Elegoo OrangeStorm Giga 800x800x1000mm Huge 3D printer review
Вставка
- Опубліковано 16 лип 2024
- 00:00 Intro
03:32 Setup
05:53 First print 150% 3D benchy
07:25 Firmware updadte to fix the Z-offset issue
08:17 Clearance test
09:12 Tolerance test
10:22 Retraction test
11:24 Surface quality test
13:01 1mm nozzle Large test print (max out the 800x800mm print bed)
15:57 1mm nozzle PETG test print
17:35 1mm nozzle Large test print (max out the 1000mm z-height)
20:44 Pros and Cons
Affiliate links:
Elegoo OrangeStorm Giga 800x800x1000mm 3D Printer:
shrsl.com/4ll50
Filaments:
Prusa filaments:
www.prusa3d.com/category/prus...
$16.99 VOXELPLA Pro / PETG+:
bit.ly/3UhJpYS
Buy SUNLU filaments from official website:
bit.ly/sunlu-filaments
Eryone filament (PLA, PETG, ABS, ASA, TPU as low as $13 per roll, min 10 rolls):
auroratechchannel.com/links/e...
3D models:
Master Sword
www.printables.com/model/2889...
Oscar Trophy:
www.thingiverse.com/thing:145...
Honeycomb box with lid:
cults3d.com/en/3d-model/tool/...
Tolerance test:
cults3d.com/en/3d-model/tool/...
Robo Alpaka:
www.printables.com/model/4364...
Retraction test: Honeycomb box with lid
cults3d.com/en/3d-model/tool/...
Clearance test: Number slider
www.printables.com/model/2901...
Tolerance test:
cults3d.com/en/3d-model/tool/...
Robo Alpaka:
www.printables.com/model/4364... - Наука та технологія
Heck yeah Aurora Giga Deep Dive! Glad to see you updated to the latest firmware. Was told there is another update in the works to fix a few new minor issues. But really happy that extruder randomly crashing into the bed issue has been sorted
Thanks for your effort! I think they get a lot of inspiration from your videos. :)
Oh yes, brings back great memories of adjusting the bed height and burying the nozzle into the coating :)
The only time I have ever had an issue is when I had some crap under the bed. Oops.
You have to print a life size Aurora !
You are the GOLD STANDARD of 3D printer reviews!!! Keep up the GREAT WORK YOUNGN'!!!
The wheel idea is something that should have come as standard. Good idea for sure. Excellent review.
best review of the giga. no need for face time. seeing the machine is more important than the reviewer. more competent than other reviewers
Sigh.. scratching the bed on the first print is a right of passage for most printers.
@@Shinobubu seems to be on par with other reviewers. Was hoping they worked it out by now.
@@trugbilddrachen that scratch will be a constant reminder…!
I don't know about most printers, but it seems to have happened to many that have tested this printer.
@@maco8799 like a scar across the face. A reminder everytime you look in the mirror.
@trugbilddrachen yeah that's what I was hoping was less likely at this point.
I have no desire to watch any other 3D printer reviews; if you two beautiful people didn't review it, I simply wouldn't buy it. I hope the 3D printer manufacturers realize how lucky they are to have you!
aurora mostly get golden sample, if u buy base on their golden sample, good luck
Facts!!!
I miss the opening "todaaay". It's iconic. Great review as always.
Wow the two of you are incredible! Now I can print my grandkids their DC doll-house and castle super duper size. Thank you for the great service and effort you put into this keep the info flowing 💪
I absolutely love how you put the actual work into giving the most honest and unbiased feedback and reviews. Everyone should strive to match your work, you really are the gold standard! Please know that so many of us have really appreciated your hard work and dedication to giving us the knowledge base on what to buy and how to use it as well! Great job, can’t thank you enough!
You did not make a mistake by not connecting the filament sensor, the design logic needs to be reversed so that if the filament sensor cabling is not connected, it shows that the filament has run out. This is simple failure, logic design.
Your reviews are really well done, Thank you!
Congratulations on your success in getting the giant to work!!! As far as I've seen, you're the first reviewer to succeed!!! Eat your heart out, Joel.... hahaha. Another fine review! Well done!
❤❤❤❤ I love we are seeing some updates from the first round of testing to this one 🎉 good job @Elegoo
Now we just need an update on when backers will start seeing machines. 👍
They have been getting machines for a few weeks now. The biggest issue is because of the size and weight, it is taking 6-8 weeks to get from elegoo to the backer.
@@GaryTabarJr Good to know I was one of the early backers… I was hoping to see some sort of communication by now. But it is good to know it is soon.
@@MakerBees333 If you are an early US backer, you should be receiving it soon. I have had mine for 2 weeks, now.
@@erickraus1256 ❤️ I just got my e-mail, will be here in a week 👍
Love your reviews, thanks for sharing!
It could have been so good....but everything went cheap...I don't understand why they didn't design this around an enclosure since that is certainly needed. The location of that USB drive is really bad. You're correct - a machine this big will want big nozzles and some big flow rate. It's too bad they didn't consult with someone like Slice Engineering to put a Mosquito Magnum in there or the like. It'll be neat to see what the community mods this thing into.
It would certainly have been a good idea to have that as an upgrade package. Even at 2.5k it's very cheap for what it is, though that also opens up so many issues.
It would also have been really nice to get an option for a powder coated welded steel frame. Could have opened up the potential for speed quite a bit. For just a bit more cost in shipping
Great review, been wanting to see this printer.
Excellent review. As usual.
Hi Aurora - thats a massive printer, 31 x 31 x 39 inches, wow. Thanks for sharing with us. Always good work. i could see the potential benefit of multiple print heads.
YES I HAVE BEEN WAITING FOR THIS REVIEW AND IT DIDNT DISAPPOINT THANK YOU SO MUCH
Everything is always on point. Can't get enough!
As always nicely reviewed.. Interesting to see the size compared to full size you and your brother 😉
Great video. It was very good to see someone having good success with this printer. I always felt it had great potential if Elegoo could get past all the previous issues so many others have had. Even though i dont have room for a printer this big or the money to get it, it would be a lot of fun to print some big items on. Love all your videos and always my goto source for checking on Pros and Cons of printers.
What a great and thorough review! Thanks!
Glad they finally make 3d printers this big because now I can make that 24 inch 3d printable pipe wrench I always wanted to make 😀
finally elegoo Giga with our little angel Aurora 😍😍😍😍😍😍😍😍 i was waiting for this review , u did a great job to explain the entire machine . 😍😍😍😍😍😍 appreciated it was amazing . 🥰 the most beautiful part when both of u helping each other assembling the machine ..cuz all the printers that u reviewed before u were the only one who assembling them > great job aurora 💗 big love from Iraqi 3D print community 💕
I remember asking myself last week when you were going to review this printer 😅.
"Hm... Nice reviews, but what does Aurora think?" 😂
Another informative and excellent review!👍
I was waiting for this review
Great review as always.
Good points ❤
another thoroughly delightful video, Thank you.
Interesting thanks. Good for large sculptures, furniture and architectural geometries only a 3D printer can make.
HOLY MOLY That is huge!
This machine would be fun if you have a 3D scanner, sit down on the print beds and scan yourself sitting there, then print out a life-size model of yourself sitting on the machine, how cool wouldn't that be?
Thumbnail made me think you printed yourself with it haha. Interesting to see some of the same issues other reviewer had still exist, but also the fixes that were added.
I was hoping you would review this ☺️
Another superb review. Especially for bigger printers variable extruders would be useful if possible. Where flow rate adjusts with nozzle size adjusts with geometric detail and placement.
always very good explanation, i love your videos Aurora
keep it up
👍
Sounds like you had more luck than Joel. Great review as always!
With the number of fails Joel has I am not sure luck is the issue.
Thank you for your review.
I am certain KAMP would be the perfect upgrade for this machine.
Pretty sure the Neptune 4 Max uses KAMP, it just needs to setup in Fluidd.
Quite literally, every flaw of the Neptune 4 cranked up to 11. Good job, Elegoo!
What an awesome machine!
Amazing review. I just wish you were able to print the whole oscar statue to test the full z-height. Great video though
Great review!!! Of course I am a little jealous that you got such a huge printer but I think most people would be as well.
I am jealous that she has the space for it.
Aurora the brave ❤ - Repurposed a 2500$ printer as a sitting area 😊
3:15 ohhh I believe I've seen this! this is the one thing that makes this printer interesting to me
Great review as always :). P.S Thanks for reminding me to update the firmware in my Elegoo printer 😅.
¡Esto sí es una review! 👌👍👏👏👏👏👏👏💯💯
Eyyy! We see the kuya for the first time~
I've learned a new Filipino word: "kuya." Actually, he shows up randomly in our videos. :)
I was an early bird Kickstarter backer... we got them for $1250! That was a fantastic deal in my opinion!
Can’t really go wrong at that price lol
Its a monster. I would love to have one. No idea what I would do with it. I do a lot of prototyping and fixtures on my MAX and it is pretty nice.
For carboard spools one can print rims to support the edges
Based on my experiences with my RatRig V-Core 3.1 500 I would say having 5k acceleration on this huge printer is very respectable. I don't use more than 5k accel for printing moves on my 500x500x500 printer either. I use 10k for travel moves. Setting it for more seems to lead to occasional missed steps.
Elegoo seems to have used a thicker and stiffer gantry for the X-axis than the V-core stock one but that makes it heavier too. So it is a fight between having enough spare torque on the steppers to overcome at least slight drag of the nozzle on imperfect print while at full acceleration on one hand and having stiff enough gantry to avoid forcing the input shaper to modify the acceleration too much on the other hand. I would say Elegoo did a decent job here and got a good compromise for such a huge printer.
8:05 I wish Elegoo makes the SD card reader more accessible to the bottom or the top of the panel instead of cracking the panel open.
12:02 20,000 mm per second? I would like to see that in action!
14:40 I guess I was expecting more for something at 1mm nozzle. Shows how much I know about 3d printing.
19:07 Is that a Grammy?
17:38 Ah, it's an Oscar. I forgot that a Grammy looks like a record player. Ooops.
Thank you for your thorough review. Your upclose shots are very informative. Really nice editing.
Just a question: Do you have an airfilter/ air purifier in your garage for all your printers?
Thank you so much 😀
No, we just print PLA/PETG most of the time, when we print ABS/ASA or PA-CF, we will use a fully enclosed printer.
Another great and extremely thorough review. No one does it better and I really like the pros and cons lists you do for all of them. I think Elegoo released this too soon and really made some poor choices for hardware and setup. It should have had a top of the line hotend and there is no way a printer with this large of a print bed should have to be manually adjusted with set screws. That is unbelievable to me with all the other printers being entirely automatic for both the bed and Z offset. At this price point of $2500 there isn't much excuse for that. The components they are using are certainly not top of the line and other than the frame itself, I think the design choices are very lacking. I was so excited when I first heard about this printer and they hype certainly doesn't match the end result. I would never pay this much money for a printer with manual bed and Z offset. I am not an Elegoo hater, and I do like many of their other printers and their Rapid series filament is awesome.
So much for info..Tronxy VEHO series has larger 3d printers
Greate review as always.
But is the belt at the head, realy hold together with zipties?
WOW...i need this printer....and i don't know why!
This Oscar should have been printed with a gold silk PLA 😁😁😁
Support for AMS-like multicolor addons like CoPrint would be great for large object continuous printing using just regular 1kg spools instead of large ones.
You need to get tronxy3d to send you guys one of their veho800 to review
This is cheaper than a prusa, amazing 😂
Great Job as always. I was nice to see more of you also and it helped to scale the size of the printer. I wonder how would you rate this printer. i was a bit supprised when this came out as I am in the process of making my oun for a project I am working on and now seeing this review i wonder if i should just buy this instead. I spent 2700$ for my Phrozen so i think this is a steal and I am sure i can make adaptations . Say hello to your brother as he seems to enjoy much of the hard work. I had a different idea to increase the speed of this printer but we will see if they take you advice. They are out of stock by the way so if you ever want to make room and sell this i am interested. have a good one. Looking to hear your rating. You are Aweson as always. Thanks.
I always say to manufacturers "send to Aurora". What's next? Tronxy Veho Pro 600 v2 (klipper). 800 version will be much later.
👏👏👏👏
interesting choice in doing 4 printbeds instead of one singular big one.
Was wondering if you were going to do a review. Gonna need another garage for that one plus your others.
Hopefully they work to improve the unit. Curious if a super volcano or a higher flow hotend would really help.
Well, now she has a printer that can print a garage!
@@Graham_Wideman lol
I was not expecting the tolerance test to do that well lol
0:27 You know its a massive printer when she sits in it lmao
11:21 FYI Bottom Half of the screen has incorrect printer names
If it can do 30mm3 with a 0.4mm nozzle, switching to 1mm nozzle could have dome much more flow i would safely assume 45mm3 or more.
Was there a first layer sheet? Did I just miss it? That’s the main thing I was looking forward to seeing lol
Great review! Do you have a link for the furniture movers that you used?
The quality of the furniture movers is not good; they are just some unbranded, cheap products from Amazon, and I wouldn't recommend them.
Alright, noted. Thanks!
Your honeycomb box looks _tiny_ on that monster!
Great review as always! 30mm³/s is rediculously slow for this kind of printer, especially using a 1mm nozzle. Have you reached out to Elegoo?
No, but they will realize that after they watch this video.
1.5 hours to level and calibrate the printer? lol Good job Elegoo!
I'm getting a 404 on your eryone affiliate link going back to your website, and don't see a reference to affiliate links on the site. Wanted to try high speed filament and figured I'd try eryone since you use it a bunch, would love to purchase it in a way that benefits the channel for all the great work you do.
Pls place the white oscar print in the background as Decoration for future videos :D
I have always thought that input shaper should be measured at multiple heights, let's hope this becomes standard.
If the 1mm nozzle maxes out the flow rate then I assume a 0.8 nozzle would print in the same time with a better quality.
Forget the Hello Kitty army, time for a Helios Kitty army! 🤣
Actually, I think they should slow down heating of the bed. At least for 115V. Going near the limit of the power you can get from one line isn`t great. Alternativly they should use 3 phases to connect the printer to an outlet for ovens. At my home (in Germany, so 230V) renovating my kitchen I actually used a Perilex plug for my oven (Perilex is a 3-phase+neutral+ground connector for 3*16 Amps, esp for ovens) to be prepared for the future. Even it means to buy takeout food for a few days on a big print, this might be better than to overload your electrical system.
For 1mm nozzles: Imho there is one function missing on all modern slicers: Different layerheight for outer layers. Why isn´t it possible to use 0.6mm layerheight for a print, but with printing outer layer first with a layerhight of 0.2mm for theese (so the printer would print 3 outer layers on top of each other, with 0.2mm laayerheight each, than the inside of the object with 0.6mm). This would increase the printing time only for the outside perimeter. But as you only can see the outside layer afterwards anyway, this should improve the quality by a lot. Combine this with variable layerhight to get more detail at the top, and you would get great results with only modare increased printing time.
Also this printer definitly needs a toolchanger. Not (only) for multimaterial, but for different nozzle sizes. If - for example - you print a landscape, print the bottom with a big nozzle, but change the nozzle if you go upwards for more details.
For the design of the printer: It should be more modular. The base, the top, left, right and back side should be made as seperate parts with each having a few thumbscrews (and of course plugs) to connect them together. So you could assemble and disassemble the printer in maybe 20 minutes (+calibrating after assembly). A printer this size does not fit through normal doors.
The slicer suggestion for different internal and external layer heights would be so good! Great idea! Hope someone implement it in the future soon!
Aurora you should print a giant lithophane.
For big prints this printer would benefit greatly from finding out the actual limits on max flow and acceleration
The orange storm giga just isnt ready yet if it cant go slow and max z height without soooo many artifacts is that the real max z height
It's getting to be, how big is to big? I saw the video and with. the clips of you sitting in the printer, that was funny. I know you are not a very big person, but that printer is huge, though, there are bigger ones available at a significant price.
Dave
Have you printed anything else big yet? Giant Claymore? an actual bench? gigantic cali dragon?
Flying Bear Reborn 3, Clipper etc is out
they should have had it have multiple nozzles that can get swapped out, and they needed to have tandem printing in the base modelf or them to have a reasonable upgrade path. to have multiple nozzles able work on the same print they would need the nozzle area to go toward 6 axis, instead of 1.
if instead of having a sqware top, they were able to rotate the top, and dropped the head like a crane with a magent underneath the print bed, they could have had a clean and easy upgrade path, but it would cost way more to tack that on after the fact. so i call BS on them upgrading it instead of making a model 2.
for customer facing product, you need to make the upgrade path be accessible to the largest portion of the public. once you get near the level of expertise that they would need to be able to design the product to use it, sales fall off.
Why no mains powered beds? Also 30 cubic millimetres per second is pretty bad if it doesn’t increase with really large nozzles. That’s something I’d change in the settings to see how far you can push it. 60W is pretty small too, considering a 70W heater will fit in a normal V6 heater, let alone something like a volcano.
My Cura does not have the volumetric.
Was the pei damage in the beginning your mistake, or the calibration settings?
small spelling error at 11:22 "Prisa XL" should probably be "Prusa XL". nothing major though, great video!
Tronxy has a competitor 3d printer in the market.
It’s cool but I don’t think anyone should buy one
It just feels like an unfinished product and there’s definitely an early adopter tax. I can’t really think of too many applications where a single large piece would be a requirement that a non giga-sized printer couldn’t handle.
Now that this thing has shown up, who has to leave their car outdoors from now on? :)
Whats next a 800x800x1000mm Resin Printer by Elegoo YellowStorm Terra? comes in 2x skids . I can finnaly build parts for my EV yeah
Speed doesn't bother me too much, it's driving the nozzle into the bed that bothers me.
17:10 30 mm/s*
5 kg rolls mandatory, should come with a warning: Will eat all of your printer chow.