Ultimaker S5 Pro Bundle Overview
Вставка
- Опубліковано 22 сер 2024
- In this video, 3D Universe gives you an overview of the Ultimaker S5 Pro Bundle, a unique production solution that, by taking the hassle out of 3D printing when using an extended range of materials, gives busy engineers and designers more freedom to focus all day on doing their best work.
The Ultimaker S5 Pro Bundle is made up of three breakthrough devices:
1) The Ultimaker S5 - the award-winning, composite-ready dual extrusion FFF 3D printer
2) The Ultimaker Material Station - a 6-spool pre-feeder with humidity control that automatically switches between materials
3) The Ultimaker Air Manager - a top enclosure with a material-matching adaptive EPA filter
Be sure to check out our Ultimaker S5 Pro Bundle Unboxing and Setup video here: • Ultimaker S5 Pro Bundl...
For details about the Ultimaker S5, check out our overview video here: • Ultimaker S5 Overview
Important Note: Be sure to update the firmware on your Ultimaker S5 to the latest available version before installing the Air Manager and Material Station.
To learn more or to purchase, please visit shop3duniverse....
Or, if you already own an Ultimaker S5 printer, check out the Ultimaker Pro Bundle Upgrade here: shop3duniverse....
Ultimaker, PLEASE make this improvement. When trying to diagnose a filament JAM, it would really help to use CLEAR plastic when manufacturing the following parts; In the Material Station the Merger's should be clear plastic, not black. BTW, the merger should be called a manifold. On the back both Decouplers should be clear as well the cover for the #1 and 2 stepper feed units also clear. We should be able to view the filament throughout it's path without having to disassemble anything. This is a simple request the injection molds don't care if you use White or clear, for your next production run just use clear.
That’s a really good suggestion! I shared your comment directly with my contacts at Ultimaker, so I hope they’ll consider doing this.
@@3duniverseOrgWelcomesYou thank you,
we can lead a company to water...
Great overview. Now I know I need to add this to my S5.
That was outstanding!!!
can it use materials other than ultimaker brand? aka cheaper alternatives?
wish I could even afford the s5 :(
How much is it?
@@supremeloco1532 $9550
If you have 5 PLA colors loaded, can you swap them (during the print) by specifying that somewhere in the .gcode?
Not currently, no. The basic printing capabilities of the Ultimaker S5 are not changed by the Material Station. You're still limited to printing two materials/colors at a time. So you could install two of the AA print cores and do a print that includes two different colors oof PLA (by using two separate models and assigning one color to each model in the Cura slicer), but you would not be able to do more than 2 colors in one print.
That’s too bad. It would be cool to do five color prints some day! Thanks for the info 👍
I am new to 3D printing but have a relatively simple design that requires 2 different materials but would like to also include water soluble structural support for each. If I were to load material 1, material 2, and 2 spools of dissolvable filament each running to different extruders could I make that work? Basically when Material 1/Extruder 1 is used it would access Dissolvable Material from Extruder 2. Then when it used Material 2 from Extruder 2 it would access the other spool of Dissolvable filament feeding through Extruder 1.
No, that is not supported. You can only print with two materials per print - one for extruder 1 and another for extruder 2. So you could do either a single color print with PVA supports or a two-color print without PVA supports.
@@3duniverseOrgWelcomesYou I was afraid that was the case. Thank you for speedy confirmation.
How would this printer compare the Stratasys F170 other than cost?
Could this print a leg?
hello i have ultimaker 2 i can't reset the factory parameters on the 3 page gives the error Er05 swift Z i was measuring with a multimeter and it's ok how can i do it now i already connected usb cable and the computer does not detect the printer thanks for a help thanks.
How is recognise the type of filament and its colour?
Each spool of Ultimaker brand filament has an NFC chip that the Material Station reads to identify the type and color. If you use 3rd party filament, you need to select the material type manually using the touch panel on the printer.
How do these accessories work if you do not want to use Cura and prefer to use S3D?
Is it posble to with more that 2 materials at the same time?. For example TPU+PLA in nozzle 1 and PVA as support in nozzle 2?
No, printing with more than two materials in a single print is not supported. The Material Station is designed to automate the process of loading and unloading different materials, but you can still only select one material for each of the two extruders for any given print job.
10,000 us for this really
How difficult would this to be to add this to my current s5?
Not difficult at all! Check out the Ultimaker Pro Bundle Upgrade: shop3duniverse.com/collections/ultimaker-s5-related-accessories/products/ultimaker-pro-bundle-upgrade
Isint the particles emitted by abs smaller than hepa size ?
Hepa is for chemicals :D Nothing to do with 3d printing. The only particles when the extruder shred the filament. But then in the front can go out without filter.
How much does this setup cost?
shakaworld 9100$
@@owencoyne6223 😂
Dont just talk and not action show the actual printing to proven the product is wokring well and printing quality are good.
12 thousand dollars? good lord!
$10000!!!!!
Yes, its 3k for the spool holder that does not dry the material or really appear to do a great deal other than feed the material into the extruder? The issue I have with even a 10k machine is even with all the fancy additions...its still very slow. Maybe not slow for where we are for 3D printing at this stage...but ultra slow in regards to anything related to actual production or what they call "industrial." I own 3D printers and they are all very enjoyable to use for prototyping which doesn't really require a great deal of speed but beyond that...your almost alway better off getting multi-machines that can do the specific requirements that you are looking for. Even a double extruder is almost always shown printing two objects out side by side. If that is what you want to use a double extruder for than you are 100% better off simply buying a second machine...your paying a hefty price for a second extruder. Just my thoughts.
It is beuatiful...Too bad the price is so disgusting. First thing to buy if i do win the lottery.
A HEPA filter eh ?, A single, double or if your rich, Triple toilet paper will filter down to 1mn. Kitchen roll will do the same job. JOB. Kerching me bud.
Yeah bro, toilet paper will do what engineered filters can and more. Just add more toilet paper layers right? They should just use toilet paper on the space station, after all it's so great.