I had the same problem with this *SAME Otis Series 3* located in *The Sultan Hotel, Lagoon Tower* in Jakarta. Same chime and the microwave beep. The 90's Series 3 (which I loved) is aging into a near to its end of lifecycle.
@Le\7els inc. that's more like it. I was almost trapped in that elevator when the elevator suddenly stopped between the 3rd and 4th floor traveling from the lobby level, then safely returned to the 3rd floor. 3 out of 5 elevators in the bank was modernized by a generic South Korean elevator manufacturer.
I have ever encountered this kinda glitch quite a lot. It usually happens on Otis series 3, when it travels to long in one ride without stoping, it happens. There is a Otis series 3 near my home which serves 38 floors in total. When it travels more than 30 floors in one ride, this happens. Hope this will help you, DieselDucy
It looks like a safety feature called "Normal Terminal Stopping" or something similar was triggered. This feature ensures the elevator car slows down before the terminal floor. If the speed is over the limit when approaching the terminal floor, the controller will force the car running on inspection speed immediately. If the speed still not decreasing, an emergency stop will be applied.
That malfunction either reminds me of your MPG videos with the famous Dover lift or your video at the Jewish Hospital in St. Louis, Missouri, where lift #15N got stuck up at the penthouse (at the time)
I think I encountered something similar at another hotel. It was a Westinghouse. I selected floor 25 but the elevator jolted violently on the 20th floor and then travelled DOWNWARDS to floor 10 and then continued its way to 25. I still don't believe it
i think what happend was a power outage for one second. Let me explain. so theres a power failure. and the city(Or building) switches to a backup power. And the elevator detected that and stopped
I think maybe it activated the brakes while transitioning from high speed to low speed, so goes high speed -> stop -> low speed -> stop instead of high speed -> low speed -> stop.
I have lived my first stuck in a same Otis and I saw how it restarts live,mine shows the "- -",goes basement/ground faster than it's speed thrice and finally goes to the last memorized floor,what makes it even more awesome!!!!!!!
john leininger There are to switches Limit switch and the real overrun switch As far as I heard, If the limit switch hit, it means the lift is in the toppest floor, sometimes the lift could be out of sync with the controller. And it corrects itself..... and the overrun switch virtually kills the power.
It was the door rollers getting hit to the point it unlatches, this is common on most Elevators/lifts which have GAL or Euro and maybe asian style euro rollers too? But yeah it's pretty common but it's something not to worry about, just hope it doesn't jam into the outter door and you're good.
Elevators aren’t perfect, things like that can happen, and that was a one time thing. I’m sure those are perfectly fine just the way they are! They look very nice
I had to delete a few of the "first" comments due to the amount of drama it caused. "First" people will just continue to do to say it, who the fuck cares? It's not like this is a paying job to stop them, JUST IGNORE IT. I'm pretty sure there's something better to do and to be more respectful rather just saying "Nobody cares"
So diesel juicy your favorite elevator is Dover or my favorite elevator is Otis it's cool it's so cool how we like elevators they're so fun 😀😀😀😀😀😀😀😀😀🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗 because I live in salt lake City 🌆 🛗😎😎🔒 and the McDonald's lock 🔐🔒 I like that big gulp video it's 🤣🤣🤣😂
This elevator is not bad. Look at the elevators in China. Many people die in those elevators. Those are elevators from hell. My rating for this elevator: “B”.
I had the same problem with this *SAME Otis Series 3* located in *The Sultan Hotel, Lagoon Tower* in Jakarta. Same chime and the microwave beep.
The 90's Series 3 (which I loved) is aging into a near to its end of lifecycle.
@Le\7els inc. that's more like it.
I was almost trapped in that elevator when the elevator suddenly stopped between the 3rd and 4th floor traveling from the lobby level, then safely returned to the 3rd floor.
3 out of 5 elevators in the bank was modernized by a generic South Korean elevator manufacturer.
@@theAdamAronggear it returns to the last floor is safely stopped at.
Ghyuuuuiu
Has that Microwave beep that I love sm!!
I have ever encountered this kinda glitch quite a lot. It usually happens on Otis series 3, when it travels to long in one ride without stoping, it happens. There is a Otis series 3 near my home which serves 38 floors in total. When it travels more than 30 floors in one ride, this happens.
Hope this will help you, DieselDucy
That would be scary if that happened on an elevator that was going 1400 FPM!
Ok great, I live on floor 31
Sounds like the clutch clipped the lock coming into the floor and caused a safety circuit break.
Shouldn't that be AN elevator?
@@kenrutherford1109 All elevators have this and without it the doors won't be able to open
I'm wondering if something tripped the elevator when the elevator did that weird thing.
The elevator stopped at the 24th floor
Probably a safety break with something in the shaft
It looks like a safety feature called "Normal Terminal Stopping" or something similar was triggered. This feature ensures the elevator car slows down before the terminal floor. If the speed is over the limit when approaching the terminal floor, the controller will force the car running on inspection speed immediately. If the speed still not decreasing, an emergency stop will be applied.
that moment when the elevator takes an extra 5 to 15 seconds to open 😱
Hate this!!!!!
That malfunction either reminds me of your MPG videos with the famous Dover lift or your video at the Jewish Hospital in St. Louis, Missouri, where lift #15N got stuck up at the penthouse (at the time)
I think I encountered something similar at another hotel. It was a Westinghouse. I selected floor 25 but the elevator jolted violently on the 20th floor and then travelled DOWNWARDS to floor 10 and then continued its way to 25. I still don't believe it
Sounded like the 2nd one did the same coming in.
It seemed to arrive at floor 24 rather fast without slowing down like it did in the rides to 24, maby brake kicked in because of the speed of arrival.
1:52 - there is a fire alarm sounder in the lift?! Haha that’s rare
1:05 got stuck and doors opened
Yep
Probably it went to the inspection limit switch (which stops the elevator from going up)
i think what happend was a power outage for one second. Let me explain.
so theres a power failure. and the city(Or building) switches to a backup power. And the elevator detected that and stopped
I think maybe it activated the brakes while transitioning from high speed to low speed, so goes high speed -> stop -> low speed -> stop instead of high speed -> low speed -> stop.
I love the outside indicator!
It's called an Annunciator
@@daganiojacob18 no it’s not
The worse malfunction in in my Mitsubishi
The lift just slow levels at some floor while going down.
4:57 I think one of the other elevators did the same exact thing
I assume I saw those. I like the indicators very much!
It didn't slow down initially.
I wonder if it hit the doors and tripped the door safety?
If not, it must have been a relay fault.
Or even the elevator may not welcome the visitors!!!!!!
At 0:55 It skipped the 13th floor
most buildings dont have one
Did it hit the top of the shaft???
These elevators REALLY need an upgrade
Mine has experienced two times with elevator crash like this. All of them are happened in Hyundai elevators
I love elevator malfunctions. It means something interesting is going to happen
I have lived my first stuck in a same Otis and I saw how it restarts live,mine shows the "- -",goes basement/ground faster than it's speed thrice and finally goes to the last memorized floor,what makes it even more awesome!!!!!!!
Mean
Lucas Nassar
Scaryyyy!
And imagine just being on that elevator with that little bump part that happened in the end
LOL yeah.
There’s no 13 floor. Why is that?
I like the scrolling directional indicator
Look at the button and the directional lantern in the 24th floor
Yep
Are Those Otis Like At Luxor In Las Vegas?
in Norfolk.
prob was a hard brake
I don't know what it was.
That is very odd, maybe it hit the floor switch in the shaft late and the emergency brake went on.
Limit switch right? Yeah makes sense because it’s anyways the toppest floor xS
if it hit finals the power to the motor would be cut
john leininger
There are to switches
Limit switch and the real overrun switch
As far as I heard, If the limit switch hit, it means the lift is in the toppest floor, sometimes the lift could be out of sync with the controller. And it corrects itself..... and the overrun switch virtually kills the power.
@@beedslolkuntus2070 good to know
The indicator on the thumbnail kinda looks like a Schindler 5500 Black Linea100 floor indicator
It overshot the floor secretly!!!
has to be something with the door operator look at the door speed when you board and when it opens from that point on its stupid slow
Why did the Elevator Jolt At 1:07?
Not sure
It was the door rollers getting hit to the point it unlatches, this is common on most Elevators/lifts which have GAL or Euro and maybe asian style euro rollers too? But yeah it's pretty common but it's something not to worry about, just hope it doesn't jam into the outter door and you're good.
the lifts at my university are always malfunctioning
Don't tell me u died.... How can u if u did but. ... Pls, ima having a ptsd breakdown watching elevator deaths
Well then again, that elevator does look like it’s in horrible shape
These "new cabs" (I hate to admit) look like they've seen better days and look a lot older than anything new, at least within the last 5 to 10+ years.
Nathan Andrew Davis They might have used this old architecture for a reason. Unless you mean that it just looks old in general and needs cleaning.
Where is this? I love this elevator so much! Even tho I have never ridden one with series 3 fixtures I so badly want to ride one!
To see the real *weird elevator malfunction* go to 1:05 and listen close.
Thank me later.
Fahri Adam Aronggear-Adamy I cant here anything
Le\7els inc. but he said listen real close so
Dieselducy did the elevator overshot the 24th floor and hit the top of the shaft?
That elevator seems just fine and dandy to me
Lol. Yea it is 😂. Good to see you Dan.
0:56 Why did the indicator skip the 13th floor?
Well hotels have said that the 13 floor is known for bad luck so many hotels don't have a 13 floor
Many buildings in general don't have a 13th floor
Are those touch sensitive buttons?
Yes they are
I have had that happen a few times to me 😂
The elevator lift, might have hit a roller
Up slowing limit didn't activate I assume.
It happens from time to time, I couldn’t think of a reason myself why it happened.
The exact same thing happened to me _twice_ in July on *TWO* different elevators (not here, elsewhere). I even caught one on camera (yet to upload)!
Notice that their was no floor 13
What in the world happened to this thing?
Not quite sure
Really weird how the elevator glitched like that. I wonder if it tripped the safety governor
It Probably hit a roller.
Elevators aren’t perfect, things like that can happen, and that was a one time thing. I’m sure those are perfectly fine just the way they are! They look very nice
The lift probably hit the roller causing a safetybreak.
My kingdom to see one of these.
Update: These elevators are getting modernized
I have heard that. did they start yet?
@@DieselDucy yes
I like how he calls it a car lmao
Well, that is its name.
Otis Series 3!
If the hotel is spending a lot of money on the renovation, then they MIGHT modernize the elevators!
mod is a great way to fix that malfunction.
@@SamSitar And ruin the character of the elevators, as well as make series 3 even rarer, especially in the touch sensitive form.
I think this is An elevator in Vegas
Probably the elevator hit the roof on level 24
it reset itself though.
Also @@DieselDucy Why did you not try to send down that lift when you wanted another?
Might’ve been an over level
0:55 whyd it miss 13
13 was skipped due to superstition.
@@TheDash456 well happened to the elevators at my building before
valerie studios It happened at your building too???
@@TheDash456 yes, with floor 10
What an EPIC FAIL
I had to delete a few of the "first" comments due to the amount of drama it caused.
"First" people will just continue to do to say it, who the fuck cares? It's not like this is a paying job to stop them, JUST IGNORE IT.
I'm pretty sure there's something better to do and to be more respectful rather just saying "Nobody cares"
The OTIS almost died
Fire alarm in an elevator!
Some people are so weird, why skip floor 13? It's just a number.
Jason G because it is considered an unlucky number in many traditions
13 is lonely ☹️
It's like Charlie and the glass elevator (sequel to Charlie and the chocolate factory) 😂😂😂
Yep the car went out of the whole shaft
The 13th floor is missing
I dont no why missing
Most buildings and as far as I know cruise ships don't have a 13th floor, and that's because it's bad luck in some traditions. (superstition)
crappy doors lol
jolt probably pushed the doors slightly off.
One of my TK's it does like a loud click to open doors
I want to ride elevators with you I like that stuff check them out you know what I mean go over the us
they must be superstitious, there was no 13
And sometimes superstitions doesn't have to believe,it happens even without we know
Woah me too 1:20
So diesel juicy your favorite elevator is Dover or my favorite elevator is Otis it's cool it's so cool how we like elevators they're so fun 😀😀😀😀😀😀😀😀😀🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗🛗 because I live in salt lake City 🌆 🛗😎😎🔒 and the McDonald's lock 🔐🔒 I like that big gulp video it's 🤣🤣🤣😂
Thanks!
This elevator is not bad. Look at the elevators in China. Many people die in those elevators. Those are elevators from hell.
My rating for this elevator: “B”.
Definitely
BIRB
You're not alone, the similar incident also happened when I take this new lift:
ua-cam.com/video/dfM0IQt2FKo/v-deo.html