NISSAN ROGUE TRACTION CONTROL LIGHT (SKID LIGHT) FIX!!! NO DTCS IN THE SYSTEM.
Вставка
- Опубліковано 10 жов 2017
- THIS VIDEO WILL SHOW YOU HOW I FIXED 2015-2017 NISSAN ROGUE TRACTION CONTROL LIGHT (SKID LIGHT) ON THE DASH PANEL. THERE WAS NO TROUBLE CODES IN THE SYSTEM.
Disclaimer:
Warnings And Caution!!!!
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
Disclaimer:
Warnings And Caution!!!!
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
I have a 2013, exact same problem with the 2 lights on, no issues found after scan and it got fix with this video... Thanks a lot for sharing! Much appreciated 👍🏼
Muchas gracias me funcionó mucho el video, tenia encendida la alerta de
Going to try my daughter’s Rogue tomorrow.
Had the same problem. It was low on break fluid….fixed the problem
my wife has a 2016 rogue with this same issue also has a p2004 intake manifold runner, had the vehicle scanned and it said can-bus communication error in regards to the traction control issue, the light goes off when you turn off and restart so i just restarted the car and left the traction control switch off but I will check this fuse tomorrow.
My nissan rogue 2016 get a Blake and traction light indication. Please help
Do you have any idea what caused the fuse to blow? I’m a Nissan tech currently dealing with this same issue. C/s they have had all harnesses replaced by Nissan. Same fuse was blown for me as well
Think this is mine aswell would the light come and go?
I don't understand why people have to ramble so much. You seem like a great guy. I trust that you ran to check for error codes. You don't have to show that here. For everyone else, start at
Thank you! What’s the name of your specific scanner please?
Please, l have a 2012 Nissan Note automatic with same issue. It had an accident and was repaired. I have been driving for over a year and then the spiral clock spring failed. After replacing, this traction light has since remained on the dash. It was scanned at the garage and repaired as it went off. But soon when you drive a few yards, it comes up again. The steering angle sensor has been changed the second time but no positive results. I have watched your video, but l can't locate the particular fuse you are talking about.
Great video. I have a Nissan Altima 2016 with same problem. But my fuse BCM SW is 5A , I checked and it's not burned. I don't see any other fuse 10A BCM.
Hey George how are you? What was the name of the scan tool you bought off amazon. I would like to purchase one
i am having same problem with my Nissan Qashqai 1.6 Petrol 2012, i had issue with Airbag fault and i change the clock spring and that fault resolved but ESP light off and slip indicator light stays on. and that button i have in the car for ESP don't work either it might be the fuse blown off, i did diagnostic on my car but there is no fault. Thank for put up this video i am going to change fuse and i will see
which scanner do you have ?
wife Versa did it this morning, her car was bought used and prob in a couple of fender benders. Prob the same situation.... every now and then she gets an air bag light to that come and goes when it want too....
Great info. Both my slip indicator light and VDC light are always lit on the dash. I am going to check fuses. I would not have thought of that.
Hi, what's the name of the scanner you using on Amazon?
I have same issue but mine goes away after turning vehicle off and on until it's gone. It does ride weird when that light comes on. 🤷♂️
Thanks for the info. What is that scan tool you are using?