TCS Motorsports intercooler kit install 3rd Gen 3SGTE MR2

Поділитися
Вставка
  • Опубліковано 26 сер 2024
  • Installing TCS Motorsports intercooler kit.
    1992 MR2 N/A
    3rd Gen 3SGTE Swap
    TCS INTERCOOLER KIT:
    www.tcsmotorsp...

КОМЕНТАРІ • 19

  • @autostationfanatic
    @autostationfanatic 3 роки тому +2

    You need to make another video with it Running on the road. Sounds really good in the garage

    • @andongf4338
      @andongf4338  3 роки тому +1

      I’m going to try and do one next year once weather gets better.

  • @marekpelikan9873
    @marekpelikan9873 2 місяці тому

    Does anybody know, what is the limit for this intercooler?

  • @Cjay2290
    @Cjay2290 2 місяці тому +1

    On that that lil pipe u was putting ur finger on in the last few sec of the clip that had vaccum, what did you end up doing with it, im doing the same thing as you but im clueless as to what im suppose to do with that pipe since the hose dont connect to the intercooler pipping

    • @andongf4338
      @andongf4338  2 місяці тому +1

      I installed a really small air intake filter. I believe I purchased it at Autozone.

    • @Cjay2290
      @Cjay2290 2 місяці тому +1

      @@andongf4338 thank you so much for replying i looked all over and couldn’t find a answer. Now my next hunt is to find how to install the HKS SLD to remove the dam speed limit japan has on the 3rd gen 3sgte lol

    • @andongf4338
      @andongf4338  2 місяці тому

      @@Cjay2290 yep no problem. With the HKS lsd, can’t help you out with that one. My 3rd gen doesn’t have it.

  • @IzunaDrop247
    @IzunaDrop247 2 роки тому +1

    I just got my TCS IC Piping. At 6:30, that part you just leave open?

    • @andongf4338
      @andongf4338  2 роки тому +1

      I installed a small air filter on it that I bought at Autozone. www.autozone.com/intake-system/universal-air-filter/p/spectre-black-breather-filter/415841_0_0?cmpid=LIA:US:EN:AD:NL:1000000:GEN:10574827360&gbraid=0AAAAADkcoVu1LojhX83h3CQmzsTFGJC8m&gbraid=0AAAAADkcoVu1LojhX83h3CQmzsTFGJC8m&gclid=EAIaIQobChMIo9iHmefq9wIVFcLCBB23wQdPEAQYASABEgI69PD_BwE&gclsrc=aw.ds

  • @fsal5687
    @fsal5687 3 роки тому +1

    I just received mine today here in Japan. What was the most difficult part of the removal and install? I’m removing my down pipe as well to install my Berk.

    • @andongf4338
      @andongf4338  3 роки тому +2

      Most difficult part I would say is removing the intercooler. I had a tough time getting it out. Install is a lot easier.

  • @chaaarl848
    @chaaarl848 Рік тому +1

    Did you have to do that little bit of wiring for the fan or does the one they provide work

    • @andongf4338
      @andongf4338  Рік тому

      You don’t have to do it my way. The one that they provide will work. I used the old connector so that way I can easily disconnect it if I ever have to remove it for some reason.

  • @Soyblackpower
    @Soyblackpower 2 роки тому +1

    It looks like you used the original fan? Or did you use the 9 inch fan that TCS offers?

    • @andongf4338
      @andongf4338  2 роки тому

      I used the the fan that TCS offers with the kit.

  • @fsal5687
    @fsal5687 3 роки тому

    At the 24 second mark, you removed the pipe to the turbo. The small pipe sticking out had a line attached. What did you do with that extra line? I’m ready to put the pipes in but waiting for my VC to get done

    • @andongf4338
      @andongf4338  3 роки тому +1

      At 6:32 I believe that’s the small pipe you are talking about right? I installed one of those small little air filter intakes in it. Similar to the one on the right but a lot smaller.

  • @MoonMan3121
    @MoonMan3121 3 роки тому

    Did you have any issues lining up the cold side of the piping

    • @andongf4338
      @andongf4338  3 роки тому

      No I didn’t have any issues, it lined up pretty well.