 2013 is hid already.
Yeah that's all I did
@@itzasrt thanks l, does the led stay on during the day automatically
@@DaBoss86 unfortunately no u would have to have the switch on if you want them showing during the day... Your clearance lights . But at night when auto kicks in it will all light up
@@itzasrt gotcha!! Damn wish that option was in there tho...
Did you have the projector version of headlights??....it says on there will not fit projector headlight version
I had the HID HEADLIGHTS.. STOCKS..
THE BULB IS A DIFFERENT SIZE.. I THINK I GOT h7 led bulb..
H7led i got in the new headlights
Where do I plug the H7 plug into after I install it in the housing ?
@@hectoraguilarii5503 . you plug the wire with the light bulb inside the housing wire and close it with the lid. then u plug the main wire to the outside of the back of the headlight
@@itzasrt i bought TypeS H7 6500k Ultra Bright White 1800LM Brightness 26w power max there ok I need more light in front of my car ahead on the road to see more ahead in front
Where exactly did u buy them from
What type of bulbs ?
I used H7 before you buy the headlights it should tell you the size
U didnt use the ballasts they come with?
No I didn't
We’re the factory hid headlights???
Yes
Do u got them on eBay ?
Can you give me the link for the light bulbs please
My bad bro. Didn't see this comment
H7 LED Headlight Bulbs High Low Beam Pure White Conversion Kit with, 80W, 12,000Lm, 6000K, 2pcs www.amazon.com/dp/B07RBVW63N/ref=cm_sw_r_apanp_LPGLI5oDYarsE
I had a bit of trouble with putting them on with the round ring clip where the bulb sits. I just lock it in there and I've been fine every since I got em.. Up to u if u wanna buy this or others
What led bulbs did you run ? I can’t find the right ones to work I keep getting only high beam bulbs that work.. All the dual beams I looked at have 3 prongs but my plug n play only has 2
I used h7.
U have a v8 ? Or v6
@@itzasrt What do you have to do to use LED on a v6?
@ADXBRAD I don't know what wires are on a v6.. I'm pretty sure there's something already made plug n play for led V6 to fit
@@itzasrt I saw another comment saying the v6 doesn’t have HID wiring?
@@UFOBradConcert yeah it don't. Only v8s.. I'm not sure what kind of wire is a v6. I've never looked at the difference. Are you trying to change the headlight or the bulb?