How To Install an Aussie Locker - Ford 9 Inch
Вставка
- Опубліковано 5 вер 2024
- Follow along as I install an Aussie Locker in a Ford 9 inch 3rd member.
www.torqmaster...
Dial indicator and magnetic base: amzn.to/2UVvdG5
#aussielocker #lunchboxlocker #bleepinjeep #ford9
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on UA-cam: bit.ly/2wGeSec
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
09521
![Building a Ford 9 Inch Rear Axle (The Easy Way) #JuiceboxBronco [EP10]](http://i.ytimg.com/vi/34QWKF8Nfu4/mqdefault.jpg)
Excellent video, lots of detail, great lighting and easy to understand. One thing we would add to the video is to check the center gap between the two cam gears. You can do this using feeler gauges through the cross pin hole. The gap should be between 0.145 to 0.170. We rarely see Ford 9" differential case inside dimensions out of tolerance, but it can happen. The center gap needs to be within our specs for proper locker function. If it's too wide, you can shear the 4 dowel pins. If it's too tight the locker will ratchet hard.
Great video, very well done, and informative. I don't even have a Ford 9" or plan on installing Aussie lockers but I enjoyed watching it.
Great video Tim. Can’t wait to put lockers in my XJ. It’s my first Jeep and I learn a lot from you Bleepin guys!
It’s a Bug’s Life - Nice looking XJ Bug!
Hard to find a XJ in that shape these days! Especially back East
Very good that you work on a terry cloth bath towel. Few do. Few realize that it prevents dropped parts from flying everywhere.👍👍
Exactly what I needed to see. Gonna swap a spool out for a Grizzly in my Jeep.
Great vid, as an Aussie, I feel like I should do a public service announcement, it's always pronounced "oz e" with a "zee" sound not an "s" , cheers mate
I wrap the ring gear in foil and throw it on the grill...no complaints from your spouse then about using the oven. Great video, Tim!
Great video! Love how adjustable the Ford axles are
How does it handle being locked in the rear now? Could we get a follow up video reviewing the front and rear locker? I've got my TORQ locker installed in the front, still open diff in the rear.
I’d like to see a review on how you like that locker on a daily driver in about 6 months. Considering getting one of these and I’d like to see how you like it
I have one in the front and rear of my XJ, love the rear- doesn't bother me on road, but hate the front when on trails...
there noisy,on road,turning,.but good & cheap option..
It is good practice to mark the exact relatiinship between the drive pinion and ring gear teeth. Some ratios change randomly. Those devisible by .25 ratio 3.00, 3.25, 3.50 etc) are repedative in the gear teeth touching and have a common wear pattern.
FINALLLY!!! Good Job Tim! Your XJ should be a lot more capable now.
Yes. Like dry pavement donuts!
Definitely like the video getting ready to change gears and Locker in my 9-inch Ford four wheel drive van going lunchbox on it I like how they handle. And we have four and a half miles of Goat Trail just to get to the main road year round
bit noisy,but volume helps.
Great video. Even suffered through the super long annoying ads for USB powered smoothie blenders that aren't at all shaped (and colored) like personal massagers. I was thinking about using one of these in my CJ7. Love how simple they are.
I haven't seen that ad yet! Thanks for watching.
You should have put a mark on the side adjusters. It helps get them back to the same adjustment. Mark where the lock tab goes In to the adjuster hole.
Don't use red loc tight on any of the bolt, if you use any just the blue stuff. You have to use a torch to get Red loc-tight apart.
Great review. One concern, when using the zip cutoff wheel, much of the debris went right into the right hand bearing. Also, it's a good idea to use "assembly lube" as it will turn into a liquid vs. grease. They use it often when building automatic transmissions. Thank you for the 9 inch video.
I cleaned the bearings off camera after doing that. Not everything makes the final edit (like tightening to torque specs) for the sake of time. Good assembly grease tip. Thanks.
Tim is a great guy and I enjoy his videos.
I realize that even your jeep has problems with the snow just like mines. Now I don't feel bad for my heep 😂
4 chains.
Very nicely done! 😎
Well I hope you washed all them metal shavings out of your bearings! Nothing like all the Sparks from the grinder going right on them! I would at least covered it up first.
i did shout at the screen,to no avail.
Well made video thank you!
Tim should invest on some brass punches.
Agreed. - Tim
Good timing, getting ready to set up my father in laws bronco woth a locker and gears. (Give me something to pull out of the woods with my jeep lol)
Great Video Tim!!
Keep up the good work ... this is my goal ,full locked small tire . Do us a ride and drive review
Great video. I love Torq Masters products!! Great company!
Nice video, now I REALLY want to do a 9in swap!
Great video Tim, install look's easy!
It is!
Right on, Tim. Can't wait to see how it does in Moab and other events this year. Now you're going to spank Moab Rim! Let us know how you like the locker for a daily driver. Randy.
I drove by Tim and the green machine in town the other day, I would’ve Jeep-waved but I drive a Tacoma these days
I don't care what you drive! Toyota's are rad too. Say hi next time!
It's interesting that even though it's only 2 spider gears, it's still a fully enclosed carrier and not windowed on the sides like toyota 2 spider gear/2 pin carriers are.
Surprisingly suzuki's little baby thirds are all 4 spider gear/4 pin carriers with the center block, like the heavy duty style you mentioned. I just pulled one apart the other day to lincoln lock, they're basically a 1:2 scale version of your carrier setup.
Very cool!
looks like it had hole for 4 pin,but,its a 9",better than a 12 bolt chev garb.but because of the semi,single bearing,i go d60,allways.especialy with 35" +... A d60 is half price of a 9",& twice as strong.
Thanks for the great video! Is this the same for 31spline ford 9" axles?
So when is the review on the road manners?
good video but you forgot to adjust the pre load you were talking about and the bearing is toast
Good job keep up the work
How the rearend holding up?
Exelllant how to👍👍 Thanks! Ron1, Littlewierdjeep
Great video 👍 but ugh save your coin and get a ARB if you play in the snow😀
Why so?
@@bleepinjeep side hilling brother 👍
Ooo yeah, lol. Things could get a little wild. Sounds like a good video.
Hey Tim!!
In your opinion is the Aussie locker the best brand of this type of locker ?
I haven't tried every style of lunch box locker but I've had nothing but good experiences with Torq Masters/Aussie Locker. Easy to install. Good instructions, good road manners, 100% lock up offroad when you need it, and relatively inexpensive. Both made in USA!
detriot the best,any lunch box is o.k.,cant understand why,me being ausie,its an ausie locker ,made in u.s,shouldnt it be armana locker,or mytag locker,??.
Hey tim how have you been liking the front and rear lunch box lockers with driving in the snow on the road?
The front locker has been really good on icy/snowy roads. No real issues, you definitely know it's there but I've been up to about 60mph on a curvy stretch of freeway in 4WD on plow packed snow and did just fine with traffic.
No icy roads with the rear locker yet.
Good to know! Thank you for the response. Jeep is looking good to!
13:25
GEEZ I cant believe you threw grinding chips into the guts and bearings. Can you really clean it all out ??
That’s what she said.
To more easily expand that ring gear, put it on a baking sheet and put it in your oven...just don't let your wife know ;).
Nice job Timmy!Now your locked front and rear?
Yes!
how much did u preload the side bearings if u did i missed it
Not much. Just good and snug by feel. It'll be fine!
@@bleepinjeep ok
Whats with backlash. Im new to trucks so why do we need it and is there gonna be problems if there is any backlash.
Parts expand when they heat up. No backlash, they get too tight, too much, they are loose and can make noise and howl etc Damage will occur and life will be less without proper gear alignment. There's also the pinion depth to set which he didn't need to do in this operation. If you don't get the numbers right, you will have an improper setup that will come back to get you..
4 - 8,thow,is good,10 is max,less than 4 it will heat up & blow,.YOU NEED CLEARENCE FOR EXPANSION, go feel your diff after driving to the shops.!!!...NEVER,drive thru water with hot diffs,they suck in water.!!.BANG.
I run a early bronco 9inch, what year is yours? Do you run spacers?
Its from a 1978 F150 and it's full width. Definitely no spacers. It's very wide under the XJ but I like it!
I need some advice. My 1990 xj is on a 3 in with 32's. My fuel pump went out and I replaced it complete with sending unit. I was getting about 12 mpg and now only 9 mpg. What happened? Any advice is appreciated.
Try checking your fuel pressure regulator and fuel rail pressure. On the renix its pretty easy. I assume youve got a new fuel filter in there as well. Without an obd the renix is pretty much, "runs smooth?" Good enough!
@@Jv977 yes it has new fuel filter. It runs perfect still, plenty of power and and acceleration. Nothing is leaking, no gas smell anywhere. It has a 13 gallon tank and went from averaging 200 miles a tank too 130 miles give or take a few. It's just weird that it all seems great except the numbers. I will check what ya said and thanks for hitting me back.
@@stephenhickman9502 Its tough to diagnose a fuel mileage problem when the engine seems to be running okay. Try and flog it a bit and see if you can get it to show some symptoms. It is possible that you have a vacuum leak somewhere and the engine is compensating for it. Get a propane torch, leave it unlit with the gas on and poke it around near any vacccum connection, listen for engine rpm change. You can also do it with carb cleaner but not as safe. Heres the bible for renix engines: cruiser54.com/ hope you get it sorted out soon.
@@Jv977 thank you. I appreciate your help.
SELL IT.!!!
No safety squints today? 😂
so the brand "lokka" aussie made an owed got ripped off by this
I'm not sure who came up the design first, but yeah they're pretty much the same product....Spartan lockers are another brand like these
Torq Masters owns/manufacturers Aussie Locker.
no wheelin to test it lol
When using a wheel of death you should really wear a face shield.
It's Ozzie bro, Ozzie not Orssie.
Put the shield back on your grinder.
No
aaahhhggg,you ground bits into the bearing,uuuuggg,,,
And then I cleaned them off camera. I could have done that better though you're right!
Great video Tim!